Motors | Drivers | Pumps | Actuators
Showing 289–336 of 1625 results
-
-
-
N20 Metal Gear Motors
N20-6V-60 RPM Micro Metal Gear-box DC Motor
SKU: 75027- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 75027 -
Servo Motor Drivers
16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685
SKU: 31364- Operating voltage: 2.3V to 5.5V
- 5.5V tolerant inputs
- Can operate at minus 40 degrees Celsius to 85 degrees Celsius
- Software reset feature (SWRST Call) allows the device via I2C bus reset
- 25MHz internal oscillator requires no external components
- The maximum allowable 50MHz external clock input
SKU: 31364 -
Futaba servo cable
SafeConnect Twisted 15CM 22AWG Servo Lead Extension (Futaba) Cable with Self-locking Hook
Futaba servo cableSafeConnect Twisted 15CM 22AWG Servo Lead Extension (Futaba) Cable with Self-locking Hook
SKU: 1073235- High-Quality cable
- One male and one female connector.
- Twisted 15 cm Servo Lead Extention (Futaba)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
SKU: 1073235 -
Stepper Motors
42HS40-1504 NEMA17 4.2 Kg-cm Stepper Motor – D Type Shaft
SKU: 1645126- Model: 42HS40-1504 NEMA17 / 17HS4401
- Stable structure, no jamming
- Stable speed and low noise
- Step Angle(degrees): 1.8°±0.09°
- Phase Inductance: 3.7*(1±20%)mH/Phase
- Positioning Torque: 15 mN.m REF.
- Maximum starting rate:≥1500 PPS
- Insulation resistance:≥100 MΩ (DC 500V)
- Cable length: 1meter
SKU: 1645126 -
N20 Metal Gear Motors
N20-6V-400 Rpm Micro Metal Gear Motor
SKU: 75813- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 75813 -
Orange 12V Square Gear Box Motor
Orange MG555 12V 150RPM Square Gearbox DC motor For DIY Project Encoder Compatible
Orange 12V Square Gear Box MotorOrange MG555 12V 150RPM Square Gearbox DC motor For DIY Project Encoder Compatible
SKU: 542618- Rated current (mA): ≤1500.
- Rated power (W): 10.810.
- Rated Torque (N-cm): 73.4
- Rated speed: 140 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 6000.
- Back shaft for Encoder Available
SKU: 542618 -
Mini Pumps and Accessories, Generic Mini Pumps
5V Noiseless Mini Submersible Pump with USB input Plug
Mini Pumps and Accessories, Generic Mini Pumps5V Noiseless Mini Submersible Pump with USB input Plug
SKU: 815811- Simple Plug and Play operation.
- USB input Plug
- It Can operate on any 5V DC power supply like Power bank
- 1 Meter cable with DC jack provides the convenience to connect and disconnect project easily
- Can pump 16 litres per minute
SKU: 815811 -
Stepper Motor Drivers
L9110 L9110S DC Stepper Motor Driver Board HBridge
SKU: 699567- Â Power supply voltage: DC2.5-12V
- Â Each channel has 800mA continuous current output
- Â Low saturation pressure drop
- Â TTL/CMOS output level compatible can be connected directly to the CPU
- Â Control and drive integrated into IC
- Â Have pin high-pressure protection function
SKU: 699567 -
-
N20 Metal Gear Motors
N20-3V-500 RPM Micro Metal Gear-box DC Motor
SKU: 475607- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475607 -
-
Orange 12V Rectangular Gearbox Motor
Orange TT555 12V 30RPM Rectangular gearbox DC motor for DIY Project Encoder Compatible
Orange 12V Rectangular Gearbox MotorOrange TT555 12V 30RPM Rectangular gearbox DC motor for DIY Project Encoder Compatible
SKU: 542697- Rated current (mA): ≤2000.
- Rated power (W): 5.624.
- Rated Torque (N-m): 1.983
- Rated speed: 27 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 4500.
- Back shaft for Encoder Available
SKU: 542697 -
-
Orange 12V Square Gear Box Motor
Orange MG555 12V 60RPM Square Gearbox DC motor For DIY Project Encoder Compatible
Orange 12V Square Gear Box MotorOrange MG555 12V 60RPM Square Gearbox DC motor For DIY Project Encoder Compatible
SKU: 542607- Rated current (mA): ≤2500.
- Rated power (W): 6.077.
- Rated Torque (N-cm): 104.4
- Rated speed: 55 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 6000.
- Back shaft for Encoder Available
SKU: 542607 -
Solenoids and Electromagnets
1240 12V DC 0.6A 7.5W Solenoid Door Lock
SKU: 312517- Holding force: 0.25kg
- Energized forms: intermittent
- Unlocking time: 1S
- Dimensions: 54 x 42 x 28 mm (LxWxH)
- Rustproof, durable, safe, and convenient to use.
- Suction tightly stucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
SKU: 312517 -
-
Solenoids and Electromagnets
DC 24V P40/25 35KG Lifting Solenoid Electromagnet
SKU: 890211- Operating Voltage: 24V DC
- Lifting Capacity: 35KG
- Size (D x L): 40 x 25 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 890211 -
JR Servo cable
SafeConnect Flat 15CM 22AWG Servo Lead Extension (JR) Cable with Hook – 1PCS
SKU: 82338- JR male plug and JR Female plug, compatible each other
- Servo extension cable, 3 pin female to male connector
- For RC Car, plane and helicopter servo connection or receiver connection.
- Wire Length: 150mm
- Color: As the pictures shown.
SKU: 82338 -
-
-
Linear Actuators
Linear Actuator Stroke Length 200MM,7mm/S,1500N,12V
SKU: 618168- Permanent magnet DC motor drive: Voltage 12VDC
- Self Locking Force: 1500N
- The current required to push 150KG is 1.5~2A
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: A service life of more than 50000 times.
SKU: 618168 -
-
-
N20 Metal Gear Motors
N20-12V-400 Rpm Micro Metal Gear Motor
SKU: 75787- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 75787 -
N20 Metal Gear Motors
N20-12V-200 RPM Micro Metal Gear Motor
SKU: 75762- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 75762 -
-
Orange 12V Square Gear Box Motor
Orange MG555 12V 30RPM Square Gearbox DC motor For DIY Project Encoder Compatible
Orange 12V Square Gear Box MotorOrange MG555 12V 30RPM Square Gearbox DC motor For DIY Project Encoder Compatible
SKU: 542606- Rated current (mA): ≤2000.
- Rated power (W): 7.062.
- Rated Torque (N-cm): 232.7
- Rated speed: 27 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 6000.
- Back shaft for Encoder Available
SKU: 542606 -
-
Orange 12V Rectangular Gearbox Motor
Orange TT555 12V 4RPM Rectangular gearbox DC motor for DIY Project Encoder Compatible
Orange 12V Rectangular Gearbox MotorOrange TT555 12V 4RPM Rectangular gearbox DC motor for DIY Project Encoder Compatible
SKU: 521210- Rated current (mA): ≤700.
- Rated power (W): 3.721.
- Rated Torque (N-cm): 846.2
- Rated speed: 4 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 4500.
- Back shaft for Encoder Available
SKU: 521210 -
Cooling Fans
Sunon 6010 12VDC 1.42W Cooling Fan
SKU: 870205- Operating Voltage: 12VDC
- Power Consumption: 1.42 W
- Body and Blade Constructed from Thermoplastic PBT of UL 94V-0
- Single Phase 4 Pole Brushless DC Motor
- Precise Vapo Bearing
- Counterclockwise Rotation Direction if Viewed from front of Fan Blade
SKU: 870205 -