Generic
Showing 1729–1776 of 6083 results
-
-
-
-
-
-
Raspberry Pi Case
ABS Transparent Case for Raspberry Pi Zero/ Zero W
SKU: 456221- Use for – both raspberry pi zero w and v1.3
- GPIO reference on the top of the case – you needn’t look at the GPIO reference from screen, paper or rule.
- The hole on the bottom of the case –   you can change the case on the wall by the hole.
- Translucent color design – make the case more beautiful and you can see the pi in the case.
SKU: 456221 -
3D Printer Extruder Parts and Fans
2mm x 3mm PTFE Teflon Tube for 1.5 mm 3D Printer Filaments
SKU: 1308003- Color: White
- Inner diameter: 2 mm
- Outer diameter: 3 mm
- It is used for the E3D V6 Extruder.
- Operating Temperature Range: -180°C to +260°C
- It has unique lubricity and the surface is no sticky.
- Material: PTFE
- Length: 1 Meter
SKU: 1308003 -
-
-
-
-
Battery Pack Accessories & Holders
5 X 7 18650 Battery Holder with 18.5MM Bore Diameter
SKU: 1187475- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187475 -
USB Interface Module
CP2102 MICRO USB to UART TTL Module 6Pin Serial Converter UART STC Replace FT232
USB Interface ModuleCP2102 MICRO USB to UART TTL Module 6Pin Serial Converter UART STC Replace FT232
SKU: 1165424- 5P – A type USB USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 5pin connector.
- 5pins for 3.3V,TXD,RXD,GND & 5V All handshaking and modem interface signals
- Baud rates: 300 bps to 1.5 Mbps.
- Byte receives buffer; 640 byte transmit buffer.
SKU: 1165424 -
-
-
-
-
PIC Programmer
EZP2019+ High Speed USB SPI Programmer Support 24/25/26/93 Series Chip EEPROM Flash Bios Standard configuration
PIC ProgrammerEZP2019+ High Speed USB SPI Programmer Support 24/25/26/93 Series Chip EEPROM Flash Bios Standard configuration
SKU: 1150751- Material: ABS+PCB
- Type: 1-3 (optional)
- USB interface: USB 2.0 interface
- Support 24/25/26/93 series chips
- Programmer size: 71 * 44 * 19mm
- Programmer weight: 37g
- Package size: 150 * 100 * 38mm
- Package weight: Type 1: 113g
SKU: 1150751 -
-
-
Water TDS, pH, Flow, Level and Pressure Sensor
FS-IR02B Diameter 14MM Water Protection Water Level Sensor Photoelectric Water Level Sensor
Water TDS, pH, Flow, Level and Pressure SensorFS-IR02B Diameter 14MM Water Protection Water Level Sensor Photoelectric Water Level Sensor
SKU: 1150752- Model: FS-IR02
- Type: Photoelectric Liquid Level Sensor
- Operating Voltage: 5V DC
- Output Current: 12mA
- Operating Temperature: – 25 ~ 105 °C
- Material: Polycarbonate
SKU: 1150752 -
Other Ultrasonic Sensors
Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board
SKU: 221002- Onboard STM8S103 high-performance microprocessor
- With digital tube display
- Valid Measurement Distance: 3-400cm
- Display Unit: cm
- Maximum Input Voltage: 5VDC
- 2.54mm White Socket: 5V power interface.
SKU: 221002 -
-
Battery Pack Accessories & Holders
2 x 26650 Battery Holder with 26.3MM Bore Diameter
SKU: 1187457- Model: 26650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 26.3MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for EBike!
SKU: 1187457 -