Flight Controller & Accessories
Showing 49–96 of 162 results
-
Flight Controller & Accessories
Holybro Kakute H7 V2 Flight Controller
SKU: 1429630- MCU STM32H743 32-bit processor running at 480 MHz
- VTX ON/OFF Pit Switch – Switch can be enabled using USER1 in the Beta flight Mode tab.
- H7 processor @480 MHz
- Bluetooth onboard
- 8 Motors outputs in plugs
- 128 MB flash for logging
- VTX On/Off switch
SKU: 1429630 -
Flight Controller & Accessories
Holybro Kakute H743 Wing Flight Controller with Micro M10 GPS Module
SKU: 1720323- MCU: STM32H743, 480 MHz, 1MB RAM, 2MB Flash
- IMU: ICM-42688P (SPI3)
- Baro: BMP280 (I2C4)
- OSD: AT7456E (SPI2)
- Blackbox: MicroSD card slot on SDMMC2
- 7x Uarts (1,2,3,5,6,7,8) with built-in inversion.
SKU: 1720323 -
Flight Controller & Accessories
Holybro Micro APM flight controller
SKU: 1444799- One of the first open-source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively
- Communication I2C, analog I/O.
- Module Telemetry, GPS, Power module
- Support 8-channel input
SKU: 1444799 -
Flight Controller & Accessories
Holybro Pix32 V6 FC Module Only
SKU: 1812213- High-performance STM32H743 Processor with more computing power & RAM
- New cost-effective design with the low-profile form factor
- A newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
SKU: 1812213 -
Flight Controller & Accessories
Holybro Pix32 v6 Flight Controllers FC Module Standard Set
SKU: 1444801- High-performance STM32H743 Processor with more computing power & RAM
- New cost-effective design with the low-profile form factor
- A newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
SKU: 1444801 -
Flight Controller & Accessories
Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
SKU: 1792279- Model: Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
- High-performance H7 Processor with clock speed up to 480 MHz
- New cost-effective design with low-profile form factor
- Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
- Newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
SKU: 1792279 -
-
Flight Controller & Accessories
Holybro Pixhawk 6X-RT (Developer Edition) Standard Set
SKU: R110845- High performance dual core i.MXRT1176 Processor with Cortex-M7 @ 1GHz – Cortex-M4 @ 400MHz
- Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
- Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
- MCU: i.MXRT1176
- Cortex-M7 @ 1GHz
- Cortex-M4 @ 400MHz
- 2MB SRAM
- 64MB Octal SPI Flash
SKU: R110845 -
Flight Controller & Accessories
Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC (2.54 mm Dupont)
SKU: 1735921- Product: Pixhawk PWM Cable for Tekko32 4in1 ESC
- For Use With: Durandal, Pixhawk 32 v6 & V5, Pixhawk 4 Mini, Pixhawk 6C Mini, Pixhawk 6X/5X Standard
Baseboard or RPI CM4 Baseboard - Cable Length (cm): 20
- Connector: 2.54mm Dupont to JST SHR 8Pin
- Cable Size (AWG): 28
SKU: 1735921 -
Flight Controller & Accessories
Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC (GHR 10 Pin)
SKU: 1735923- Product: Pixhawk PWM Cable for Tekko32 4in1 ESC
- For Use With: Pixhawk 4, Pixhawk 6C, Pixhawk 6X/5X with Mini Baseboard
- Cable Length (cm): 20
- Connector: JST GHR 10Pin to JST SHR 8Pin
- Cable Size (AWG): 28
SKU: 1735923 -
Flight Controller & Accessories
Holybro PM08 Power Module (14S, 200A)
SKU: 1777629- Model: Holybro PM08 Power Module (14S, 200A)
- Support 2S – 14S Battery
- 200A Cont. Current Rating
- Easy to Setup
- Aluminum Case for Heat dissipation
- Dimensions: 101*45*26mm
- Mounting hole: 79mm*38.1mm
- Weight: 151g
SKU: 1777629 -
-
-
Flight Controller & Accessories
Holybro Tekko32 F4 4in1 Mini 50A ESC
SKU: 1777636- Model: Holybro Tekko32 F4 4in1 Mini 50A ESC
- Dimensions: 32 x 40 mm
- Supports DShot 150/300/600/1200/2400.
- Compatible with MultiShot, OneShot, Proshot, PWM, etc.
- ESC telemetry supported for enhanced monitoring.
SKU: 1777636 -
Flight Controller & Accessories
Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
SKU: 1777637- Model: Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
- Metal-cased MOSFET
- Smooth control and quick response
- Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
SKU: 1777637 -
-
Flight Controller & Accessories
Kakute F4 Flight Controller
SKU: 1104558- MCU: STM32F405RGT6Â 32-bit processor
- IMU: ICM20689 (SPI)
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 3 hardware UARTS (UART1,3,6)
- 128 Mbit Dataflash chip for Blackbox logging
- 5v Power Out: 1.5 A max
- 3.3v Power Out: 200 mA max
SKU: 1104558 -
Flight Controller & Accessories
Mamba F4 pro V2 flight controller
SKU: 1176663- Model: Mamba F4 pro V2
- Input voltage: 2 – 6s LiPo support
- Gyroscope: MPU6000 (reserved external gyroscope interface)
- Firmware: BetaFlihgt 3.2.0 OMNIBUSF4SD
- Support Receiver: PPM, SBUS, IBUS, DSM2/DSMX Receiver (UART1)
- Integrated with OSD, support BF Ground Station adjust OSD
- Adjust the PID by OSD by remote control
SKU: 1176663 -
-
-
-