Generic
Showing 1537–1584 of 6100 results
-
Other ESP WIFI Modules
RTL8188 Mini USB wireless Network Card 150Mbps Wi-Fi Dongle
SKU: 1326850- RTL8188cus Chipset
- Mini portable USB 2.0 design.
- Wireless N speed up to 150Mbps, ideal for internet surfing and online gaming.
- Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards.
- MIMO technology makes wireless transmission rates up to 600Mbps wifi antenna.
- 600Mbps Wireless Wifi USB Dongle/Wireless USB Adapter/Wireless Network Card
SKU: 1326850 -
Emax Servo Motor
EMAX ES9251 II 4.5V-6V Plastic Micro Digital Servo 2.5gm for RC Models
SKU: 596521- Operating Voltage: 4.5~6.0V
- STD Direction: Counter Clockwise / Pulse Traveling 1500 to 1900usec
- Stall Torque: 4.8V 0.3 Kgf.cm
- Operating Speed: 4.8V 0.08 Sec/60° at no load
- Type: Digital
- Material: Plastic
SKU: 596521 -
-
-
Panel Indicator Lights
Red AC/DC24V 16mm AD16-16SM LED Signal Indicator Built-in Buzzer
SKU: 1364626- Model: AD16-16SM
- Easy for installation
- LED Signal Indicator Built-in Buzzer
- Good environmental Protections
- Very low Power consumption
- Available in various sizes, colors, and voltage rating
SKU: 1364626 -
Drone Motor
Set of 4 A2212 1400KV Brushless Motor for Drone with SimonK 30A ESC and Orange 1045 Propeller Set
Drone MotorSet of 4 A2212 1400KV Brushless Motor for Drone with SimonK 30A ESC and Orange 1045 Propeller Set
SKU: 5931- Offers great performance and value for money.
- Comes in the compact sizes.
- Suitable for airplane, aircraft, quadcopter.
- ESC used has an On-Board BEC.
- Faster and Better speed control.
SKU: 5931 -
-
-
Environmental Sensors
Wind Speed Sensor Current Type(4 to 20mA) Anemometer Kit (Waterproof & Industrial)
Environmental SensorsWind Speed Sensor Current Type(4 to 20mA) Anemometer Kit (Waterproof & Industrial)
SKU: 949449- The mode of its output signal:4 to 20mA
- supply voltage: DC 12-24V.
- Power consumption: MAX≤0.3W.
- Start wind speed:0.4-0.8m/s.
- Effective measurement range:0-30m/s
- Transmission distance (m):< 1000 m
SKU: 949449 -
-
-
-
Smart Vision Cameras
1600X 3 in 1 USB Digital Microscope Camera Endoscope 8LED Magnifier with Stand 3-in-1 Type-c Electronic Magnifier Endoscope
Smart Vision Cameras1600X 3 in 1 USB Digital Microscope Camera Endoscope 8LED Magnifier with Stand 3-in-1 Type-c Electronic Magnifier Endoscope
SKU: 1150650- Specification: Magnification: 1600X
- Light source: 8 LED lights
- Resolution: 1920×1080, 640*480
- Pixel: 30W
- Focal length: 3-40mm manual adjustment
- Support Android 4.2 or above/widows/Mac system
SKU: 1150650 -
Relay Modules
2 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
Relay Modules2 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
SKU: 1121231- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: High and low-level trigger
- Load Voltage: DC 30V / AC 250
- Load Current: 30A
- Relay Life: more than 100,000 times
SKU: 1121231 -
-
-
-
3D Printer Nozzle
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.2mm (for 3D printer)
SKU: 293809Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
SKU: 293809 -
Cooling Fans
DC12V 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187514- 45mm Radial Cooling fan.
- 12V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187514 -
-
Temperature & Humidity Sensor
HR 202 Humidity Detection Sensor Module
SKU: 366395- Adjustable Sensitivity, External GND.
- Detect Ambient Humidity.
- Provided with Fixed Bolt Hole, Convenient to Install.
- Power Indicator Light & Digital Output Indication Lamp.
- Using LM393 Chip for Stable Work.
- DO Small Digital Outputs Interface (0 & 1).
SKU: 366395 -
N20 Metal Gear Motors
N20-3V-200 RPM Micro Metal Gear-box DC Motor
SKU: 475212- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475212 -
-