Motors | Drivers | Pumps | Actuators
Showing 193–240 of 1626 results
-
-
Futaba servo cable
SafeConnect Twisted 60CM 22AWG Servo Lead Extension (Futaba) Cable
SKU: 248711- High-Quality cable
- One male and one female connector.
- Twisted 60 cm Servo Lead Extention (Futaba)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
SKU: 248711 -
N20 Metal Gear Motors
N20 Micro Gear 12V 100RPM DC Motor (High Torque)
SKU: 17635- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 17635 -
Stepper Motor Drivers
ULN2003A Driver Module Stepper Motor Driver
SKU: 28379- 5-12V power supply
- 4-way signal indicator
- Chip all the pins have Input leads Mounted for easy connection to use
- XH-5P socket can be connected directly 28BYJ-48 Model stepper motor
- Dimensions: 32 x 18 x 11mm (LxWxH)
- Weight: 3 gm
SKU: 28379 -
N20 Metal Gear Motors
N20-6V-300 Rpm Micro Metal Gear Motor
SKU: 75800- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 75800 -
Cytron Motor Drivers
Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
SKU: 381249- Bidirectional control for two brushed DC motor.
- Control one unipolar/bipolar stepper motor.
- Operating Voltage: DC 4V to 16V
- Maximum Motor Current: 3A continuous, 5A peak
- Buck-boost regulator to produce 5V output (200mA max).
- Buttons for quick testing.
SKU: 381249 -
3D Printer Extruder Parts and Fans, Cooling Fans
Small 5V 140mA Turbo Air Intake Fan (Size: 40x40x20mm)
3D Printer Extruder Parts and Fans, Cooling FansSmall 5V 140mA Turbo Air Intake Fan (Size: 40x40x20mm)
SKU: 52674- Operating Voltage: 5V DC
- Operating Current: 140mA
- Normal Operating Temperature: 25°C-45°C.
- Weight: 26 gm.
- Life Expectancy: Dual Ball Bearing: 50000 hours.
- Sleeve Bearing: 20000-25000 hours.
- Reliable quality as well as Competitive price.
- Large volume flow and long life expectancy.
- High speed and large airflow.
- Low noise and high efficiency.
SKU: 52674 -
Orange 12V Rectangular Gearbox Motor
Orange TT555 12V 70RPM Rectangular gearbox DC motor for DIY Project Encoder Compatible
Orange 12V Rectangular Gearbox MotorOrange TT555 12V 70RPM Rectangular gearbox DC motor for DIY Project Encoder Compatible
SKU: 542698- Rated current (mA): ≤2500.
- Rated power (W): 6.655.
- Rated Torque (N-m): 1.120
- Rated speed: 65 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 4500.
- Back shaft for Encoder Available
SKU: 542698 -
-
Other Metal Geared Motors
30RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU: 1137801- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 30 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 5.7
- Stall Torque(kg-cm): 18
SKU: 1137801 -
Other Servo Accessories
Cellmeter 8 Multi-Functional Digital Power Servo Tester
SKU: 57763- Balance Discharge Current: 90mA × 8 Cell(Max@Cell Voltage 4.2v)
- Servo Test Frequency: 50Hz, 60Hz, 100Hz, 125Hz, 200Hz, 250Hz, 300Hz,
- Battery Voltage Test Precision: 0.001V
- Support Battery Type:Â Can test Li-Po, Li-ion, Li-Fe (2-8S), NiCd, NiMH(4-8S) battery
- High visibility LCD display screen
- Port for balance plug for up to 8 cell Lipo, LiFe, or Li-Ion batteries
- Can be used as Servo tester to test standard and narrow servos.
- Port for discharge plug of NiMh/NiCd batteries
SKU: 57763 -
-
-
-
JR Servo cable
15 CM Servo Lead Extention (JR) 26AWG-1Pcs.
SKU: 4143- JR male plug and JR Female plug, compatible each other
- Servo extension cable, 3 pin female to male connector
- For RC Car, plane and helicopter servo connection or receiver connection.
- Wire Length: 150mm
- Color: As the pictures shown.
SKU: 4143 -
Other Metal Geared Motors
60RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU: 1137805- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 60 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 3.6
- Stall Torque(kg-cm): 15
SKU: 1137805 -
-
-
TowerPro and Other Servo Motors
TowerPro MG958 Digital High Torque Metal Gear Servo Motor
SKU: 618511- Operating Voltage: 4.8v-6.6v
- Stall Torque (4.8v): 18.0kg.cm
- Stall Torque (6.6v): 20.0kg.cm
- Servo arms & screws included and fit with Futaba servo arm
- CE & RoHS approved
- Servo case: Alloy case in the middle
- Gear Type: Metal gear
SKU: 618511 -
Stepper Motor Drivers
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
SKU: 16048- Supply Voltage: 12V
- Standard interfaces (as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A added to protect the component parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
SKU: 16048 -
TowerPro and Other Servo Motors
TowerPro MG945 Digital High Speed Servo Motor – Standard Quality
SKU: 618526- Stall torque: 10kg/cm (4.8v); 12kg/cm (6v)
- Operating voltage: 4.8 ~ 6.6v
- Temperature range: 0- 55deg
- Gear Type: Metal gear
- Dead band width: 1us
- servo wire length: 32cm
- Servo Plug: JR (Fits JR and Futaba)
SKU: 618526 -
-
Cooling Fans
DC 24V 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187539- 45mm Radial Cooling fan.
- 24V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187539 -
Other Metal Geared Motors
10RPM 12V Low Noise DC Motor With Metal Gears – Grade A
SKU: 1137797- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 7
- Stall Torque(kg-cm): 28
SKU: 1137797 -
Other Metal Geared Motors
150RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU: 1137798- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 150 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2
- Stall Torque(kg-cm): 7.8
SKU: 1137798 -
-
-
-
-
-
Cytron Motor Drivers
Advanced Auto-Calibrating Line Sensor LSA08
SKU: 6182- 8 sensor pairs spaced 16mm.
- 12V input power
- Onboard Mode and a Select button for instant configuration of LSA08
- LCD display unit showing 8 sensors analog value with bar chart and line position.
- Simple Auto-Calibration function to the line following surface.
- Low current consumption (typically 26mA)
- Works on glossy or reflective surface
- Refresh rate up to 200Hz.
SKU: 6182 -
-
Solenoids and Electromagnets
DC24V P30/25 Electric Sucker Electromagnet 15KG
SKU: 879230- Operating Voltage: 24V DC
- Lifting Capacity: 15KG
- Size (D x L): 30 x 25 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 879230 -
-
Plastic Gear Box Motor
DC Motor – 150RPM – 12Volts
SKU: 5683- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 150 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2
- Stall Torque(kg-cm): 7.8
SKU: 5683 -
Solenoids and Electromagnets
DC 12V Solenoid Valve 1/4″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
Solenoids and ElectromagnetsDC 12V Solenoid Valve 1/4″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
SKU: 975725- Valve Type: 2 Way Normally Open
- Port Size: 1/4″ BSP Female Port
- Coil Voltage: DC12V
- Flow Model: Uni-Directional
- Flow Rate: 0.23Cv (Fluid Flow)
- Response Time: Less than 50 ms
- Operating Pressure: 1.2Mpa
SKU: 975725 -
Cytron Motor Drivers
Cytron 10 A Switch Control Potentiometer DC Motor Driver (MD10POT)
SKU: 234226The MD10-POT control circuit is designed to enable the speed to be controlled via a potentiometer (10K Ohm) which is included in the package. It does not work with analog voltage from an external controller The 3-way rocker switch is used for start/stop and direction control.
SKU: 234226 -
Futaba servo cable
SafeConnect Twisted 45CM 22AWG Servo Lead Extension (Futaba) Cable
SKU: 248819- High-Quality cable
- One male and one female connector.
- Twisted 45 cm Servo Lead Extention (Futaba)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
SKU: 248819
