3D printer
Showing 97–110 of 110 results
-
Stepper Motor Drivers
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
Stepper Motor DriversMACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
SKU: 18988- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
SKU: 18988 -
Stepper Motor Drivers
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
SKU: 16048- Supply Voltage: 12V
- Standard interfaces (as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A added to protect the component parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
SKU: 16048 -
Shield for Arduino
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Shield for ArduinoCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
SKU: 12202- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: 12202 -
3D Printer Extruder Kit
1.75mm Direct Extruder Full Kit
SKU: 12082- Nozzle diameter: 0.4mm
- Voltage: 12V.
- Power: 40W.
- Operating Temperature: 200ºC to 280ºC
- Compatible for ABS and PTEG material
- Feed diameter : For 1.75mm Filament (Direct)
- Heater size : 6 x 15mm (DxL).
- 1.75mm Direct Extruder Full Kit
SKU: 12082 -
3D Printer Display and Controller
3D printer 128×64 Smart LCD controller for ramps 1.4
SKU: 12072- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
SKU: 12072 -
3D Printer Extruder Parts and Fans
12v 40W Ceramic Cartridge Heater
SKU: 12067- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
SKU: 12067 -
3D Printer Display and Controller
2004 LCD Display RepRapDiscount Smart Controller with Adapter
SKU: 12060- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
SKU: 12060 -
3D Printer Extruder Parts and Fans
Thermistor 100k NTC with 1 Meter Cable Temperature Sensor
SKU: 11993- Temperature range of use: −40°C to 270°C.
- Dissipation power factor: ≥5 mW/℃ (static in the air).
- 100k Ohm NTC Thermistor.
- NTC Thin Film Thermistor Cable.
- Max power rating: 45 mW
- The hot time constant: ≤7 s(in the air)
SKU: 11993 -
-
DIY 3D Printer Kits
5th Gen Prusa i3 Desktop 3D Printer DIY Kit (Unassembled)
SKU: 3621- AC Input Voltage:Â 100-120VAC/4.8A or 200-240VAC/2.4A
- Layer Resolution: ±0.10mm
- Printing Material:Â PLA, ABS, PVA, PEVA, HIPS
- 3D flatbed printer.
- Acrylic Plate, more stable and durable.
- Support ABS, PLA, PVA, WOOD, and NYLON easy to use.
- Support SD card with LCD for off-line printing (Included with the printer).
- Support Bowden extruder.
SKU: 3621 -
3D Printing Pen
3D Printing Pen w/Filament and Power Adapter
SKU: 3605- Input Voltage: 100-240 V AC.
- Temp: 160~230 Deg settable.
- Filament: 1.75 mm PLA or ABS.
- This 3D Pen is designed for the freehand drawing of 3-Dimensional objects
- Adjustable output speed, temperature
- Create projects horizontally or vertically
SKU: 3605