Search results: “e-bike freewheel” – Page 4
Showing 145–192 of 9772 results
-
e-Ink Paper Display
Waveshare 1.54inch 152×152 Yellow/Black/White Three-Color E-Ink Display Module
SKU: 1051926- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
SKU: 1051926 -
-
-
Tantalum Capacitors
TAJE477M010RNJ-KYOCERA AVX-Surface Mount Tantalum Capacitor, 470 µF, 10 V, 2917 [7343 Metric], ± 20%, 0.5 ohm, E
Tantalum CapacitorsTAJE477M010RNJ-KYOCERA AVX-Surface Mount Tantalum Capacitor, 470 µF, 10 V, 2917 [7343 Metric], ± 20%, 0.5 ohm, E
SKU: R101981- Brand: KYOCERA AVX
- MPN: TAJE477M010RNJ
- Capacitance(μF): 470
- Rated Voltage (V): 10
- Case / Package: 2917 [7343 Metric]
- Equivalent Series Resistance: 0.5ohm
SKU: R101981 -
-
IoT Development Boards
LILYGO SIM7600E-H Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board Unsoldered
IoT Development BoardsLILYGO SIM7600E-H Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board Unsoldered
SKU: 1031136- Main chip:ESP32 WROVER-E
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- Antenna: SIM Antenna，GPS Antenna
- Operating Temperature Range:-40-85 degrees
SKU: 1031136 -
e-Ink Paper Display
2.13 Inch High Refresh Rate Black & White E-Paper Good Display
SKU: 1641587- Refresh Method: Full refresh for 3s、Fast refresh for 1.3s、Partial refresh for 0.3s
- Display direction: Horizontal and vertical
- Drawing method: GUI Drawing
- Driving method: STM32、Arduino、MicroPython
- Product size: 2.13 inches
- Resolution: 250×112
SKU: 1641587 -
e-Ink Paper Display
Waveshare 2.13inch E-Ink Paper display HAT for Raspberry Pi, Three-Color
SKU: 223582- Display Resolution: 212 x 104
- Display Color: Red, Black and White
- No backlight keeps displaying last content for a long time even when power is down
- Ultra low power consumption, basically power is only required for refreshing
- Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
SKU: 223582 -
-
-
-
e-Ink Paper Display
Waveshare 1.9 inch Segment E-Paper Module for Temperature and humidity meter, Humidifier, Digital Meter
e-Ink Paper DisplayWaveshare 1.9 inch Segment E-Paper Module for Temperature and humidity meter, Humidifier, Digital Meter
SKU: 1373101- Product: 1.9inch Segment E-Paper Module, 91 Segments, I2C Bus,
- Operating Voltage: 3.3V/5V
- Interface: I2C
- Display Size:41.35 × 28.11 mm
- Segments: 91
- Display Color: Black/White
SKU: 1373101 -
-
Beagle Board
BeagleBone AI-64, TDA4VM, ARM Cortex-A72, 4GB RAM, 16GB eMMC, USB 3.0 Type-C, M.2 E-key
SKU: 1518900- Model: BeagleBone AI-64, TDA4VM
- Processor: Texas Instruments Jacinto TDA4VM 2x ARM Cortex-A7 2
- The maximum clock speed: 2 GHz
- Co-processor: C7x + MMA, 2xC66x, 12xPRU, 6xARM Cortex-R5, PowerVR Rogue 8XE GE8430, H.264 encode, H.264 / H.265 decode
- Network: Gigabit Ethernet M.2 key E PCIe / USB / SDIO slot
- Built-in sensors: CPU temperature sensor
SKU: 1518900 -
Kamoer Diaphragm Pumps
Kamoer 24V 6W 400ml/min KLP01.30-E-D24-B Diaphragm Liquid Pump
SKU: R101766- Delivers a flow rate of 400 ml/min.
- Operates on just 6W of power.
- Ensures reliable and consistent performance.
- Suitable for various industrial and scientific tasks.
- Easy to integrate into different setups.
- Built to withstand demanding environments.
SKU: R101766 -
e-Ink Paper Display
Waveshare 1.02inch 128×80 black/white dual-color E-Ink display module
SKU: 1051925- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
SKU: 1051925 -
e-Ink Paper Display
Waveshare 1.64inch square E-Paper Module (G) 168×168 Red/Yellow/Black/White
SKU: 1347906- Brand: Waveshare
- Product: 1.64inch square E-Paper Module (G), 168 × 168, Red/Yellow/Black/White
- Operating Voltage: 3.3V/5V
- Display Color: Red/Yellow/Black/White
- Interface: 3-wire SPI, 4-wire SPI
SKU: 1347906 -
Interfacing Cables
NGFF M.2 to PCI-E 4X Riser Card M2 Key M to PCIe X4 Transfer with LED Voltage Indicator for PCI Express 1X to 16X Adapter
Interfacing CablesNGFF M.2 to PCI-E 4X Riser Card M2 Key M to PCIe X4 Transfer with LED Voltage Indicator for PCI Express 1X to 16X Adapter
SKU: 1794498- Model: NGFF M 2
- Operating System: Linux, Windows Vista, Mac OS
- Hardware Interface: PCIE x 4, PCI
- Graphics Card Interface: PCI Express
- Compatible Devices: Personal Computer
- Compatible with PCI-E 1X / 4X / 8X / 16X slot.
- Support OS: Windows Vista / XP / 7 / 8, Linux, Mac.
SKU: 1794498 -
Seeed Studio SBC
reComputer J1010 Edge AI Device with Jetson Nano module, M.2 Key E Slot, Type-C connectors, Aluminium case, pre-installed JetPack System
Seeed Studio SBCreComputer J1010 Edge AI Device with Jetson Nano module, M.2 Key E Slot, Type-C connectors, Aluminium case, pre-installed JetPack System
SKU: 1252359- quad-core ARM® Cortex®-A57 MPCore processor
- 128-core NVIDIA Maxwell™ GPU with 128 NVIDIA CUDA® cores delivers 5 TFLOPs (FP16)
- Support wide range of AI application fast building with our ecosystem partners
- Storage: 16 GB eMMC 5.1 Flash
- Camera: 12 lanes (3×4 or 4×2) MIPI CSI-2 DPHY 1.1 (18 Gbps)
SKU: 1252359 -
-
-
USB Interface Module
Red 009SPLUS PCI-E Riser Extender, 1X to 16X, Graphics Card, PCIE Extension Cable Adapter Three Interface
USB Interface ModuleRed 009SPLUS PCI-E Riser Extender, 1X to 16X, Graphics Card, PCIE Extension Cable Adapter Three Interface
SKU: 1794504- Operating System: Linux
- Hardware Interface: USB
- Graphics RAM Type: 72-Pin EDO SIMM Memory
- Graphics Card Interface: PCI Express
- Graphics Coprocessor: PCI-E
- Compatible Devices: Desktop, Personal Computer, Tablet, Laptop
- Number of Ports: 3
SKU: 1794504 -
-
-
-
Seeed Studio SBC
A205 Carrier Board for Jetson Nano/Xavier NX/TX2 NX with compact size and rich ports (6 CSI Camera, 2 HDMI, 5 SATA, M.2 key E supported etc.)
Seeed Studio SBCA205 Carrier Board for Jetson Nano/Xavier NX/TX2 NX with compact size and rich ports (6 CSI Camera, 2 HDMI, 5 SATA, M.2 key E supported etc.)
SKU: 1249206- Brand: Seeed Studio
- Product: A205 Carrier Board
- Ethernet: 2x Gigabit Ethernet (10/100/1000M)
- PCB Size / Overall Size: 170mm x 100mm
- SATA: 1 x 5 SATA
SKU: 1249206 -
-
Tantalum Capacitors
293D477X9010E2TE3-VISHAY-Surface Mount Tantalum Capacitor, TANTAMOUNT®, 470 µF, 10 V, 2917 [7343 Metric], ± 10%, 0.5 ohm, E
Tantalum Capacitors293D477X9010E2TE3-VISHAY-Surface Mount Tantalum Capacitor, TANTAMOUNT®, 470 µF, 10 V, 2917 [7343 Metric], ± 10%, 0.5 ohm, E
SKU: R101979- Brand: VISHAY
- MPN: 293D477X9010E2TE3
- Capacitance(μF): 470
- Rated Voltage (V): 10
- Case / Package: 2917 [7343 Metric]
- Equivalent Series Resistance: 0.5 ohm
SKU: R101979 -
-
-
-
Tantalum Capacitors
293D227X9016E2TE3-VISHAY-Surface Mount Tantalum Capacitor, TANTAMOUNT®, 220 µF, 16 V, 2917 [7343 Metric], ± 10%, 0.5 ohm, E
Tantalum Capacitors293D227X9016E2TE3-VISHAY-Surface Mount Tantalum Capacitor, TANTAMOUNT®, 220 µF, 16 V, 2917 [7343 Metric], ± 10%, 0.5 ohm, E
SKU: R101978- Brand: VISHAY
- MPN: 293D227X9016E2TE3
- Capacitance(μF): 220
- Rated Voltage (V): 16
- Case / Package: 2917 [7343 Metric]
- Equivalent Series Resistance: 0.5ohm
SKU: R101978 -
NVIDIA Boards
reComputer J4012-Edge AI Device with Jetson Orin™ NX 16GB module, 4xUSB 3.2, M.2 Key E & Key M Slot, Aluminum case, Pre-installed JetPack System on 128GB NVMe SSD (Without Adapter)
NVIDIA BoardsreComputer J4012-Edge AI Device with Jetson Orin™ NX 16GB module, 4xUSB 3.2, M.2 Key E & Key M Slot, Aluminum case, Pre-installed JetPack System on 128GB NVMe SSD (Without Adapter)
SKU: 1494161- On-device processing with up to 100 TOPS AI performance with low power and low latency
- Compact size at 130mm x 120mm x 58.5mm
- Includes Jetson Orin NX production module,
- Onboard cooling fan with a heatsink, and an enclosure.
- Supports desktop, and wall mount.
- 4x USB 3.2, HDMI 2.1, 2xCSI, 1xRJ45 for GbE, M.2 Key E, M.2 Key M, CAN, and GPIO
- Pre-installed JetPack 5.1 on the included 128GB NVMe SSD, Linux OS BSP, 128GB SSD, support Jetson software and leading AI frameworks and software platforms
- FCC, CE, RoHS, UKCA comprehensive certificates
SKU: 1494161 -
Seeed Studio SBC
reComputer J3011-Edge AI Device with NVIDIA Jetson Orin™ Nano 8GB module, 4xUSB 3.2, WiFi/BT, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPack™ on 128GB NVMe SSD (Without Adapter)
Seeed Studio SBCreComputer J3011-Edge AI Device with NVIDIA Jetson Orin™ Nano 8GB module, 4xUSB 3.2, WiFi/BT, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPack™ on 128GB NVMe SSD (Without Adapter)
SKU: 1529215- The reComputer J3011 is an advanced Edge AI device equipped with NVIDIA Jetson Orin™ Nano 8GB module for high-performance computing.
- It comes with 4 USB 3.2 ports, WiFi/BT, M.2 Key E & Key M Slot, and an aluminum case for durability and connectivity options.
- The device is pre-installed with the JetPack system using NVIDIA JetPack™ on a 128GB NVMe SSD for seamless performance and convenience.
SKU: 1529215 -
Seeed Studio SBC
reComputer J3010-Edge AI Device with NVIDIA Jetson Orin™ Nano 4GB module, 4xUSB 3.2, WiFi/BT, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPack™ on 128GB NVMe SSD(without power adapter)
Seeed Studio SBCreComputer J3010-Edge AI Device with NVIDIA Jetson Orin™ Nano 4GB module, 4xUSB 3.2, WiFi/BT, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPack™ on 128GB NVMe SSD(without power adapter)
SKU: 1529214- The reComputer J3010-Edge AI Device is a high-performance computing device designed for AI and machine learning applications.
- It features the NVIDIA Jetson Orin Nano 4GB module, which provides excellent processing power for complex computations.
- The device comes with 4xUSB 3.2 ports, allowing for multiple peripheral connections.
- WiFi/BT connectivity is built-in, providing easy access to wireless networks and Bluetooth devices.
- The device has an M.2 Key E and Key M Slot, which allows for expansion with additional hardware.
SKU: 1529214
