Generic
Showing 3217–3264 of 6085 results
-
-
-
Raspberry Pi Displays
10.1 Inch IPS LCD Touch Screen 1280×800 with Driver Board Kit for Raspberry Pi
SKU: 1062474- Operating voltage: 12V
- Current requirement: 1A-2A
- Rated power: 6-7W
- HDMI input: version HDMI 1.1
- VGA input: 1280×800 physical resolution
- Brightness: 350 lumens
- Panel type: TFT
- Display Type: Capacitive Touch Display
- Number of wiring: 40 PIN LVDS
- Backlight: LED
SKU: 1062474 -
Lipo Voltage Checker
10-100V Universal LCD Car Battery Level, Capacity, Temperature Monitor
SKU: 975669- Working voltage:Â 10V Min;Â 100V Max
- Working consumption: 5mA Typical; 6mA Max
- Voltage accuracy:±0.1%Typical; ±0.5%
- Temperature accuracy:±0.5°cTypical; ±1°c Max
- Sleep consumption: 6uA Min; 10uA Typical; 12uA Max
- Buzzer voltage:Â adjustable 11.5V~100V
SKU: 975669 -
Relay Modules
433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch without Battery
SKU: 1150682- Operating voltage: DC 5V
- Operating temperature: -40~80 degrees
- Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
- Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
SKU: 1150682 -
-
Power Inductors
CD54 10μH Surface Mount Power Inductor (10 microH) 5pcs
SKU: 486143- Moisture Sensitivity Level: 1
- Halogen Free available.
- Tolerance(%): 20
- Operating temperature range: -40℃～+100℃
(including coil’s self temperature rise) - Storage temperature range: -40℃～+100℃
- Solder reflow temperature: 260 ℃ peak.
SKU: 486143 -
-
Audio Amplifier Module
TPA3116 2.1 50Wx2+100W Bluetooth CSR4.0 Class D Power Amplifier
SKU: 211063- Working mode: Class D
- Quiescent current: 60mA
- Work efficiency: 90%
- Rated output power: 100W + 2 x 50W
- Frequency response: 20Hz to 20KHz
- Operating voltage: DC18V to DC24V
- Maximum output current: 3A
SKU: 211063 -
(ESC) Drone Speed Controller
New ESC USB Linker Programmer For Simonk BLHeli Firmware SN/BL/16A/20A/30A/40A
(ESC) Drone Speed ControllerNew ESC USB Linker Programmer For Simonk BLHeli Firmware SN/BL/16A/20A/30A/40A
SKU: 127286- Direct plug design,
- Works with most USB port and USB extension cable
- Â Low power consumption design
- Onboard 2×3 Pin AVR ISP port
- Â 3pin servo connector can be used as servo or C2 connection
- Supports SIMONK and BLHELI ESC, KKflashtool compatible
- KKflashtool and RapidFlash compatible
Â
Â
SKU: 127286 -
-
Slide Switches
Slide Switch SK-08
SKU: 1883654- Items: Standard
- Rated voltage: 12V DC
- Rated current: 50mA
- Insulation resistance: 100 MΩ min.
- Insulation voltage: 100V DC
- Operating temperature range: -30 to 85℃
- Lifetime: 10,000 Cycles min.
- Operating force: 200 + 50gf or 200 – 50gf
- Travel: 1.5 + 0.1mm or 1.5 – 0.1mm
- Contact resistance: 50MΩ max
- Compressive strength: 110V AC for 50Hz/1 min
SKU: 1883654 -
Panel Indicator Lights
Green AC220V 22mm AD16- 22SM LED Signal Indicator Built-in Buzzer
SKU: 1364538- Model: AD16-22SM
- Easy for installation
- LED Signal Indicator Built-in Buzzer
- Good environmental Protections
- Very low Power consumption
- Available in various sizes, colors, and voltage rating
SKU: 1364538 -
-
-
-
-
-
-
Solenoids and Electromagnets
DC 24V Solenoid Valve 1/8″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
Solenoids and ElectromagnetsDC 24V Solenoid Valve 1/8″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
SKU: 975727- Valve Type: 2 Way Normally Closed
- Port Size: 1/8″ NPT Female Port
- Coil Voltage: DC 24V
- Dimensions (LxWxH): 57mm x 30mm x 22mm
- Flow Model: Uni-Directional
- Flow Rate: 0.23Cv (Fluid Flow)
- Response Time: Less than 50 ms
- Operating Pressure: 1.2Mpa
SKU: 975727 -
Power Inductors
CD54 15μH Surface Mount Power Inductor (15 microH) 5pcs
SKU: 486468- Moisture Sensitivity Level: 1
- Halogen Free available.
- Tolerance(%): 20
- Operating temperature range: -40℃～+100℃
(including coil’s self temperature rise) - Storage temperature range: -40℃～+100℃
- Solder reflow temperature: 260 ℃ peak.
SKU: 486468 -
-
3D Printer Nozzle
Cleaning Nozzle Drill 0.2mm(Price for Each Box, 10pcs/box)
SKU: 1308045- Length: 4cm
- Head Diameter: 0.2mm
- Shank Diameter: 3.17mm
- Size: 0.1mm to 1mm (Approx.)
- Color: Light Green
- These nozzle drill cleaners are powerful tools that any 3D printer owner must have.
- As blocks happen a lot during the printing, nozzles must be cleaned to ensure flowing printing.
SKU: 1308045 -
Smart Vision Cameras
1000X 3 in 1 USB Digital Microscope Camera Endoscope 8LED Magnifier with Stand 3-in-1 Type-c Electronic Magnifier Endoscope
Smart Vision Cameras1000X 3 in 1 USB Digital Microscope Camera Endoscope 8LED Magnifier with Stand 3-in-1 Type-c Electronic Magnifier Endoscope
SKU: 1150645- Specification: Magnification: 1000X
- Light source: 8 LED lights
- Resolution: 1920×1080, 640*480
- Pixel: 30W
- Focal length: 3-40mm manual adjustment
- Support Android 4.2 or above/widows/Mac system
SKU: 1150645 -
Relay Modules
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger, （with Guide Rail）
Relay Modules1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger, （with Guide Rail）
SKU: 1121223- Channel: 1 channel
- Comes with GUIDE RAIL
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: 1121223
