Generic
Showing 3505–3552 of 6085 results
-
Panel Indicator Lights
Red AC/DC24V 30mm AD16-30SM LED Signal Indicator Built-in Buzzer
SKU: 1364630- Model: AD16-30SM
- Easy for installation
- LED Signal Indicator Built-in Buzzer
- Good environmental Protections
- Very low Power consumption
- Available in various sizes, colors, and voltage rating
SKU: 1364630 -
TowerPro and Other Servo Motors
TowerPro MG958 Digital High Torque Metal Gear Servo Motor – Normal Quality
TowerPro and Other Servo MotorsTowerPro MG958 Digital High Torque Metal Gear Servo Motor – Normal Quality
SKU: 1278743- Operating Voltage: 4.8v-6.6v
- Stall Torque (4.8v): 18.0kg.cm
- Stall Torque (6.6v): 20.0kg.cm
- Servo arms & screws included and fit with Futaba servo arm
- CE & RoHS approved
- Servo case: Alloy case in the middle
- Gear Type: Metal gear
- Bearing: Double ball bearing
SKU: 1278743 -
Power Inductors
CD54 6.8μH Surface Mount Power Inductor (6.8 microH) 5pcs
SKU: 515961- Moisture Sensitivity Level: 1
- Halogen Free available.
- Tolerance(%): 15
- Operating temperature range: -40℃～+100℃
(Including coil’s self temperature rise) - Storage temperature range: -40℃～+100℃
- Solder reflow temperature: 260 ℃ peak.
SKU: 515961 -
-
-
USB Interface Module
FT232RL Download Line, USB to serial port Module, USB to TTL Flashing Cable, FT232 Upgrade Small Board with Shell
USB Interface ModuleFT232RL Download Line, USB to serial port Module, USB to TTL Flashing Cable, FT232 Upgrade Small Board with Shell
SKU: 1738333- USB to TTLFT232 flashing cable, download cable
- Defining row order:
- Red wire = VCC (5V)
- black wire = gnd
- white line = rxd
- green line = txd
- PCB reserved 3.3v
SKU: 1738333 -
Drone Frame and Accessories
Z35 V3 aluminium Folding Arm Tube Joint
SKU: 1363831- Outer Diameter:38 mm
- Inner Diameter: 35 mm
- A 5-Degree up-tilt angle is applied
- This item suit for Auto Edition RC Quadcopter Hexacopter Multicopter
- Easy to use and 100% Brand New
- With Screws for Center plate installing usage.
- Weight: 146 gm
SKU: 1363831 -
-
-
-
Battery Pack Accessories & Holders
Fireproof 3 X 5 18650 Battery Holder with 18.4MM Bore Diameter
SKU: 1187609- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
SKU: 1187609 -
-
Relay Modules
1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger, （with Guide Rail
Relay Modules1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger, （with Guide Rail
SKU: 1121225- Channel: 1 channel
- Comes with GUIDE RAIL
- Relay Voltage: 24V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: 1121225 -
-
-
-
Robot Kits and Parts
Metal Tank Robot Smart Car Chassis Kit (Black)
SKU: 781383- Very Easy to Assemble
- High-Quality Laser-cut Metal Chassis
- Precise Hole to assemble motors and Sensor
- High-Quality Wheels and 125 RPM BO Motors with Dual Straight Shaft
- Can be used for any electronics and Mechanical college project
SKU: 781383 -
Power Inductors
CD54 330?H Surface Mount Power Inductor (330 microH) 5pcs
SKU: 486616- Moisture Sensitivity Level: 1
- Halogen Free available.
- Tolerance(%): 10
- Operating temperature range: -40℃～+100℃
(including coil’s self temperature rise) - Storage temperature range: -40℃～+100℃
- Solder reflow temperature: 260 ℃ peak.
SKU: 486616 -
Other 3D Printer Accessories
MKS MOSFET Heating Controller for 3D Printer heat Bed/Extruder
SKU: 354349- The superior performance of MOSFET (Max 280A).
- An extra-large heat sink, the maximum current can be up to 30A or more.
- Can use hot-bed output signal of Ramp1.4 and MKS series to control.
- Can use the digital signal of 5-24v to control.
SKU: 354349 -
