Generic
Showing 289–336 of 6095 results
-
Boost Converter
3.7V to 12V Mini DC-DC Boost Step Up Converter Board Module 5V/ 8V/ 9V 12V Output
SKU: 1150680- Input Voltage:2.5V~VOUT-0.5V
- Â Output Voltage:Â can be set to 5V/8V/9V/12V
- The maximum output current reaches 1A.
- Low power consumption.
- The LED indicator can be turned off by the pad next to it.
SKU: 1150680 -
Vibration/Tilt Sensor and Modules
Reed Switch 2 x 14 mm Magnetic Control Switch -Normally Open Contact-(Pack of 10 Pcs.)
Vibration/Tilt Sensor and ModulesReed Switch 2 x 14 mm Magnetic Control Switch -Normally Open Contact-(Pack of 10 Pcs.)
SKU: 44305- Small Module.
- Very easy to use.
- Glass Length:Â 14mm
- Glass Diameter:Â 2mm
- Total Length:Â 45mm
- Max. Switching Voltage: 300 VDC
- Min. Breakdown Voltage: 150 VDC
- Max. Contact Rating:Â 10W
- Max. Switching Current: 0.55 A
- Max. Operate time:Â 0.45 ms
SKU: 44305 -
-
-
Raspberry Pi Case
New High Quality Transparent ABS Case for Raspberry Pi 3/3+ with Slot for Cooling Fan & GPIO
Raspberry Pi CaseNew High Quality Transparent ABS Case for Raspberry Pi 3/3+ with Slot for Cooling Fan & GPIO
SKU: 130272- This simple case provides tough protection for your raspberry pi along with access to ports
- High Quality two-piece injection-molded ABS enclosure
- Click together design, no screws, standoffs or elastic bands required
- It is easy to use. You just need to click them together after you fix your pi board on it with screws.
- 4 x Non-slip Silicone Gaskets provided, which can be stuck to the bottom four corners of the box, to prevent it from slipping when placed on a surface.
SKU: 130272 -
Temperature & Humidity Sensor
MAX6675 Thermocouple Sensor Module
SKU: 223518- High impedance differential inputs.
- Thermocouple break detection.
- 2000V of ESD signal.
- Embedded thermocouple break detection circuitry.
- Compatible with K-type temperature probe
- Simple SPI serial output temperature.
SKU: 223518 -
-
-
-
Temperature & Humidity Sensor
AHT10 High Precision Digital Temperature And Humidity Measurement Module
Temperature & Humidity SensorAHT10 High Precision Digital Temperature And Humidity Measurement Module
SKU: 890180- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
SKU: 890180 -
Breakout Board
I2C Bi-Directional Logic Level Converter- 2 Channel
SKU: 835816- Dimensions: 11×15 x 2 (L x W x H) mm
- Weight: 1gm
- Mutual transform between 5V TTL and 3.3V TTL
- Two channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 4 pin contact pins
SKU: 835816 -
PVC wire
1 Meter UL1007 18AWG PVC Electronic Wire (Black)
SKU: 528259The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528259 -
-
-
PVC wire
2 Meter UL1007 22AWG PVC Electronic Wire (Red)
SKU: 528335The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528335 -
PCB Adapter
Leadfree so/msop/tssop/soic/sop8 to dip8 Wide-Body Narrow-Body Adapter Board PCB 8p – Pack of 5
PCB AdapterLeadfree so/msop/tssop/soic/sop8 to dip8 Wide-Body Narrow-Body Adapter Board PCB 8p – Pack of 5
SKU: 1121328- This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips.
- The side for pin pitch size 1.27mm, It can be used for most of the SO, SOP, SOIC to 2.54mm DIP.
- B side for pin pitch size 0.65mm, It can be used for most of the SSOP, TSSOP, MSOP to 2.54mm DIP.
SKU: 1121328 -
-
-
-
-
PVC wire
3 Meter UL1007 24AWG PVC Electronic Wire (Red)
SKU: 528345The use of PVC coating blends these wires with special properties such as self-extinguishing and flame retardant, and also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528345 -
-
-
-
-
USB Interface Module
SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module
SKU: 221377- Chip type: W5500.
- Supports both 3.3V & 5V.
- Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE.
- 10BaseT/100BaseTX Ethernet PHY embedded.
- Supports automatic response (full duplex/half duplex mode).
- Internal 32Kbytes Memory for Tx/Rx Buffers.
SKU: 221377 -
-
