Motors | Drivers | Pumps | Actuators
Showing 385–432 of 1626 results
-
-
Brushed / Brushless DC motor Driver
12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch with Case
Brushed / Brushless DC motor Driver12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch with Case
SKU: 1307994- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
SKU: 1307994 -
-
N20 Metal Gear Motors
N20-3V-300 RPM Micro Metal Gear-box DC Motor
SKU: 475324- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475324 -
Pull and Push Rod for Servo
D1.2x840mm Z type Push/Pull Steel Rod for RC Aircraft Aero-Modelling-2Pcs
Pull and Push Rod for ServoD1.2x840mm Z type Push/Pull Steel Rod for RC Aircraft Aero-Modelling-2Pcs
SKU: 453184Push/Pull Steel Rod Wire is steel wire with spring material used to connect RC plane’s Direction flaps to servomotor horn. Z Type Push-Pull Rod, a necessary part for model aeroplane control horn quick adjusting.
SKU: 453184 -
-
Cytron Motor Drivers
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
SKU: 56432- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
SKU: 56432 -
Cytron Motor Drivers
Cytron Maker Reflect: Simplifying IR Reflectance Sensor for Beginner
SKU: 718385- Operating Voltage: 3.3V and 5V Compatible
- Sensing Distance (Height): 1mm to 40mm (Vcc = 5V, Blackline on a white surface)
- Features a tiny reflectance sensor
- This sensor is used in line following robot
- Fits easily in the tightest space
SKU: 718385 -
Stepper Motor Drivers
3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module
SKU: 815797This 3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module is a pulse generating module, which used as a signal for stepper drivers. To control the stepper motor,
SKU: 815797 -
-
-
Solenoids and Electromagnets
DC 12V 1A 10mm Stroke 15N Force Open Frame Solenoid Door Lock
SKU: 28652- Iron Body Material
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Designed with the open frame type and mount board, high power.
- Easy to install for the electric door lock or other automatic door lock systems with the mounting board
- Applicable for being installed in the escape door or fire door electronic controlled system.
SKU: 28652 -
-
-
-
-
-
Cooling Fans
DC5V 0.25A 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
Cooling FansDC5V 0.25A 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187556- 45mm Radial Cooling fan.
- 5V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187556 -
Cooling Fans
Sunon 8025 12VDC 1.44W Cooling Fan
SKU: 870207- Operating Voltage: 12VDC
- Power Consumption: 1.44W
- Body and Blade Constructed from Thermoplastic PBT of UL 94V-0
- Single Phase 4 Pole Brushless DC Motor
- Precise Vapo Bearing
- Counterclockwise Rotation Direction if Viewed from the front of Fan Blade
SKU: 870207 -
-
Orange 12V Square Gear Box Motor
Orange MG555 12V 100RPM Square Gearbox DC motor For DIY Project Encoder Compatible
Orange 12V Square Gear Box MotorOrange MG555 12V 100RPM Square Gearbox DC motor For DIY Project Encoder Compatible
SKU: 542617- Rated current (mA): ≤3600.
- Rated power (W): 7.836.
- Rated Torque (N-cm): 77.4
- Rated speed: 90 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 6000.
- Back shaft for Encoder Available
- Gear Ratio: 55K.
SKU: 542617 -
Plastic Gear Box Motor
DC Motor 45RPM 12Volts
SKU: 356386- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 30 RPM at 12V, the motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 4.2
- Stall Torque(kg-cm): 16
SKU: 356386 -
-
-
-
-
Cytron Motor Drivers
Cytron SmartDriveDuo-10 MDDS10 DC MOTOR DRIVER
SKU: 4565-
Single power operation
-
Dual Channels means it can drive two brush motor independently, or mixed.
- Support Signed magnitude and Locked Anti-phase in PWM mode.
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
-
Power, Error indicator, RUN status (Left and Right) LEDs
-
On board reset button to restart the MCU after changing operation mode.
-
Operating modes: RC (RC servo signal), Analog, PWM, simplified and packetized UART.
SKU: 4565 -
-