Search results: “e-bike freewheel” – Page 206
Showing 9841–9873 of 9873 results
-
-
Relay Modules
5V 6 Channel Low Level Relay Module with Light Coupling
SKU: 618463- 6-way relay output module contact capacity is 10A 250V.
- input IN1, IN2, IN3, IN4, IN5, IN6 signal, a low level is effective.
- Using single-chip design, reliable performance, strong anti-interference, no false triggering, superior performance.
- The trigger terminal has optocoupler isolation, the independent external power supply can trigger completely isolated.
- Each relay has an activity indicator light. With 4 fixed bolt holes, easy installation.
- Support all SCM control. It is applicable to the industrial sector, PLC control and home intelligent control.
SKU: 618463 -
Carbon Fiber Tubes and Rods
3K Roll-wrapped Carbon Fibre Tube (Hollow) 10mm(OD) * 8mm(ID) * 1000mm(L)
Carbon Fiber Tubes and Rods3K Roll-wrapped Carbon Fibre Tube (Hollow) 10mm(OD) * 8mm(ID) * 1000mm(L)
SKU: 653501- Made of Carbon Fiber material
- High Strength
- Stable dimension and UV resistant
- High Corrosion Resistance
- High Thermal Conductivity in some forms
- Low coefficient of thermal expansion
- Non-poisonous
SKU: 653501 -
-
AA
Duracell Rechargeable Batteries AA 2500mAh (Pack of 2)
SKU: 1044448- Battery Voltage:1.2 V
- Battery Capacity:2500 mAh
- Unused Duracell Recharge Ultra batteries are guaranteed to last 5 years and the Guarantee starts from the Date of Purchase.
- Duracell Rechargeable AA 2500mAh batteries come pre-charged, ready to use.
SKU: 1044448 -
-
Drone Transmitter and Receiver
FrSky RX8R Pro 2.4G ACCST 8/16CH SBUS Telemetry Receiver
SKU: 866207- Operating Voltage Range: 3.5V~10V
- Operating Current: 100mA@5V
- Operating Range: full range (>1.5km)
- Firmware Upgradeable
- Higher precision of PWM
- Lower latency on the PWM output
- Support redundancy function
SKU: 866207 -
-
-
Breakout Board
I2C Bi-Directional Logic Level Converter- 2 Channel
SKU: 835816- Dimensions: 11×15 x 2 (L x W x H) mm
- Weight: 1gm
- Mutual transform between 5V TTL and 3.3V TTL
- Two channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 4 pin contact pins
SKU: 835816 -
-
Relimate Connectors and Housings
XH-AW-2.5mm-2 pin Wafer Male Connector Through Hole Right Angle
SKU: R101413- MPN: XH-AW
- Brand: Boyu
- Rated voltage: 250V AC DC
- Rated current: 3A AC DC
- Contact resistance: 20MΩ
- Insulation resistance: 1000MΩ
- Operating temperature: -25ËšC to +85ËšC
- withstand voltage: 1000V AC/minute
SKU: R101413 -
PIR / IR and Optical Sensor
EasyMech Acrylic Bracket for Infrared Obstacle Avoidance IR Sensor Module (Pack of 4)
PIR / IR and Optical SensorEasyMech Acrylic Bracket for Infrared Obstacle Avoidance IR Sensor Module (Pack of 4)
SKU: 918589- EasyMech’s branded Acrylic brackets.
- Made up of good quality Acrylic.
- Specially designed for Infrared Obstacle Avoidance IR Sensor Module.
- Possess good stability and durability.
SKU: 918589 -
-
Water TDS, pH, Flow, Level and Pressure Sensor
YFS301 7-24V Water Flow Sensor Flowmeter 0.3-10L/Min
SKU: 1031152- Working voltage: DC1.8-7V(low consumption version)，7-24V(regular version), 7-24V(PLC version)
- Rated voltage:Â 7 to 24 V
- Pulse output duty cycle: 50+-10%
- Insulation resistance: 100M Ohm and above
- Input/Output Diameter: 9.5mm
SKU: 1031152 -
Temperature & Humidity Sensor
MAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature
Temperature & Humidity SensorMAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature
SKU: 43607- Internal integrated cold junction compensation circuit;
- With a simple three serial SPI interface;
- Temperature signal can be converted into 12-bit digital
- Embedded thermocouple break detection circuitry.
- High impedance differential inputs.
- Operating Voltage(VDC): 3 to 5.5
- Temperature Range(°C): 0 to +1024
- Cold Junction Compensation Range(°C): -20 to +80
SKU: 43607 -
-
Battery Connector
XT90 Male Connector with Housing-1 pcs.
SKU: 24730- Brand : Amass
- Gender: XT90 Male
- Metal connector size: 4.5mm
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
SKU: 24730 -
Battery Pack Accessories & Holders
4 X 5 32650 Battery Holder
SKU: 1676141- Model: 32650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 32.35MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1676141 -
Best Prices, Breakout Board
I2C Bi-Directional logic Level Converter- 4 Channel
SKU: 16919- Material: ABS + metal
- Dimensions: 16 x13 x 3 (L x W x H) mm
- Weight: 2gm
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
SKU: 16919 -
Battery Connector
T Type 9V Battery, Clips Connector, Buckle with Alligator, Clips – Pack of 2
SKU: 1121432- Excellent material
- It is an environmental 9V battery buckle
- The Cable Length: 12cm Approx.
- Convenient for connecting a battery to your application.
- Save power and protect the environment
- Good electrical conductivity and comfortable sense of touch
SKU: 1121432
