Motors | Drivers | Pumps | Actuators
Showing 97–144 of 1626 results
-
L-Type DC BO Motors
300 RPM L-Shape BO Motor
SKU: 103957- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kgcm
SKU: 103957 -
Solenoids and Electromagnets
DC 24V KK-P20/15 3KG Lifting Solenoid Electromagnet
SKU: 867162- Operating Voltage: 24V DC
- Lifting Capacity: 3 KG
- Size (D x L): 20x 15 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 867162 -
Cooling Fans
Sunon 8025 12VDC 1.66W Cooling Fan
SKU: 870206- Operating Voltage: 12VDC
- Power Consumption: 1.44W
- Body and Blade Constructed from Thermoplastic PBT of UL 94V-0
- Single Phase 4 Pole Brushless DC Motor
- Lubricated Sleeve Bearing System.
- Counterclockwise Rotation Direction if Viewed from front of Fan Blade
SKU: 870206 -
Generic Mini Pumps
550 Diaphragm Pump 12V Water Pump for Water Spray Fish Tank Reflux Pump
SKU: 77240- Watering configuration: much the same, additional sprinklers and timers are required
- 12V DC reflux diaphragm pump 550, the price is the price of a pump, without other accessories
- Maximum pressure: 0.48MP.
- Voltage: 12V, current: at least 2A, measured 1A is not able to bring
- Suction: 3 meters or so, preferably 2 meters (no problem if the vertical height is 1.5 meters).
- Head: 4-5 meters (head is not shot)
- Highest temperature resistance 55°
- Flow rate: 3.5L/min
SKU: 77240 -
-
Stepper Motor Drivers
ULN2003A Driver Module Stepper Motor Driver Board
SKU: 312977- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
SKU: 312977 -
Stepper Motor Drivers
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
SKU: 18979- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: 18979 -
Cytron Motor Drivers
MD13S 13Amp DC Motor Driver – GROVE Compatible
SKU: 24027-
Support motor voltage ranges from 6V to 30V
-
Maximum current up to 13A continuous and 30A peak (10 seconds).
-
GROVE compatible
-
3.3V and 5V logic level input.
-
SMD compatible
- Peak Current (A): 30 (10 seconds)
- Continuous Current (A): 1
- No. of Channels: 1
SKU: 24027 -
-
-
Cooling Fans
Sunon 4010 5VDC 0.83W Cooling Fan
SKU: 870202- Operating Voltage: 5VDC
- Power Consumption: 0.83W
- Body and Blade Constructed from Thermoplastic PBT of UL 94V-0
- Single Phase 4 Pole Brushless DC Motor
- Precise Vapo Bearing
- Counterclockwise Rotation Direction if Viewed from front of Fan Blade
SKU: 870202 -
-
-
-
-
-
-
-
-
L-Type DC BO Motors
100 RPM BO Motor – L Shape
SKU: 103841- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 1 Kgcm
SKU: 103841 -
Stepper Motor Drivers
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
SKU: 49111- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency:Â 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
SKU: 49111 -
-
-
Cytron Motor Drivers
Cytron 30Amp DC Motor Driver (Peak 80Amp) MD30C R2
SKU: 2774- Bi-directional control of 1 brushed DC motor.
- Motor Voltage: 5V – 30V.
- Maximum Current: 80A peak (1 second), 30A continuously.
- Reverse polarity protection.
- 3.3V and 5V logic level input.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: 2774 -
-
-
N20 Metal Gear Motors
N20-12V-60 RPM Micro Metal Gear-box DC Motor
SKU: 75037- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 75037 -
Stepper Motor Drivers
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
Stepper Motor DriversMACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
SKU: 18988- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
SKU: 18988 -
Stepper Motor Drivers
TMC2208 Stepper Motor Driver Module
SKU: 699623- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: 699623 -
Orange 12V OG 555 DC Gear Motor
Orange OG555 High Torque DC Motor 12V 100RPM 173.6N-cm Encoder Compatible
Orange 12V OG 555 DC Gear MotorOrange OG555 High Torque DC Motor 12V 100RPM 173.6N-cm Encoder Compatible
SKU: 764983- Voltage (DC):12V
- Rated RPM (at 12V):100
- Gear Reduction: 90K
- Rated Torque (N-cm): 173.6
- Full Load Current (A):4.134
- Motor Body Lenth (mm): 94
- Back shaft for Encoder Available
SKU: 764983 -
-
Generic Mini Pumps
370 Diaphragm 3-5V Self-Priming Small Micro Vacuum Pump
SKU: 77661- Suitable for voltage Range: DC 3-5V
- Weight: 60g
- Pump head inlet, outlet diameter: 3.95mm,
- Can be used with 3 x 5mm silicone tube
- Brand new and high quality.
- Small size but strong;
- Low consumption and high efficiency.
SKU: 77661
