Search results: “motor” – Page 18
Showing 817–864 of 1355 results
-
-
-
Orange 12V Johnson Geared Motor
EasyMech Bracket For SPG30E & Orange Johnson DC Geared Motor
SKU: 83641- Material: 1.5 mm thick MS steel
- Motor mounting side: Height 48 mm, Width 40 mm;
- Bracket mounting side: Length 30 mm, Width 40 mm
- The holes for Motor mounting: M3.
- Holes for Bracket mounting: M4.
- Weight: 32 gm
SKU: 83641 -
-
-
TowerPro and Other Servo Motors
TowerPro MG959 Full CNC Alloy Case High Torque Servo Motor
SKU: 618516- Operating voltage: 4.8v~6.0v
- Operating temperature range: -0~+55℃
- Operating speed (4.8v): 0.16sec / 60 degree at no load
- Operating speed (6.0v): 0.13sec / 60 degree at no load
- Stall torque @ 4.8V: 28.0kg.cm
- Stall torque @ 6.0V: 32.0kg.cm
- Gear type: metal gears
SKU: 618516 -
-
Cytron Motor Drivers
Cytron 10A Dual Channel DC Motor Driver Shield for Arduino Uno
SKU: 497899- Bidirectional control for two brushed DC motor.
- Control one unipolar/bipolar stepper motor.
- Buck regulator to produce 5V output (500mA max).
- Buttons for quick testing.
- LEDs for motor output state.
SKU: 497899 -
-
Carbon Fiber Propeller
T Motor NS24 x 7.2-10mm Hole Prop-2PCS/PAIR
SKU: 1339766- Model no: NS24 x 7.2-10mm
- pitch: 7.2 inch (182.88mm)
- Material: CF+Epoxy
- Diameter: 24 inch
- Recommended thrust: 3 – 7 / 3020 – 4590 RPM
- Light weight
- high quality build
- Light, efficient, long flight time
- Lower moment of inertia
- Scratch resistant
SKU: 1339766 -
-
-
-
-
-
-
Straight Type DC BO Motors
Pair 5V 200RPM Microbit TT DC, Motor 1:48
SKU: 1121374Rated Voltage: 3~6V
Continuous No-Load Current: 150mA +/- 10%
Min. Operating Speed (3V): 90+/- 10% RPM
Min. Operating Speed (6V): 200+/- 10% RPM
Torque: 0.15Nm ~0.60Nm
Stall Torque (6V): 0.8kg.cm
Gear Ratio: 1:48SKU: 1121374 -
-
-
-
-
-
3D Printer Motor Drivers
BIGTREETECH BTT TMC2225 V1.0 Stepper Motor Driver for 3D Printer
SKU: 1611659- 2-phase stepper motors up to 2A coil current (peak)
- STEP/DIR Interface with 4, 8, 16 or 32 microstep pin setting
- Smooth Running 256 microsteps by MicroPlyer interpolation
- StealthChop2 silent motor operation
- SpreadCycle highly dynamic motor control chopper
- Passive Braking and Freewheeling
- Single Wire UART & OTP for advanced configuration options
- Integrated Pulse Generator for standalone motion
SKU: 1611659 -
-
-
3D Printer Stepper Motors, Nema 23 Stepper Motors
57HM76-2804 NEMA 23 18Kg-cm Stepper Motor Round-Type
3D Printer Stepper Motors, Nema 23 Stepper Motors57HM76-2804 NEMA 23 18Kg-cm Stepper Motor Round-Type
SKU: 1551725- Model: 57HM76-2804
- Shaft Type: Round-Type
- Motor Body Length: 76mm
- Step Angle: 0.9°
- Current/Phase: 2.8A
- Resistance (Ω) /Phase: 1.15
- Inductance (mH/Phase): 5.6
- Holding Torque (kg-cm): 18
- No. of Leads: 4
SKU: 1551725 -
-
-
-
Nema 16 Stepper Motors
NEMA16 39HY38-0504 2.9Kg-cm Stepper Motor Round-Type Shaft
SKU: 1551704- Number of Phase: 2
- Step Angle: 1.8°
- Rated Voltage (V): 1.2
- Rated Current(A): 0.5A/phase
- Resistance (Ω): 24 Ω ± 10%/Phase
- Inductance (mH/Phase): 45 mH± 20%
- Shaft Diameter (mm): 5
- Holding Torque: 2.9 kg.cm
SKU: 1551704
