Generic
Showing 433–480 of 6083 results
-
Soldering Tools
TE-801 Multi-function LED Magnifier PCB Soldering iron Stand Holder Table Magnifying glass 35X 12X w/ 2-LED Light
Soldering ToolsTE-801 Multi-function LED Magnifier PCB Soldering iron Stand Holder Table Magnifying glass 35X 12X w/ 2-LED Light
SKU: 17940- A useful Aid for soldering work or model makers
- Battery required for light: 3 x AAA
- Adjustable crocodile holding clamps
- The bottom battery compartment is furnished with steel plate which can enhance stability
- Ideal when a third hand is needed
- With two LED lighting, this model can work very well in the dark environment
SKU: 17940 -
-
-
PCB Adapter
Sop16 Sop28 To Dip16 Dip28 Pcb Adapter
SKU: 108195This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board. You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging. So that You need not to buy the DIP chips for prototyping especially.Just solder the SMD chips on the board and plug it into the breadboard will make you convenient to do prototyping.
SKU: 108195 -
Plastic Push Button Switch
6x6x5mm Tactile Push Button Switch (Pack of 20)
SKU: 615295- Ideal for Through-hole applications.
- Used in the fields of electronic products, household appliances and more.
-
This light touch switch is waterproof, prevent oil, anti-pollution, anti-static interference.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical conductivity.
SKU: 615295 -
IMU, Accelerometer, Magnetometer & Gyroscope
ADXL335 Module 3-axis Analog Output Accelerometer
SKU: 12231- Onboard LDO Voltage regulator
- Can be interfaced with 3V3 or 5V Microcontroller.
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
SKU: 12231 -
-
-
-
-
-
Battery Pack Accessories & Holders
3 X 6 18650 Battery, Holder with 18.5MM, Bore Diameter
SKU: 1121243- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1121243 -
-
Seven Segment Display
0.56 inch Red 4 Digit 7 Segment LED Display CC 12pin (2 pcs.)
SKU: 617788- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Blackface and RED LED segments
- Type: Common cathode
- No. of Pins: 12
- Low Current Consumption
- High Brightness
- Easy to Use with PCB Mounting as well as on Breadboard
SKU: 617788 -
-
-
-
IMU, Accelerometer, Magnetometer & Gyroscope
HW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor
IMU, Accelerometer, Magnetometer & GyroscopeHW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor
SKU: 12038- 3-axis Gyro+Acceleration+Magnetic Fiel
- Air Pressure Module
- Power supply: 3-5V
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from motor and other high current electronics
- You can easily select two I2C address for MPU6050 by soldered jumper
SKU: 12038 -
-
-
3D Printer Nozzle
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.4mm (for 3D printer)
SKU: 294106Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
SKU: 294106 -
Sleeves and Drag Chain
Nylon 8mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457001- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457001 -
Relay Modules
ESP8266 ESP-01 5V WiFi Relay Module
SKU: 835798- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: 835798 -
Solenoids and Electromagnets
DC 24V KK-P20/15 3KG Lifting Solenoid Electromagnet
SKU: 867162- Operating Voltage: 24V DC
- Lifting Capacity: 3 KG
- Size (D x L): 20x 15 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 867162 -
-
Refurbished, Refurbished Motors | Drivers | Pumps | Actuators
Refurbished – 15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding
Refurbished, Refurbished Motors | Drivers | Pumps | ActuatorsRefurbished – 15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding
SKU: 1757795- Operating voltage: 12 VDC
- Rated current: 800mA
- Inflation time: <6 seconds (from 0 to 300 mmHg in a 1000CC closed container)
- Minimum pressure: >400 mmHg (53.33KPa)
- Maximum pressure: 750.062mmHg (100KPa)
- Hermeticity: <5mmHg (from 1000mmHg in 1000CC container min), airtight only for inflation
- Flow rate: >15 L/Min
- Noise: <55dB (test at 30cm distance)
- Lifetime: 100,000 cycles tested
SKU: 1757795 -
Plastic Push Button Switch
12x12x12mm Tactile Push Button Switch-10Pcs.
SKU: 618207- Through-hole design.
- Shaft Shape: Round
- Function: Push to ON
- High operating force (3.0N or 3.6N) suited to automotive equipment requirements
- The long life of 300,000 cycles realized despite the high operating force
- Middle stroke (1.05mm)
SKU: 618207 -
-
3D Printer Extruder Parts and Fans
PC4-01 Pneumatic Push for V6 Bowden Extruders 4mm tube J-Head Fitting
3D Printer Extruder Parts and FansPC4-01 Pneumatic Push for V6 Bowden Extruders 4mm tube J-Head Fitting
SKU: 921908- Inside Diameter: 4mm
- Thread Size: M10
- PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament)
- Materials:Â Nickel Plated Brass
- Release Method:Â Elliptical John Guest Fitting
SKU: 921908 -
Thermoelectric Peltier Elements
12V PTC Heaters Heating Element Hair Dryer Accessories Curlers Heater 220 Degree Celsius Air Heater
Thermoelectric Peltier Elements12V PTC Heaters Heating Element Hair Dryer Accessories Curlers Heater 220 Degree Celsius Air Heater
SKU: 975673- Heating Material: PTC Thermistor
- Shell Material: Aluminum
- Lead wire: Silicone Line
- Voltage: 12V
- Power: 30W
- Surface Dry Heating Temperature: 220ºC
SKU: 975673 -
Other Measuring Instrument, Temperature & Humidity Sensor
GM320 Non-Contact Infrared (IR) Handheld Temperature Meter
Other Measuring Instrument, Temperature & Humidity SensorGM320 Non-Contact Infrared (IR) Handheld Temperature Meter
SKU: 45667- Temperature range: -50 to 330°C
- Accuracy: ±1.5% or ±1.5°C
- Resolution: 0.1°C or 0.1°F
- Repeatability: 1% of reading or 1°C
- Supply Voltage: 3V DC (2 x AAA Battery)
SKU: 45667 -
Raspberry Pi Case
Raspberry Pi 4 Black Compact ABS Case
SKU: 620015- Only 3-piece ABS case with access to all Ports on pi 4
- Compatible for All variants of the Raspberry pi 4 Model B
- Easy to assemble and highly durable material
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- locking screw holes and anti-slip rubber feet at the back.
SKU: 620015
