Generic
Showing 1825–1872 of 6083 results
-
-
3D Printer Nozzle
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.3mm (for 3D printer)
SKU: 294102Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
SKU: 294102 -
Carbon Fiber Tubes and Rods
Pultruded Carbon Fiber Tube (Hollow) 4mm(OD) * 2mm(ID) * 1000mm(L) (Pack of 2)
Carbon Fiber Tubes and RodsPultruded Carbon Fiber Tube (Hollow) 4mm(OD) * 2mm(ID) * 1000mm(L) (Pack of 2)
SKU: 653507- Made of Carbon Fiber material
- Very Strong and Light
- Smooth finish
- High Tensile Strength
- Excellent quality
- Resistance to ultraviolet light.
- Anti-aging and corrosion resistance.
SKU: 653507 -
-
Cooling Fans
DC5V 0.25A 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
Cooling FansDC5V 0.25A 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187556- 45mm Radial Cooling fan.
- 5V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187556 -
Battery Pack Accessories & Holders
Black 2 X CR2032, Button Battery Case, with Wire and Toggle, Switch
Battery Pack Accessories & HoldersBlack 2 X CR2032, Button Battery Case, with Wire and Toggle, Switch
SKU: 1121277- Product Name: 6V Battery Case With On/Off Switch
- Type: Wire Lead Type
- Fit Battery Model: CR2032
- Available Battery Quantity: 2
- Material: Plastic, Metal
- Outside Diameter: 32.5mm
SKU: 1121277 -
Electronic Switches/Keypads Modules
Blue Electronic Building Blocks Big Key Button Module High Level Output
Electronic Switches/Keypads ModulesBlue Electronic Building Blocks Big Key Button Module High Level Output
SKU: 1165421- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
SKU: 1165421 -
-
-
Plastic Gear Box Motor
DC Motor 45RPM 12Volts
SKU: 356386- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 30 RPM at 12V, the motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 4.2
- Stall Torque(kg-cm): 16
SKU: 356386 -
-
-
-
Electronic Switches/Keypads Modules
Red Electronic Building Blocks Big Key Button Module High Level Output
Electronic Switches/Keypads ModulesRed Electronic Building Blocks Big Key Button Module High Level Output
SKU: 1165444- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
SKU: 1165444 -
-
-
Raspberry Pi Case
Semi – Transparent Case for Raspberry PI 4B
SKU: 699625- Compatible for All variant of the Raspberry pi 4 Model B
- Easy to assemble without any Screws or Nut-Bolts
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- Mounting holes and anti-slip rubber feet at the back.
SKU: 699625 -
-
IoT Development Boards
Black ESP32-DEVKITC Development Board Backboard
SKU: 1308041The Black ESP32-DEVKITC Development Board Backboard is an accessory designed to support and facilitate the use of the ESP32-DEVKITC development board. It serves as a backboard or mounting platform for the ESP32-DEVKITC, providing stability and possibly additional features or connections for ease of use during development or testing processes.
SKU: 1308041 -
Relay Modules
433MHz 12V 4 Channel, Relay Module Wireless, Remote Control Switch, without Battery
SKU: 1121246- Working Mode: Output selectable between Latching and Non Latching types
- Relay Board Operating voltage: DC24V
- Working current: 50 ~ 200mA
- the operating frequency: 433MHz
- Application: 4 x AC 230V up to 10A
SKU: 1121246 -
-
-
-
Shield for Arduino
ESP8266 Serial WiFi Expansion Board Module for Arduino
SKU: 815831- 32-bit RISC architecture
- The processor can operate at 80MHz / 160MHz
- 32MB flash memory
- 64kB for instructions
- 96kB for data
- Standard native WiFi 802.11b / g / n
- Operates in AP, Station or AP + Station mode
SKU: 815831