Search results: “motor” – Page 14
Showing 625–672 of 1355 results
-
Drone Frame and Accessories
Holybro S500 V2 Kits (Included Motor, Prop and ESC)
SKU: 1777632- Model: Holybro S500 V2 Kits (Included Motor, Prop and ESC)
- Affordable and Complete Kit
- Lightweight and Easy to Assemble
- High-Quality Frame
- Built-in Power Distribution
- Adjustable Battery Mount
- ARF Kit Contents
- Recommendation for Compatibility
- Versatile Applications
SKU: 1777632 -
Smart Motor Drivers
SmartElex 15D Smart Motor Driver (Powered By Raspberry Pi)
SKU: 1734772- Support motor voltage from 7V to 22V.
- Onboard Low, Internal resistance MOSFETs are switched at 16 KHz frequency.
- Overcurrent and Thermal protection.
- Multiple input modes: RC, Analog, PWM, Serial Packetized.
- On-board push buttons for test and manual operation.
- Type-C USB for SERIAL Mode
SKU: 1734772 -
N20 Metal Gear Motors
N20-6V-400 Rpm Micro Metal Gear Motor
SKU: 75813- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 75813 -
-
3D Printer Extruder Parts and Fans
BIGTREETECH BTT EBB42 CAN V1.2 Stepper Motor Driver
SKU: 1611635- Application: For Connecting Klipper expansion device
- Support CAN Bus Connection
- More Stabe data transmission
- Shirt Delay longer distance
- Enhanced Safety
- Ease of usd
- Extensive expansion Ports
- Onboard TMC2209 Driver used for extruder
- Support 2 wire Or 4 wire PT100 or PT1000(max31865)
- 120R terminal resistance of CAN can be selected through the jumper cap
- Reserved RGB Port for illumination
- Onbaord ADXL345 accekerometer
- To Choose whether USB Provides power for motherboard Via jumper cap
- EBB42 CAN Applicable for 35/36/42mm Motors (to Prevent short circuit be careful not to get the pin head of the motherboard contacted with the metal)
SKU: 1611635 -
RC Car Wheel
65mm Robot Smart Car Wheel for BO Motor-Blue
SKU: 31487- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 27 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Blue
SKU: 31487 -
N20 Metal Gear Motors
N20-12V-200 RPM Micro Metal Gear Motor
SKU: 75762- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 75762 -
Best Prices, Brushed / Brushless DC motor Driver
L298N 2A Based Motor Driver Module – Good Quality
-24%Best Prices, Brushed / Brushless DC motor DriverL298N 2A Based Motor Driver Module – Good Quality
SKU: 43821- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip:Â L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
SKU: 43821 -
-
-
-
-
3D Printer Motor Drivers
Two Trees – Stepper Motor Driver TB6600 4A
SKU: 1645775- H bridge bipolar constant current drive.
- The biggest 4.0 A Eight kinds of output current are optional.
- The biggest 32 To subdivide 6 kinds of subdivision modes selectable.
- Input signal high-speed photoelectric isolation.
- A total of standard single pulse interfaces.
SKU: 1645775 -
-
-
-
-
-
-
-
-
Pololu Motor Drivers
Pololu TB67S249FTG Stepper Motor Driver Compact Carrier
SKU: 1607681- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Open-load detection
- Active-low error outputs indicate over-current, over-temperature, or open-load condition
- Compact size (0.6″ × 0.8″)
- 4-layer, 2 oz copper PCB for improved heat dissipation
SKU: 1607681 -
Pololu Motor Drivers
Pololu AMIS-30543 Stepper Motor Driver Carrier
SKU: 1607668- Compatible with 5Â V and 3.3Â V microcontrollers
- Integrated 5V regulator that can be used to supply an external microcontroller
- Integrated watchdog function
- Open coil detection
- Thermal warning indicates when the driver is close to the thermal shutdown temperature
- Over-current status and shutdown (short-to-ground and shorted-load protection)
- Reverse voltage protection
SKU: 1607668 -
-
Dimension Engineering Motor Drivers
Sabertooth Dual 5A Motor Driver for R/C
SKU: 4689- Operating Voltage(VDC): 6-18
- Peak Current (A): 10
- Continuous Current (A): 5
- No. of Channels: 2
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode-compatible with: 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
SKU: 4689 -
DC 37GB - 3530 Geared Motors
37GB-3530 DC12V 107RPM/MIN Reduction Motor
SKU: 1770421- Model: 37GB-3530
- Rated Voltage: 12V
- Revolving Speed: 107 RPM
- Shaft Type : D Type
- Gear Material: Full MetalModel: 37GB-3530
- Rated Voltage: 12V
- Revolving Speed: 107 RPM
- Shaft Type : D Type
- Gear Material: Full Metal
SKU: 1770421