3D printer
Showing 1–48 of 110 results
-
-
-
-
Heat Shrink Tubes / Sleeve, Sleeves and Drag Chain
Nylon 2M mesh tube/braided nylon sleeve for Wire Protection
Heat Shrink Tubes / Sleeve, Sleeves and Drag ChainNylon 2M mesh tube/braided nylon sleeve for Wire Protection
SKU: 53506- Width: 8 mm
- Length: 2 M.
- Operating temperature range: -70ºC to +155ºC
- Melt temperature: 250 ºC
- Lasts longer than cable ties
- Reduce harness weight
- Easy access to breakouts
SKU: 53506 -
-
-
3D Printer Stepper Motors, Nema 17 Stepper Motors
MakerBase MKS Closed Loop Nema 17 SERVO42 Motor with Adapter for 3D Printers (Without Display) V1.1
3D Printer Stepper Motors, Nema 17 Stepper MotorsMakerBase MKS Closed Loop Nema 17 SERVO42 Motor with Adapter for 3D Printers (Without Display) V1.1
SKU: 1121357- Model: MKS SERVO42A V1.1
- Input voltage: 12V-24V
- Peak output current: +-2A
- Closed-loop feedback frequency: 6kHz
- Precision: under 0.1125 degree
- Micro stepping: 16/32/64/128/256 (Default16)
SKU: 1121357 -
3D Printer Display and Controller
GT2560 Mainboard, Mega2560
SKU: 112131012V 12A and 12V 5A power supply
Extended LCD & SD card interface
Six endstop input (X-MIN, Y-MIN, Z-MIN Y-MAX, X-MAX, Z-MAX)
Three inputs for thermistor (TEMP1, TEMP2 and TEMP3)
Three input for 12V cooling fan
One PWM outputSKU: 1121310 -
Other 3D Printer Accessories
EasyMech 16 Pcs Set of 1 mm SS Heat Bed Spacer Compression Spring for 3D Printer OD 7.4mm X ID 5.4mm X L12 to L30mm
Other 3D Printer AccessoriesEasyMech 16 Pcs Set of 1 mm SS Heat Bed Spacer Compression Spring for 3D Printer OD 7.4mm X ID 5.4mm X L12 to L30mm
SKU: 990628- Material: Stainless Steel
- Outer Diameter (OD): 7.4
- Inner Diameter (ID): 5.4
- Length (MM): 12 to 30 (see Package Includes)
- Quantity: 16
SKU: 990628 -
Limit Switch
Optical Endstop Photoelectric Light Control Optical Limit Switch for 3D Printer
SKU: 815859- Increased reliability
- Increased precision
- Dimensions : 33 x 11 x 10 mm.
- Weight: 10 gm.
- Optical Endstop Switches help to protect your 3D printer or machine from moving past its intended range and damaging itself.
SKU: 815859 -
3D Printer Stepper Motors, Nema 23 Stepper Motors
JK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
3D Printer Stepper Motors, Nema 23 Stepper MotorsJK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
SKU: 770762- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Motor Typr: Bipolar
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm
SKU: 770762 -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Cold White
SKU: 559684- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: 559684 -
3D Printer Extruder Kit
Complete Kit of MK8 Extruder with 0.4mm Nozzle (Assembled)
SKU: 503630- High-Quality Single End Cartridge Heater(Heating Element )
- High-quality stepper motor with larger torque and less heat buildup
- Uniform heating aluminium heater block
- Direct transmission, without the heavy gears, compact size and weight
- The lever mechanism makes filament insertion and extraction a breeze
- High-Quality Single End Cartridge Heater(Heating Element )
- High-quality stepper motor with larger torque and less heat buildup
- Uniform heating aluminium heater block
- Direct transmission, without the heavy gears, compact size and weight
- The lever mechanism makes filament insertion and extraction a breeze
SKU: 503630 -
Sleeves and Drag Chain
Nylon 25mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457748- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457748 -
Sleeves and Drag Chain
Nylon 20mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457746- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457746 -
Sleeves and Drag Chain
Nylon 16mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457743- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457743 -
Sleeves and Drag Chain
Nylon 14mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457736- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457736 -
Sleeves and Drag Chain
Nylon 12mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457716- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457716 -
Sleeves and Drag Chain
Nylon 8mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457001- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457001 -
Sleeves and Drag Chain
Nylon 6mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 456976- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 456976 -
Sleeves and Drag Chain
Nylon 2mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 451058- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 451058 -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Brown
SKU: 316800- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: 316800 -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Beige colour
SKU: 316794- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: 316794 -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Gold
SKU: 316789- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: 316789 -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Purple
SKU: 316782- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: 316782 -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Grey
SKU: 316778- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: 316778 -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Silver
SKU: 316774- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: 316774 -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Pink
SKU: 316770- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: 316770