Flight Controller & Accessories
Showing 49–96 of 180 results
-
Flight Controller & Accessories
Holybro Original Pixhawk PX4 Flight Controller (without GPS)
SKU: 311064- Main FMU Processor: STM32F76
- 32 bit ARM® Cortex® M7, 216 MHz Processor running NuttX RTOS,
- More computing power and 2X the RAM than previous versions)
- Abundant connectivity options for additional peripherals (UART, I2C, CAN)
- Redundant power supply inputs and automatic failover
- External safety button for easy motor activation
- New sensors with higher temperature stability
- Multicolor LED indicator
- Integrated vibrations isolation
- High-power, multi-tone piezo audio indicator
- microSD card for long-time high-rate logging
SKU: 311064 -
Flight Controller & Accessories
Mini APM3.1 Flight Controller with Power Module for Multicopter FPV
SKU: 45511- 8 Channel PWM input
- Â 8 motor outputs
- Â 12-way Auxiliary input and output
- Â Supports GPS, compass, telemetry and power module
- Â Onboard connections JST-SH with 1.0mm pitch
- Â Compatible with official Firmware and Groundstation.
SKU: 45511 -
Flight Controller & Accessories
F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC
SKU: 1326006- Product: Flight Controller
- SPI Gyro IC268G
- On-Board OSD (controllered by Betaflight, FC over SPI bus)
- MicroSD Blackbox
- Baro (BMP280)( default is closed,need to open in configuration,if not know how to open,contact with us)
SKU: 1326006 -
Flight Controller & Accessories
F4 V3S Plus Flight Control OSD 2-6S Two way 3A BEC 9V Pad Design For Betaflight RC FPV Racing Drone Quadcopter Frame
Flight Controller & AccessoriesF4 V3S Plus Flight Control OSD 2-6S Two way 3A BEC 9V Pad Design For Betaflight RC FPV Racing Drone Quadcopter Frame
SKU: 1203885- Item name: F4 V3 PLUS Flight Controller
- Firmware: Omnibus ~ f4
- Board Dimensions: 36x36mm
- Montagegaten: 30.5×30.5mm
- STM32 F405 MCU
- Dshot protocol
SKU: 1203885 -
Flight Controller & Accessories
Mamba F4 pro V2 flight controller
SKU: 1176663- Model: Mamba F4 pro V2
- Input voltage: 2 – 6s LiPo support
- Gyroscope: MPU6000 (reserved external gyroscope interface)
- Firmware: BetaFlihgt 3.2.0 OMNIBUSF4SD
- Support Receiver: PPM, SBUS, IBUS, DSM2/DSMX Receiver (UART1)
- Integrated with OSD, support BF Ground Station adjust OSD
- Adjust the PID by OSD by remote control
SKU: 1176663 -
-
Flight Controller & Accessories
Holybro Pixhawk 6X Pro (FC Model Only)
SKU: R133340- FMU Processor: STM32H753
32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM - IO Processor: STM32F103
32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM - On-board sensors:
Accel/Gyro: ADIS16470
±40g, Vibration Isolated, Industrial IMU
Accel/Gyro: IIM-42652
±16g, Vibration Isolated, Industrial IMU
Accel/Gyro: ICM-45686 with BalancedGyroâ„¢ Technology
±32g, Hard Mounted
SKU: R133340 - FMU Processor: STM32H753
-
Flight Controller & Accessories
Holybro Power Distribution Board (PDB) (With XT30 Pre-soldered)
SKU: R133339- Rated Current: 60A
- Max Current: 120A (<60 sec)
- Mounting Holes: 45x45mm
- Connector Options:
- Pre-soldered XT60 for Power Module & Battery
- Optional pre-soldered XT30 for ESC & Motor on X500 V2
SKU: R133339 -
-
-
Flight Controller & Accessories
Jumper T Pro V2 Radio Controller ELRS
SKU: R111226- Multi-Protocol Remote Control, Model Jumper T-Pro
- Internal JP4IN1 Multi-Protocol Module
- 1.3″ OLED screen, 128*64 resolution
- Hall sensor gimbals for high precision and durability
- External NANO interface supports ELRS/CRSF/Tracer
- USB-C internal battery charging, supports 2x 18650 batteries
SKU: R111226 -
Flight Controller & Accessories
Jumper T20 V2 2.4GHz Radio Controller ELRS Version
SKU: R101964- MCU: STM32F407ZGT6
- External Module Interface: Reserved (1.25mm-SP)
- Screen: 1.3″ OLED (128*64)
- External Module Power Supply: XT80 (22A output)
- SD Card: Chip-based internal (officially recommended by EdgeTX)
- Gimbal Size: Standard full-size gimbal
- Voltage: 6-8.4V
- Gimbal Sensors: ROC90 / Hall optional
- Battery: 2pcs 21700
- Power Output: Maximum 1W
- Weight: 448g (battery not included)
SKU: R101964 -
Flight Controller & Accessories
Jumper T14 Radio Controller with CNC Gimbals – ELRS
SKU: R101963- Screen Size: 2.42″ (resolution 128×64)
- Display Method: OLED
- Rocker Stick Size: Standard
- Working Voltage: 6-8.4V
- Battery: Requires 2x 21700 Li-ion batteries (not included)
- Size: 185x175x79mm
- Weight: 4719 grams
SKU: R101963 -
Flight Controller & Accessories
Jumper T20 Gemini Radio Controller
SKU: R111229- Compact, full-featured ELRS GEMINI radio
- Omnidirectional Double Folding Antenna
- 90° placement for superior signal coverage
- Excellent airflow for heat dissipation
- Extensive customization options
- Advanced technology and sleek design
SKU: R111229 -
Flight Controller & Accessories
Jumper T14 Radio Controller with Standard Gimbals – ELRS
SKU: R111228- Screen Size: 2.42″ (resolution 128×64)
- Display Method: OLED
- Rocker Stick Size: Standard
- Working Voltage: 6-8.4V
- Battery: Requires 2x 21700 Li-ion batteries (not included)
- Size: 185x175x79mm
- Weight: 4719 grams
SKU: R111228 -
Flight Controller & Accessories
Holybro Pixhawk 6X-RT (Developer Edition) Standard Set
SKU: R110845- High performance dual core i.MXRT1176 Processor with Cortex-M7 @ 1GHz – Cortex-M4 @ 400MHz
- Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
- Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
- MCU: i.MXRT1176
- Cortex-M7 @ 1GHz
- Cortex-M4 @ 400MHz
- 2MB SRAM
- 64MB Octal SPI Flash
SKU: R110845 -
Flight Controller & Accessories
Holybro Pixhawk 6X RPi CM4 Baseboard With PM03D Power module
SKU: R110846- integrated Components: Pixhawk Flight Controller module and Raspberry Pi CM4 companion computer
- Connection Standards: Pixhawk Connector and Autopilot Bus Standard
- Internal Connection: TELEM2
SKU: R110846 -
-
Flight Controller & Accessories
Holybro Digital Air Speed Pivot Tube Only
SKU: R110851- Type: Digital Air Speed Pitot Tube
- Measurement Range: Accurate over a wide range of airspeeds
- Interface: Digital
- Dimensions: Standard size for easy integration
- Weight: 20 g
- Material: High-quality materials for durability and longevity
SKU: R110851 -
Flight Controller & Accessories
Holybro Digital Air Speed Sensor(MS5525DSO) With PT40 Pitot Tube
SKU: R110848- Integrated Digital Pressure Sensor(24-bit ∆Σ ADC)
- Fast Conversion Down to 1 ms
- Low Power, 1 µA (standby < 0.15 µA)
- Supply Voltage: 1.8 to 3.6V
- Pressure Range: 1 to 30 PSI
- I2C and SPI Interface
SKU: R110848 -
Flight Controller & Accessories
Holybro Digital Air Speed Sensor(MS5525DSO) With PT60 Pivot Tube
SKU: R110849- Integrated Digital Pressure Sensor(24-bit ∆Σ ADC)
- Fast Conversion Down to 1 ms
- Low Power, 1 µA (standby < 0.15 µA)
- Supply Voltage: 1.8 to 3.6V
- Pressure Range: 1 to 30 PSI
- I2C and SPI Interface
SKU: R110849 -
-
-
-
Flight Controller & Accessories
SpeedyBee F405 Mini BLS 35A 20×20 Stack
SKU: R100760- MCU STM32F405
- IMU(Gyro) ICM42688P
- USB Port type Type-C
- Barometer Built-in OSD Chip AT7456E chip
- Power Input 3-6S LiPo.
- The flight controller is powered through the G, V wires of the 8pin harness or G, V pads from the bottom side of the flight controller.
SKU: R100760 -
Flight Controller & Accessories
SpeedyBee BLS 35A Mini V2 20×20 4-in-1 ESC
SKU: R100762- Firmware: BLHeli S J-H-40
- Continuous Current: 35A * 4
- Burst Current: 45A(5seconds)
- ESC Protocol: DSHOT300/600
- Power Input: 3-65 LiPo
- Power Output: VBAT(Battery voltage, used to power the flight controller)
SKU: R100762 -
-
Flight Controller & Accessories
 Pixhawk 6C (plastic case)
SKU: R100011- Advanced flight controller with PX4 Autopilot.
- STM32H743 processor up to 480 MHz for efficient processing.
- Redundant IMUs for reliability from Bosch & InvenSense.
- An integrated vibration isolation system ensures accurate readings.
- Suitable for academic, commercial, and research applications.
- Cost-effective design with high performance.
SKU: R100011 -
-
Flight Controller & Accessories
T Motor MINI F45A 6S 4IN1
SKU: 1800267- Mini body strong performance.
- Reliable & High-Quality MOSFET.
- Safeguard electronic components from vibration impact.
- Input Voltage: 3- 65
- ESC Firmware: BLHeli32
- Telemetry: Support
- galvanometer: Support
- Mounting pitch: 20 x 20mm
- Weight: 9.2g
- beta flight galvanometer ratio: 200
SKU: 1800267 -
Flight Controller & Accessories
Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
SKU: 1777637- Model: Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
- Metal-cased MOSFET
- Smooth control and quick response
- Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
SKU: 1777637