Generic
Showing 481–528 of 6106 results
-
Display for Arduino
2.4″ Inch Touch Screen TFT Display Shield for Arduino UNO Mega
SKU: 766310- 2.4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
SKU: 766310 -
-
-
3D Printer Extruder Parts and Fans
PC4-01 Pneumatic Push for V6 Bowden Extruders 4mm tube J-Head Fitting
3D Printer Extruder Parts and FansPC4-01 Pneumatic Push for V6 Bowden Extruders 4mm tube J-Head Fitting
SKU: 921908- Inside Diameter: 4mm
- Thread Size: M10
- PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament)
- Materials:Â Nickel Plated Brass
- Release Method:Â Elliptical John Guest Fitting
SKU: 921908 -
-
-
Workbench Tools
31 in 1 Universal Multifunction Portable Screwdriver Set
SKU: 305777- Compact and Portable pocket toolkit
- 30 different head style
- Rubber Shockproof gripped handle
- Strong and durable plastic Case
- Colour: Yellow-Red
- Interchangeable Precise Manual Tool Kit.
- High Strength Chrome Alloy is used to manufacture this tool.
- Magnetic bits are easy to fit into the handle.
- Heat resistant.
SKU: 305777 -
Potentiometer & Trimmers
10kΩ 0.2W 6 Pin 2 Gang Rotary Carbon Potentiometer (15mm)
SKU: 872025- Potentiometer Type: Rotary
- Maximum Resistance: 10kΩ
- Number of Gangs: 2
- Number of Turns: 1
- Power Rating: 0.2W
- Electrical Taper: Linear
- Element Material: Carbon
- Mounting Type: Panel Mount
- Termination Style: PC Pin
- Shaft Length: 15mm
- Shaft Diameter: 6.35 mm
- Tolerance: ±20%
- Actuator Type: Knurled Shaft
SKU: 872025 -
-
-
1S Li-ion BMS
1S 18650 3.7V lithium battery protection plate 6 MOS
SKU: 44100- Over charge detection voltage : 4.25 + 0.05V
- Over charge release voltage : 4.23 + 0.05V
- discharge detection voltage : 2.45 + 0.1V
- Ceiling continuous current : 12A
- Overcurrent detection current : 15A
- Input Charging voltage : 4.2V
- Product size : 35*7.4*2.2MM
- IC components : DW01+8205A
SKU: 44100 -
Audio Amplifier Module
AVR ISP 10 Pin to 6 Pin Adapter Board
SKU: 31145- Made of high-quality material, practical and durable
- No. of Pinon USBASP side: 10.
- No. of Pinon Device under programming side:Â 6.
- Connector type on USBASP side:Â Male.
- Connector type on Device under programming side:Â Female.
- Header Pin Pitch: 2.54mm (0.1in).
- Pin Numbers Text: Yes on Top and Bottom sides of every pin.
SKU: 31145 -
-
Battery Pack Accessories & Holders
CR2032 CR2025 Coin Battery Socket Holder-5Pcs.
SKU: 309532- CR2032 / CR2025 Holder
- Generally used for holding 3v Lithium coin batteries.
- PCB mountable 3v Battery holders which can be soldered directly to PCBs.
- Can be used for experimental boards, toys and small robots etc.
- It is also suitable for 3V Lithium Coin batteries used in Laptops / Computers / Notebooks etc.
SKU: 309532 -
PVC wire
2 Meter UL1007 20AWG PVC Electronic Wire (Red)
SKU: 528324The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528324 -
-
-
-
-
-
-
Battery Connector
4mm Banana Socket Jack for Banana Plug Terminal Connector(Pack of 2)
SKU: 497666-  With aluminum alloy core, nickel plated, and a solid hard plastic shell.
- Â Suitable for 4mm banana plugs, spade terminals or a bare wire, easy to install and use.
- Â Ideal for speaker enclosure applications and amplifier, perfect for connecting center speakers to AV receivers.
SKU: 497666 -
Audio Amplifier Module
TDA2030A 6-12V 18W Audio Amplifier Module
SKU: 815861- Operating voltage: 6 to 12V DC
- Onboard TDA2030A Audio amplifier IC
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- 10 k adjustable resistance to adjust the volume of the amplification
- Onboard power indicator light
- Chip has lead to the main pin, can directly input the audio signal
SKU: 815861 -
-
-
-
-
-
Battery Pack Accessories & Holders
2 x 21700 Battery Holder with 21.2MM Bore Diameter
SKU: 1187455- Model: 21700 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 21.2MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187455 -
-
Gears
Rack and pinion gear pulley plastic shaft worm gear reducer for robot DIY assorted kit- 34 Kindsrobot kits
GearsRack and pinion gear pulley plastic shaft worm gear reducer for robot DIY assorted kit- 34 Kindsrobot kits
SKU: 781385- Product: Rack and pinion gear pulley plastic shaft set
- Easy to change when the gear is missing or damaged, as a spare accessory to use.
- Made of high-quality plastic, wearable, and long service life.
- Small parts, easy to use.
SKU: 781385