IoT Development Boards
Showing 97–144 of 253 results
-
IoT Development Boards
AC220V ESP8266 1 Channel WIFI Relay Module ESP-12S Wifi Development Board
SKU: 1165418Â 1.Model: LC-Relay-ESP12-1R-MVÂ 2.Work Voltage:AC90-250V/DC7-12V/USB5VÂ 3.WIFI IC: ESP8266Â 4.Communication Protocol:UARTÂ 5.Load voltatge:AC 250V or DC 30V(Max)Â 6.Load current:10A(Max)SKU: 1165418 -
IoT Development Boards
JTAGulator with JTAG Exploitation Learning kit
SKU: 1051958- 24 I/O channels with input protection circuitry
- Adjustable target voltage: 1.2 V to 3.3 V
- Supported target interfaces (as of firmware v1.1): JTAG/IEEE 1149.1, UART/asynchronous serial
- USB interface for direct connection to the host computer
SKU: 1051958 -
-
IoT Development Boards
Espressif ESP32-PICO-DevKitM-2 Development board
SKU: 1696731- On Board chip: ESP32 system on a chip (ESP32 SoC)
- LDO: V-to-3.3V Low dropout voltage regulator (LDO).
- USB-to-UART bridge: CP2102N, single-chip USB-UART bridge that offers up to 3 Mbps transfers rates
- Connectivity Technology: Bluetooth ,Wifi
SKU: 1696731 -
-
-
IoT Development Boards
WeAct Studio ESP32H2-N4-A Development Board Support Thread Zigbee Bluetooth5 Bluetooth Mesh Replacement ESP32-H2-DevKitM-1
IoT Development BoardsWeAct Studio ESP32H2-N4-A Development Board Support Thread Zigbee Bluetooth5 Bluetooth Mesh Replacement ESP32-H2-DevKitM-1
SKU: R110788- Processor: 32-bit RISC-V single-core @96MHz
- Connectivity: IEEE 802.15.4 supporting Thread and Zigbee, Bluetooth Low Energy supporting Bluetooth 5 and Bluetooth mesh
- Memory: 320 KB SRAM, 128 KB ROM, 4 KB LP Memory, 2/4 MB Flash
- GPIOs: 19 GPIOs
SKU: R110788 -
IoT Development Boards
Espressif ESP32-PICO-KIT Development board
SKU: 1696732- On- Board Chip: ESP32
- Microcontroller Unit (MCU): Xtensa LX6 CPU architecture
- LDO: 5V-to-3.3V Low dropout voltage regulator (LDO)
- USB-to-UART bridge: CP2102N, single-chip USB-to-UART bridge that offers up to 3 Mbps transfers rates
SKU: 1696732 -
-
-
IoT Development Boards
Matrix Voice IoT Development Platform with ESP32 Wireless Module
SKU: 712428- Xilinx Spartan 6 XC6SLX9 FPGA
- 7 x MEMSMP34DB02 audio sensor digital microphone array
- 18 x RGBW LEDs
- 64MByte 132MHZ SDRAM
- 64Mbit Flash Memory
- Wifi 2.4Ghz 802.11bgn – BT 4.0 LE
- Tensilica Xtensa dual-core 32-bit LX6 microcontroller
SKU: 712428 -
IoT Development Boards
WeAct Studio ESP32-S3-DevKitC-1 ESP32-S3 WiFi Bluetooth-compatible BLE 5.0 Mesh Development Board ESP32 Wireless Module Micropython
IoT Development BoardsWeAct Studio ESP32-S3-DevKitC-1 ESP32-S3 WiFi Bluetooth-compatible BLE 5.0 Mesh Development Board ESP32 Wireless Module Micropython
SKU: R110796- 802.11b/g/n, 1T1R mode, data rate up to 150Mbps.
- Bluetooth 5.0, Bluetooth-compatible mesh, supported data rates: 125Kbps, 500Kbps, 1Mbps, 2Mbps.
- Processor: Xtensa-R 32-bit LX7 dual-core processor, clock frequency support up to 240MHz.
- Memory: 512KB SRAM, 384KB ROM, 16KB RTC SRAM
SKU: R110796 -
IoT Development Boards
WeAct Studio STM32G030F6P6 Core Demo Board
SKU: R110770- ARM Cortex-M0+ CPU running at up to 64 MHz.
Up to 64 Kbytes Flash memory and 8 Kbytes SRAM. - Supports crystal oscillators and internal RC oscillators.
- Multiple communication interfaces (I2C, USART, SPI) and a 12-bit ADC.
- Offers low-power modes and VBAT supply for RTC.
- Includes serial wire debug (SWD) for efficient development and debugging.
SKU: R110770 - ARM Cortex-M0+ CPU running at up to 64 MHz.
-
IoT Development Boards
WeAct Studio ESP32-C6-A-N4 Development Board ESP32C6 Minimum System Board ESP32 Core RISC-V Espressif IoT WiFi6 Bluetooth Zigbee
IoT Development BoardsWeAct Studio ESP32-C6-A-N4 Development Board ESP32C6 Minimum System Board ESP32 Core RISC-V Espressif IoT WiFi6 Bluetooth Zigbee
SKU: R110789- Name: WeAct ESP32-C6 Development Board
- Module: ESP32-C6-WROOM-1
- Clock: 160MHz
- SRAM: 512KB (21KB for cache)
- Flash: 4MB (expandable up to 16MB)
- Size: 25.5mm x 51.8mm
SKU: R110789 -
IoT Development Boards
WeAct Studio CH32V203C8T6 RISC-V Low Power Core Demo Board
SKU: R110775- Processor: Qingke V4B
- Memory: 20KB SRAM, 64KB Flash
- Power Supply: 3.3V
- DMA Controllers: 18-channel general DMA controllers
- Analog Features: 10-channel 12-bit ADC, 10-channel TouchKey, 2 amplifiers
- Interfaces: USB2.0 host/device, UARTs (4), CAN, IIC (2), SPI (2)
SKU: R110775 -
-
-
-
-
-
-
IoT Development Boards
M5Stack AtomU ESP32 Development Kit with USB-A
SKU: 1223440- product: Development Kit with USB-A
- Model: ESP32
- ESP32-PICO-D4:Â 240MHz dual core, 600 DMIPS, 520KB SRAM, 2.4G Wi-Fi
- Support PDM clock frequency 1.0 ~ 3.25MHz
- Standby working current 40.4mA
- Product size:Â 52 x 20 x 10mm
SKU: 1223440 -
IoT Development Boards
WeAct Studio STM32G431CBU6 Core Demo Board
SKU: R110786- Arm® Cortex®-M4 CPU up to 170 MHz with FPU
- Up to 128 Kbytes Flash memory
- 32 Kbytes SRAM
- Memory Protection Unit (MPU)
- Code Readout Protection (PCROP)
- Operating voltage range: 1.71 V to 3.6 V
- Low-power modes: sleep, stop, standby, shutdown
SKU: R110786 -
-
IoT Development Boards
5V Wireless DMX512 2.4G Receiver Transmitter PCB Module Board for Stage Lighting
IoT Development Boards5V Wireless DMX512 2.4G Receiver Transmitter PCB Module Board for Stage Lighting
SKU: 1794196- Model Number: Wireless DMX512 PCB Module
- Input voltage: 5VDC
- Work frequency section: 2.4GHz ISM band, 126 channels frequency section
- Max transmitting power rate: 20dBm
- Receiver sensitive: -94dBm
SKU: 1794196 -
-
IoT Development Boards
NANO32 ESP32 IoT Development Board
SKU: 24473-
ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: 24473 -
-
IoT Development Boards
WeAct Studio S3 WIFI Bluetooth Mini IOT Board ESP32-S3FH4R2 4MB FLASH 2MB PSRAM Compatible with MicroPython
IoT Development BoardsWeAct Studio S3 WIFI Bluetooth Mini IOT Board ESP32-S3FH4R2 4MB FLASH 2MB PSRAM Compatible with MicroPython
SKU: R110784- Chip: ESP32-S3FH4R2
- Wi-Fi: 2.4 GHz
- Bluetooth: Bluetooth LE
- USB Interface: Type-C
- Digital Pins: 27, with interrupt, PWM, I2C, and one-wire support
SKU: R110784 -
-
IoT Development Boards
Sipeed MAIX-I module w/o WiFi ( 1st RISC-V 64 AI Module, K210 inside )
SKU: 755023- Up to 8 channels of audio input data, ie 4 stereo channels
- Simultaneous scanning pre-processing and beamforming for sound sources in up to 16 directions
- 16-bit wide internal audio signal processing
- Dual-core RISC-V 64bit IMAFDC, on-chip huge 8MB high-speed SRAM (not for XMR :D), 400MHz frequency
- Up to 192kHz sample rate
SKU: 755023 -
IoT Development Boards
Espressif ESP32-S3-Korvo-2 Development board
SKU: 1696741- On Board Chip: The ESP32-S3-WROOM-1 is a powerful, generic Wi-Fi + Bluetooth LE MCU module that is built around the ESP32-S3 series of SoCs
- Left Microphone: Onboard microphone connected to ADC.
- Audio ADC Chip: ES7210 is a high-performance, low-power 4-channel audio analog-to-digital converter for microphone
- Audio Codec Chip: The audio codec chip, ES8311, is a low-power mono audio codec
- Audio PA Chip: NS4150 is an EMI, 3 W mono Class D audio power amplifier
SKU: 1696741 -
-
IoT Development Boards
WeAct Studio STM32C011F6P6 Core Demo Board
SKU: R110773- Arm® Cortex®-M0+ CPU up to 48 MHz
- Up to 32 Kbytes flash memory with protection
- 6 Kbytes SRAM with hardware parity check
- 12-bit ADC with up to 15 channels, 2.5 MSps
- Wide communication support: I2C, SPI/I2S, USARTs
- Low-power operation: -40°C to 125°C, 2.0 V to 3.6 V, low-power modes
SKU: R110773