Generic
Showing 817–864 of 6083 results
-
-
Stepper Motor Drivers
A4988 Stepper Motor Driver Controller Board- RED
SKU: 699614- Compact size, easy to install and use.
- All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).
- Jm connection motor: Jv Connects 5V and 12V-24V Power Supply.
- E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
SKU: 699614 -
-
Signal Generator Module & Oscilloscopes
EGS002 EG8010 + IR2113 DC-AC SPWM Pure Sine Wave Inverter Module
Signal Generator Module & OscilloscopesEGS002 EG8010 + IR2113 DC-AC SPWM Pure Sine Wave Inverter Module
SKU: 896558- 5V single power supply.
- Wave frequency adjustable 0-400Hz adjustable frequency pure sine wave.
- Unipolar and bipolar modulation mode.
- External 12MHz crystal oscillator.
- PWM carrier frequency 23.4KHz.
- Voltage, current, temperature feedback real-time processing.
- Overvoltage, Undervoltage, overcurrent, overheating protection function.
- Pin set soft-start mode 1S response time.
- Serial communication to set the output voltage, frequency and other parameters.
SKU: 896558 -
-
SMD Resistor
RC1206FR-0710RL, Yageo, SMD Chip Resistor, 10 ohm, ± 1%, 250 mW, 1206 [3216 Metric], Thick Film, Precision
SMD ResistorRC1206FR-0710RL, Yageo, SMD Chip Resistor, 10 ohm, ± 1%, 250 mW, 1206 [3216 Metric], Thick Film, Precision
SKU: 1798003- Resistance: 10 ohm
- Resistance Tolerance: ± 1%
- Power Rating: 250mW
- Resistor Case / Package: 1206 [3216 Metric]
- Resistor Technology: Thick Film
- Packaging Type: Cut Tape
- Full Reel: 5000/Reel
SKU: 1798003 -
-
-
-
-
PIR / IR and Optical Sensor
Switch Infrared Beam Photoelectric Sensor Photocell E3JK-5DM1 DC12-24V Detecting Distance 5M
PIR / IR and Optical SensorSwitch Infrared Beam Photoelectric Sensor Photocell E3JK-5DM1 DC12-24V Detecting Distance 5M
SKU: 975818- Detection method: on-beam
- Detection distance: 5 m ± 10%
- Detecting objects: opaque objects
- Working voltage: AC and DC universal 12~24v
- Output mode: AC and DC universal five-wire relay output, normally open + normally closed
- Housing material: ABS housing
SKU: 975818 -
Soldering Tools
SN390 Adjustable Printed Circuit Board Holder Frame PCB Soldering Assembly Stand Clamp
Soldering ToolsSN390 Adjustable Printed Circuit Board Holder Frame PCB Soldering Assembly Stand Clamp
SKU: 456146- Adjustable printed circuit board holder frame.
- Solid metal base and ABS arm with spring-loaded clamp support 360-degree rotation easy to flip the board.
- Adjustable width and 4 clamping thickness size to accommodate various board sizes up to 200mm wide and up to 3mm thick.
SKU: 456146 -
-
Lead Screw and Nut
600mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw and Nut600mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
SKU: 51725- Lead Screw Material: 304 Stainless Steel.
- Length: 600mm.
- Diameter: 8mm.
- 4 Start Lead Screw
- Brass Nut Size: 22 (Body Diameter) x 15 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
SKU: 51725 -
USB Interface Module
HEXIN RS232 to RS485 serial port Data interface adapter Converter
SKU: 766352- Transmission distance: 1.2 mile (RS-485), 5 meters(RS-232)
- Transmission Speed: 300-115200 bps
- Working Modes: Asynchronous, half-duplex, differential transmission
- Transmission Media: Common wire, doule wire, UTP or Shielding Line
- Work Environment: -10°C to 85°C
SKU: 766352 -
-
Digital Voltage, Current and Frequency Meter
Red Two-Wire 0.56 Inch DC5V-120V DC Digital Display Voltmeter For Car Bicycle Motorcycle
Digital Voltage, Current and Frequency MeterRed Two-Wire 0.56 Inch DC5V-120V DC Digital Display Voltmeter For Car Bicycle Motorcycle
SKU: 1187640- Voltage Measuring Range: 0 to 200 VDC
- It is a 2-wire display.
- LED Color: Red
- Current Consumption: Less than 20mA, generally 5-15mA
- Accuracy: 0.1 V.
- Refresh Speed: 300mS/time.
SKU: 1187640 -
-
-
-
-
-
3D Printer Extruder Kit
All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
3D Printer Extruder KitAll complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
SKU: 422131This All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the thermistor, heater block, 0.2 mm Nozzle, sleeving, cooling fan with holder.
SKU: 422131 -
Water TDS, pH, Flow, Level and Pressure Sensor
Square 2M Float Switch For Industry Pump Tank Sensor
SKU: 1150818- Rated current/voltage: 10(8A) 250V ~ 10(4A) 380V
- Protection class: IP68
- Working pressure:0.1MPa
- Operating temperature: 0~75℃
- Electrical life: 1 x 100 000 times
- Mechanical life: 5 x 100 000 times
SKU: 1150818 -
Thermoelectric Peltier Elements
12V PTC Heaters Heating Element Hair Dryer Accessories Curlers Heater 120 Degree Celsius Air Heater
Thermoelectric Peltier Elements12V PTC Heaters Heating Element Hair Dryer Accessories Curlers Heater 120 Degree Celsius Air Heater
SKU: 975672- Heating Material: PTC Thermistor
- Shell Material: Aluminum
- Lead wire: Silicone Line
- Voltage: 12V
- Power: 30W
- Surface Dry Heating Temperature: 120ºC
SKU: 975672 -
Linear Actuators
Linear Actuator Stroke Length 100MM,7mm/S,1500N,12V
SKU: 618167- Permanent magnet DC motor drive: Voltage 12VDC
- Self Locking Force: 1500N
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: A service life of more than 50000 times.
SKU: 618167 -
-
Audio Amplifier Module
PAM8406 Digital Amplifier Module With Volume Control Potentiometer 5Wx2 Stereo
Audio Amplifier ModulePAM8406 Digital Amplifier Module With Volume Control Potentiometer 5Wx2 Stereo
SKU: 398264PAM8406 Digital Amplifier Module With Volume Control Potentiometer is an excellent noise suppression module. If you don’t receive input audio, you will not hear any noise on your ears.
SKU: 398264 -
Audio Amplifier Module
DC12-24V TPA3116D2 2.1 Channel Digital Subwoofer Power Amplifier Board
SKU: 211241- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
SKU: 211241