Generic
Showing 1681–1728 of 6094 results
-
-
-
-
-
-
-
-
3D Printer Extruder Parts and Fans
3mm*4mm PTFE Teflon Tube for 3D Printer
SKU: 1308010- Color: White
- Inner diameter: 3 mm
- Operating Temperature Range: -180°C to +260°C
- Outer diameter: 4 mm
- It is used for the E3D V6 Extruder.
- It has unique lubricity and the surface is no sticky.
- Material: PTFE
- Length: 1 Meter
SKU: 1308010 -
-
Battery Pack Accessories & Holders
4 X 4 32650 Battery Holder
SKU: 1676137- Model: 32650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 32.35MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1676137 -
Raspberry Pi Case
ABS Transparent Case for Raspberry Pi Zero/ Zero W
SKU: 456221- Use for – both raspberry pi zero w and v1.3
- GPIO reference on the top of the case – you needn’t look at the GPIO reference from screen, paper or rule.
- The hole on the bottom of the case –   you can change the case on the wall by the hole.
- Translucent color design – make the case more beautiful and you can see the pi in the case.
SKU: 456221 -
-
-
-
-
Battery Pack Accessories & Holders
2 x 26650 Battery Holder with 26.3MM Bore Diameter
SKU: 1187457- Model: 26650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 26.3MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for EBike!
SKU: 1187457 -
-
-
-
-
Plastic Push Button Switch
12x12x7.3 mm Round Cap for Square tactile Switch – Green (10 Pcs.)
SKU: 890233- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
SKU: 890233 -
-
Stepper Motor Drivers
3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module
SKU: 815797This 3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module is a pulse generating module, which used as a signal for stepper drivers. To control the stepper motor,
SKU: 815797 -
Other Ultrasonic Sensors
Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board
SKU: 221002- Onboard STM8S103 high-performance microprocessor
- With digital tube display
- Valid Measurement Distance: 3-400cm
- Display Unit: cm
- Maximum Input Voltage: 5VDC
- 2.54mm White Socket: 5V power interface.
SKU: 221002 -
Raspberry Pi Case
Acrylic Case for 7-Inch Display and Raspberry Pi
SKU: 220877- Suitable for Raspberry pi 7-inch touch/Non-Touch screen
- Raspberry Pi Board can be installed in the back, saving space
- Easy to Assemble and install.
- Acrylic Black and White bracket
- Using high-quality black and white acrylic material
- Two kinds selected inclination angle: 45 ° and 60 °
SKU: 220877
