Search results: “21700 battery” – Page 23
Showing 1057–1104 of 1187 results
-
Battery Pack Accessories & Holders
Single Hole Electrical Insulating Adhesive Mat for Battery Cell terminal Insulation-10 Pcs.
Battery Pack Accessories & HoldersSingle Hole Electrical Insulating Adhesive Mat for Battery Cell terminal Insulation-10 Pcs.
SKU: 130303- Compatibility: 18650/18500 lithium battery
- Type: Single Cell
- No. of Rings in Package: 10
- Outer Ring Diameter is 17mm
- Inner Ring Diameter is 10mm
- Thickness: 0.25mm
SKU: 130303 -
JIABAIDA (JBD) BMS
JIABAIDA (JBD) LFP 19S 60.8V 40A Battery Management System- TP20S001-T V1.6
SKU: R112921- Battery Chemistry: Lithium Iron Phosphate (LFP)
- Battery Configuration: 19 series cells
- Nominal Voltage: 60.8 volts
- Maximum Continuous Discharge Current: 40 amps
- Cell Voltage Monitoring Range: 0V to 4.2V per cell
SKU: R112921 -
Best Prices, Battery Protection Board
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C
-48%Best Prices, Battery Protection BoardTP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C
SKU: 835842- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: 835842 -
Best Prices, Battery Protection Board
TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
-45%Best Prices, Battery Protection BoardTP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
SKU: 34697- Input voltage : 4.5V ~ 5.5V.
- Input Interface: Micro USB port.
- Charging method: linear charge.
- A full charge voltage: 4.2V.
- Power: 4.2 w.
- Charging accuracy: 1.5%.
- Operating Temperature: -10 to +85ºC
- Charging indicator: LED indicators for charging and full charging.
SKU: 34697 -
Battery Protection Board
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Mini USB
Battery Protection BoardTP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Mini USB
SKU: 53264- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection:Â 2.5 V
SKU: 53264 -
Ni-Mh | Li-po | Li-Ion Battery chargers
Ultra Power UP1800-14S 1800W 28A 6-14S LiPo/LiHV Battery UAV Drone Charger
Ni-Mh | Li-po | Li-Ion Battery chargersUltra Power UP1800-14S 1800W 28A 6-14S LiPo/LiHV Battery UAV Drone Charger
SKU: 1841040- Input Voltage (V AC): AC 110V-220V
- Battery Type: LiPo 4.20V/LIHV 4.35V/ LIHV 4.45V
- No. of Cells: 6-14S
- Charging Mode: Balance Charging Mode/Storage Mode
- Working Temperature Range (°C): 0-40°C
- Storage Temperature: -20-60°C
SKU: 1841040 -
Battery Pack Accessories & Holders
Black Plastic Storage Box Case Holder For Battery 4 X AA Cell Box with On/Off Switch
Battery Pack Accessories & HoldersBlack Plastic Storage Box Case Holder For Battery 4 X AA Cell Box with On/Off Switch
SKU: 44304- Holds 4 AA batteries
- With a cover and fixed screw
- With an ON/OFF switch
- Dimensions mm (LxWxH): 70 x 64 x 18
- Weight: 32 gm
- Material: Plastic
- Internal Connection: Series
SKU: 44304 -
Battery Protection Board
XH-M609 DC 12V-36V Charger Module Voltage Over Discharge Lithium Battery Protection Board
Battery Protection BoardXH-M609 DC 12V-36V Charger Module Voltage Over Discharge Lithium Battery Protection Board
SKU: 1269424- Model: XH – M609
- Power supply voltage:Â 12 V- 36 V battery
- Output voltage: Equal to power supply voltage
- Control precision: 0.1 V
- Power consumption: Less than 1.5 W
SKU: 1269424 -
Audio Amplifier Module
2x6W DC 5V 3.7V speaker modified Stereo Bluetooth amplifier board can connected lithium battery
Audio Amplifier Module2x6W DC 5V 3.7V speaker modified Stereo Bluetooth amplifier board can connected lithium battery
SKU: 1150679- Item Type: Amplifier Board
- Model: HF69B
- Supply Voltage: 5VDC or 3.7V lithium battery
- Applicable Speaker Impedance: 4 ohms, 6 ohms, 8 ohms
- Charging Interface: When using a lithium battery, the charging interface can be charged with a 5 volt power supply or a mobile phone charger to charge a single lithium battery.
SKU: 1150679 -
Best Prices, Battery Protection Board
5V Step-Up Power Module Lithium Battery Charging Protection Board USB For DIY Charger 134N3P
-33%Best Prices, Battery Protection Board5V Step-Up Power Module Lithium Battery Charging Protection Board USB For DIY Charger 134N3P
SKU: 62252- BAT Discharging Stop Voltage:2.9V
- Discharging Efficiency:85%(input 3.7V output 5V/1A)
- Charging and discharging indication
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ±1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
SKU: 62252 -
Ni-Mh | Li-po | Li-Ion Battery chargers
Ultra Power UP1200+ 1200W 25A 8 Channels 2-6S Battery UAV Drone Charger
Ni-Mh | Li-po | Li-Ion Battery chargersUltra Power UP1200+ 1200W 25A 8 Channels 2-6S Battery UAV Drone Charger
SKU: 1841036- Input Voltage (V AC): AC 110V or 220V
- Battery Type: LiPo/LiHV
- No. of Cells: 2-6S (also can charge 2S/3S radio battery)
- Port: 8 (4 ports per side)
- Charging Mode: Balance Charging Mode/Storage Mode
- Working Temperature Range (°C): 0-40°C
- Storage Temperature: -20-60°C
SKU: 1841036 -
-
Battery Harness
SafeConnect XT-90 Connector Harness for 2 Packs in Series Battery Adapter Cable (2M-1F)
Battery HarnessSafeConnect XT-90 Connector Harness for 2 Packs in Series Battery Adapter Cable (2M-1F)
SKU: 85696SafeConnect XT90 Harness for 2 Packs in Series allows you to connect two identical packs in series to effectively double the total voltage and cell count. Use this to construct a larger voltage pack out of two matching smaller packs.
SKU: 85696 -
-
4S Li-ion BMS
4S High Current up to 30A Lithium Battery Protection Board Four Series of 14.8V 16.8V
SKU: 502572- Overcharge detection voltage: 4.25 ± 0.025V
- Overcharge release voltage: 4.15 ± 0.05V
- Over-discharge detection voltage: 2.50 ± 0.08V
- Over-discharge termination voltage: 3 ± 0.1V
- Overcurrent: 20-30A
- Working current: 15A
SKU: 502572 -
-
Power Cables and Accessories, Power Adapter and Cable
Universal EU 3 Prong 2 Pin AC Battery Adapter Power Cord For B6 Charger
Power Cables and Accessories, Power Adapter and CableUniversal EU 3 Prong 2 Pin AC Battery Adapter Power Cord For B6 Charger
SKU: 45712- Current Rating: 16A
- Voltage Rating: 250V
- High Quality
- Universal AU 3-Prong AC Power Cord 3 Pin Adapter Cable.
- Compatible with most 3-port power adapters.
- Fit most laptops game players cameras printers AC power adapters or chargers.
SKU: 45712 -
Other ESP WIFI Modules
WeMos D1 ESP Wroom 02 Board ESP8266 Mini WiFi Nodemcu Module 18650 Battery
SKU: 51642- Operation and charging are possible at the same time.
- 18650 charging circuit including the 5V boosting circuit with TP5410.
- Overcharge protection, over-discharge protection built-in.
- One AD inputs.
- Micro USB inputs.
- The five buttons are controlled by FLATH, RSET, D5, D6, and D7 respectively.
SKU: 51642 -
-
-
Li-ion
99V 20A Lead-Acid/Lithium Battery Pack Series Charge-Discharge Tester DSF-20
SKU: R111239- Input Power: AC200V ~ 245V50/60HZ
- Applicable Batteries: Lead-Acid/Lithium batteries
- Charge Con-Voltage: 9V-99V
- Discharge Cut-off Voltage: 9V-99V
- Discharge Current: 0.5A-20A
- Charge Current: 0.5A-10A
- Operation Method: Panel/Online
SKU: R111239 -
Workbench Tools
BLACK+DECKER CD121B2-IN 12V 10mm Ni-Cd Cordless Variable Speed Drill with 2 Batteries
Workbench ToolsBLACK+DECKER CD121B2-IN 12V 10mm Ni-Cd Cordless Variable Speed Drill with 2 Batteries
SKU: R110281- BLACK+DECKER CD121B2-IN Cordless Drill
- 12V power with Ni-Cd batteries
- 8mm-10mm drilling capacity
- 17-position torque control
- Variable speed and reverse switch
- Mid-handle design for balance and reduced hand fatigue
SKU: R110281 -
Drone Transmitter and Receiver
Radiolink T8S 2.4GHz 8CH Transmitter + R8EF Receiver with Built-in Rechargeable Battery and Bluetooth for App control
Drone Transmitter and ReceiverRadiolink T8S 2.4GHz 8CH Transmitter + R8EF Receiver with Built-in Rechargeable Battery and Bluetooth for App control
SKU: 1374062- All New ergonomics design with the small size handy to use and travel.
- Three times faster than Open TX
- Built-in IS 900 mAh lithium battery
- Provides excellent anti-interference performance
- Super low battery consumption of 150 mA
- Unlimited models can be stored.
- Bluetooth connectivity for App control and use as a wireless emulator
SKU: 1374062 -
Best Prices, 3S Li-ion BMS
3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality
-14%Best Prices, 3S Li-ion BMS3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality
SKU: 43799- Three series of lithium battery protection board.
- Automatically cancel protection after protection conditions restore.
- Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
- Quiescent current < 30uA, so power consumption is small.
- With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
SKU: 43799