IoT and Wireless
Showing 865–912 of 1007 results
-
IoT Development Boards
Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT
SKU: R111303- Processor: ESP32-S3 Dual Core 240MHz Tensilica processor
- Memory: 4MB Flash, 512KB SRAM, 2MB PSRAM
- Connectivity: WiFi, Bluetooth Low Energy (BLE)
- USB: Native USB support
- GPIO Pins: 13 GPIO pins (11 on breakout pads, 2 on QT connector)
SKU: R111303 -
IoT Development Boards
WeAct Studio ESP32 Development Board TYPE-C CH340K WiFi+Bluetooth Dual Core ESP32-DOWD-V3
IoT Development BoardsWeAct Studio ESP32 Development Board TYPE-C CH340K WiFi+Bluetooth Dual Core ESP32-DOWD-V3
SKU: R110795- Chip: ESP32
- Wireless Connectivity: 2.4GHz Wi-Fi, Bluetooth dual-mode
- Manufacturing Process: TSMC 40nm low-power process
- Application Compatibility: Versatile, suitable for various application scenarios.
SKU: R110795 -
IoT Development Boards
WeAct Studio BLE 5.0 Mesh Development Board Bluetooth-compatible WiFi ESP32S3-B-N16R8 Wireless Module Micropython
IoT Development BoardsWeAct Studio BLE 5.0 Mesh Development Board Bluetooth-compatible WiFi ESP32S3-B-N16R8 Wireless Module Micropython
SKU: R110787- Processor: 32-bit Xtensa® dual-core @240MHz
- Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz + BLE 5 Mesh
- Memory: 512 KB SRAM (16 KB SRAM in RTC), 384 KB ROM
- GPIOs: 45 GPIOs
SKU: R110787 -
IoT Development Boards
Waveshare ESP32-S3 A7670E LTE 4G Development Board
SKU: R101192- Frequency Band: LTE-FDD: B1, B3, B5, B7, B8, B20
- Data Transmission: ≤5Mbps(UL), ≤10Mbps(DL)
- Power supply method: USB port, 18650 lithium battery holder (18650 battery is NOT included), pin header
- Power input: 5V (USB port / 5V pin header)
3.7~4.2V (18650 lithium battery holder / VBAT pin header) - Logic Level: 3.3V
SKU: R101192 -
IoT Development Boards
Waveshare R7FA4 PLUS B Development Board, Compatible with Arduino UNO R4 WiFi
SKU: R101198- Renesas RA4M1 MCU + Espressif ESP32-S3.
- 12×8 LED matrix, Qwiic connectors, VRTC.
- Works with Arduino UNO R4 Minima.
- 256 kB Flash, 32 kB RAM, 12-bit DAC, CAN bus.
- USB-C or VIN (6V<=VIN<=21V) input options.
SKU: R101198 -
-
-
IoT Development Boards
NanoPi M1 Plus Bare Board
SKU: 1873833- Model: NanoPi M1 Plus Bare Board.
- Uses the Allwinner H3 Soc.
- GPIO pins are compatible with those of a Raspberry Pi.
- Power Supply: DC 5V/2A
- OS/Software: u-boot, Debian, Ubuntu-MATE, Ubuntu-Core
- CPU: Allwinner H3, Quad-core [email protected]
- GPU: Mali400MP2@600MHz，Supports OpenGL ES2.0
- DDR3 RAM: 1GB
SKU: 1873833 -
IoT Development Boards
Ai-Thinker AiPi-UNO-ET485 Arduino development board base on Ai-M61–32S module
SKU: 1768850- Ensuring high performance and reliability for Arduino development projects.
- Providing compatibility with Arduino IDE and libraries for easy programming and development.
- Lightweight design enhances portability.
- Wide range of applications including robotics, automation, IoT.
- Features a tri-colored LED indicator for visual feedback and status monitoring.
SKU: 1768850 -
Arducam Cameras and Accessories
Arducam 2MP AR0230 WDR USB Camera Module with Metal Case and M12 Lens for Raspberry Pi, Windows, Linux, Mac OS, Android
Arducam Cameras and AccessoriesArducam 2MP AR0230 WDR USB Camera Module with Metal Case and M12 Lens for Raspberry Pi, Windows, Linux, Mac OS, Android
SKU: 1718469- Sensor: AR0230
- Resolution: 2MP
- Shutter Type: Rolling shutter
- Optical Size: 1/2.7″
- Output Format: MJPG/YUY2/H.264
- Pixel Size: 3.0 µm x 3.0 µm
- Sensor Active Area: 1920(H)x1080(V)
SKU: 1718469 -
-
-
Other ESP WIFI Modules
BIGTEETECH BTT ESP-01S WIFI Module ESP8266 for SKR Octopus Control Board
SKU: 1604092- Provide reliable and secure connection to Wi-Fi networks
- Low power consumption
- Supports multiple security protocols
- An ESP8266 chip that supports 802.11 b/g/n standards and can reach speeds of up to 150 Mbps
SKU: 1604092 -
-
IoT WIFI Smart Switches
Sonoff Smart Stackable Power Meter – (SPM Main Unit Only)
SKU: 1487148- One SPM-Main can be connected 32 SPM-4Relays.
- You can monitor the power consumption by checking the eWeLink app on your mobile
- Each channel can support a maximum current of 20A
- SPM-4Relays via RS-485, which enables long-distance multi-terminal and stable data transmission.
- Overload protection can protect your devices from being burned out.
SKU: 1487148 -
IoT Cameras
EMBEST Daughter Card, Digital Camera Module, 5MP USB Camera, 2592×1944 Resolution, Automatic Focus
IoT CamerasEMBEST Daughter Card, Digital Camera Module, 5MP USB Camera, 2592×1944 Resolution, Automatic Focus
SKU: 1470042- Product: EMBEST Daughter Card, Digital Camera Module, 5MP USB Camera, 2592×1944 Resolution, Automatic Focus
- Object distance: 30cm
- Resolution: 600LW/PH (Center)
- Interface: USB 2.0
SKU: 1470042 -
-
-
-
GPRS and GSM Modules
Ai-Thinker EC-01G NB-IOT Module
SKU: 1225295- Processor: Cortex-M3，support MPU
- Storage: 4MB NOR Flash on chip
- System: Flexible Configuration Support 1.8/2.8/3.3V IO
- Development board Model: EC-01G
- Adaptive pattern combination: EC-01、EC-01G
- Packaging: DIP-14（2.54Spacing standard row needle)
- Size: 19.2*18.8*2.8(±0.2)MM
SKU: 1225295 -
LORA Module
SenseCAP M1 LoRaWAN Indoor Gateway(4G RAM+SX1302) – EU868
SKU: 1181678- Input Voltage DC 5V – 3A
- Processor Raspberry Pi 4 (Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz)
- RAM: 4GB
- Storage: 64GB MicroSD Card
- Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless
- Bluetooth 5.0, BLE
- LoRaWAN Supports Class A, C
SKU: 1181678 -
-
-
IoT Development Boards
Waveshare BG95 EVB Development Board Designed For QuecPython, Low Power Consumption, Supports LTE / EGPRS Communication And GNSS Positioning
IoT Development BoardsWaveshare BG95 EVB Development Board Designed For QuecPython, Low Power Consumption, Supports LTE / EGPRS Communication And GNSS Positioning
SKU: R123345- Modes: LTE Cat M1, LTE Cat NB2, EGPRS
- 3GPP: Release 14 compliant
- Data Rate: 588 kbps downlink, 1119 kbps uplink (LTE Cat M1)
- Processor: Type: ARM Cortex A7
- Operating System: ThreadX
SKU: R123345 -
xBee Zigbee modules
Ebyte E180-ZG120B 1.3km EFR32chip GPIO 19dBm SMD,11.5x18mm ZigBee Modules ROHS
SKU: R112969- Model: E180-ZG120B
- Antenna Type: IPEX
- Transmission Distance: 1.3km
- Operating Voltage: 3.3V
- Core IC: EFR32
- Support Interface: GPIO
- Receive Current: 10mA
- Output Power: 19dBm
- Operating Temperature: -40℃~+85℃
- Send Current: 135mA
SKU: R112969 -
LORA Module
Ebyte E22-400T33S-V2 SMD, 25×40.5mm LoRa Modules ROHS
SKU: R112965- Operating voltage (V): 3.3 to 5.5V
- Operating temperature (C): -40 to 85
- Cache capacity: 1000 Byte
- Sleep current (uA): 2
- Communication interface: UART serial port
- Modulation method: LoRa
- Launch length: 240 Byte
- Reference distance: 16km
SKU: R112965 -
xBee Zigbee modules
Ebyte E18-2G4Z27SI 2.5km CC2530chip 27dBm -98dBm SMD,22.5x16mm ZigBee Modules ROHS
xBee Zigbee modulesEbyte E18-2G4Z27SI 2.5km CC2530chip 27dBm -98dBm SMD,22.5x16mm ZigBee Modules ROHS
SKU: R112968- Model: E18-2G4Z27SI
- Antenna Type: IPEX
- Transmission Distance: 2.5km
- Operating Voltage: 3.3V
- Core IC: CC2530
- Support Interface: ADC;PWM;GPIO
- Send Current: 182.5mA
- Output Power: 27dBm
- Receive Current: 33mA
- Operating Temperature: -40℃~+85℃
- Sensitivity: -98dBm
SKU: R112968 -
Bluetooth and NRF Modules
Ebyte E72-2G4M02S2B 97dBm CC2640chip 2dBm UART SMD,14x23mm Bluetooth Modules ROHS
Bluetooth and NRF ModulesEbyte E72-2G4M02S2B 97dBm CC2640chip 2dBm UART SMD,14x23mm Bluetooth Modules ROHS
SKU: R112963- Model: E72-2G4M02S2B
- Operating Voltage: 3.3V
- Wireless Standard: Bluetooth4.2
- Sensitivity: -97dBm
- Send Current: 11mA
- Output Power (Max): 2dBm
- Core IC: CC2640
- Support Interface: UART
- Operating Temperature: -40℃ to +85℃
- Receive Current: 2mA
SKU: R112963 -
IoT Development Boards
StereoPi v2 Slim
SKU: R123353- Both wireless-equipped and no-wireless versions
- eMMC equipped and no eMMC editions
- 1, 2, 4, and 8 Gb RAM versions
- Width x Length: 100 mm x 40 mm
- Height: 15 mm (slim edition)
- Video Input and Output: Input: Two 15-pin CSI-2 camera connectors
Output: One micro HDMI
SKU: R123353 -
-
LORA Module
Ebyte E220-400M30S SMD, 24×38.5mm LoRa Modules ROHS
SKU: R112966- Operating frequency band (MHz): 410 to 493
- Emission current (mA): 600
- Received current (mA): 12.5
- Sleep current (uA): 1
- Maximum transmission power (dBm): 29 to 31
- GFSK (bps): 0.6k to 300k
- LoRa(bps); 1.76k to 62.5k
- Measured distance: 10km
- FIFO: 256Byte
SKU: R112966 -
IoT Development Boards
Waveshare ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, USB Port Adapter Board Optional
IoT Development BoardsWaveshare ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, USB Port Adapter Board Optional
SKU: R122637- Processor: Xtensa 32-bit LX7 dual-core processor
- SRAM: 512KB
- ROM: 384KB
- PSRAM: onboard 2MB
- Flash memory: 4MB
SKU: R122637
