Generic
Showing 721–768 of 6083 results
-
-
PVC wire
5 Meter UL1007 28AWG PVC Electronic Wire (Black)
SKU: 528355The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528355 -
-
Relay Modules
Red Mushroom Cap LAY37-, 11ZS 1NO 1NC DPST, Emergency Stop Push, Button Switch AC 690V 10A, Switch Equipment Lift, Elevator Latching Self Lock
Relay ModulesRed Mushroom Cap LAY37-, 11ZS 1NO 1NC DPST, Emergency Stop Push, Button Switch AC 690V 10A, Switch Equipment Lift, Elevator Latching Self Lock
SKU: 1121394- Rated Insulation Voltage (Ui) : 600V
- Agreed Thermal Current (Ith):10A
- Switch Top Diameter: 39 mm
- Switch Mount Neck Diameter: 23 mm
- Insulation Resistance:≤≥60MΩ
- Contact Resistance: ≤ 25mΩ
- Ambient air temperature: -25°C ~ +40°C
SKU: 1121394 -
Light Dependent Resistors (LDR), Light/color Sensor
12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
Light Dependent Resistors (LDR), Light/color Sensor12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
SKU: 611822- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70ËšC (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
SKU: 611822 -
-
Battery Pack Accessories & Holders
2 X 3 18650 Battery, Holder with 18.5MM, Bore Diameter
SKU: 1121236- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1121236 -
4S Li-ion BMS
4S 10A 18650 Lithium Battery Protection Board
SKU: 618341- Model; HX-4S-A10
- This protection board is suitable for 4 series Li-ion cell.
- Adopt a precision integrated circuit for fast and safe charging.
- Support overcharge protection, over-discharge protection, and short circuit protection.
SKU: 618341 -
-
USB Interface Module
6Pin FTDI FT232RL FT232 Module For Arduino USB to TTL UART Serial Wire Adapter RS232
USB Interface Module6Pin FTDI FT232RL FT232 Module For Arduino USB to TTL UART Serial Wire Adapter RS232
SKU: 766319- Product: 6Pin FTDI FT232RL FT232 Module For Arduino USB to TTL UART
- Connector type: USB To TTL RS232
- Input Supply voltage: 3.3 ~ 5V
- The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
SKU: 766319 -
-
-
-
DIY Hobby Project Parts
10Pin Alligator Clips Jumper Wires Crocodile Dupont Line with Male Connector Cable for DIY Connection – 20cm
DIY Hobby Project Parts10Pin Alligator Clips Jumper Wires Crocodile Dupont Line with Male Connector Cable for DIY Connection – 20cm
SKU: 1017146- Colour: Red, Blue, Yellow, White, and Black.
- Connector Type: Crocodile Pins and Male Dupont Connector
- Color-coded insulated leads allow you to test circuits without crossing wires or causing shorts with each other.
SKU: 1017146 -
Carbon Fiber Tubes and Rods
3K Roll-wrapped Carbon Fibre Tube (Hollow) 16mm(OD) * 14mm(ID) * 1000mm(L)
Carbon Fiber Tubes and Rods3K Roll-wrapped Carbon Fibre Tube (Hollow) 16mm(OD) * 14mm(ID) * 1000mm(L)
SKU: 653498- Made of Carbon Fiber material
- High Strength
- Stable dimension and UV resistant
- High Corrosion Resistance
- High Thermal Conductivity in some forms
- Low coefficient of thermal expansion
- Non-poisonous
SKU: 653498 -
-
Sensor Kits
37 in 1 Sensors Kit compatible with Arduino
SKU: 31812- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
SKU: 31812 -
-
-
Current and Voltage Sensor
SCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor
Current and Voltage SensorSCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor
SKU: 43399- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Meet UL94-V0 flame retardant properties
SKU: 43399 -
-
Lead Screw and Nut
400mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw and Nut400mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
SKU: 12043- Lead Screw Material: 304 Stainless Steel.
- Length: 400mm.
- Diameter: 8mm.
- 4 Start Lead Screw
- Brass Nut Size: 10 x 13 x 22 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
SKU: 12043 -
PVC wire
5 Meter UL1007 28AWG PVC Electronic Wire (Red)
SKU: 528364The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528364 -
-
Water TDS, pH, Flow, Level and Pressure Sensor
Analog TDS Sensor Module Normal Quality
SKU: 890181- Wide voltage operation: 3.3~5.5V
- 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
- The excitation source is an AC signal, effectively preventing probe polarization
- Waterproof probe for long-term immersion in water
SKU: 890181 -
-
Straight Type DC BO Motors
110 RPM Half Metal Gear BO Motor – Straight
SKU: 766342- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~6
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 110 RPM
- Rated Torque: 1 Kgcm
SKU: 766342 -
-
-
N20 Metal Gear Motors
N20-6V-30 RPM Micro Metal Gear-box DC Motor
SKU: 470837- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 470837 -