Generic
Showing 337–384 of 6080 results
-
-
-
Breadboard and Zero PCBs
170 pts Mini Breadboard SYB-170 Transparent
SKU: 618297- Tie-points: 170 (10×17)
- Size: 48 x 35 x 10 mm(LxWxH).
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Phosphor bronze nickel plated spring clips
- Accepts a variety of wire sizes (29-20 the AWG)
SKU: 618297 -
-
-
-
-
-
-
-
-
Bluetooth and NRF Modules
HC-05 TTL Bluetooth Transceiver Module (Without Button)
SKU: 18596- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
- Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support
- Incredible small size with 3.3V input, and RoHS Compliant
- UART interface and with baud rate setup function
SKU: 18596 -
-
TowerPro and Other Servo Motors
TowerPro MG996R Digital High Torque Servo Motor (360° Rotation)
SKU: 618530- Weight: 55g
- Dimension: 40.7×19.7×42.9mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Dead band width: 1us
- Wire length: 32cm
SKU: 618530 -
Shield for Arduino
Proto Screw Shield 1.0 For Arduino Uno
SKU: 31244- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
SKU: 31244 -
-
Best Prices, USB Interface Module
W5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter
-25%
Best Prices, USB Interface ModuleW5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter
SKU: 699627- 80MHz high-speed SPI interface
- Built-in hardware TCPIP protocol stack
- Support up to 8 Socket connections
- Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocol
- Support power-down wake up
- Support high-speed serial peripheral interface (SPI mode 0~3)
- Internal 32K byte send and receive buffer
SKU: 699627 -
PVC wire
2 Meter UL1007 22AWG PVC Electronic Wire (Black)
SKU: 528328The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528328 -
DIP | Flat Dial Switches
3*6*2.5 mm SMD Tactile Switch (Pack of 20)
SKU: 524297- Used in the fields of electronic products, household appliances and more.
-
This light touch switch is waterproof, prevent oil, anti-pollution, anti-static interference.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical Conductivity.
SKU: 524297 -
-
PVC wire
1 Meter UL1007 18AWG PVC Electronic Wire (Red)
SKU: 528293The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528293 -
GPS Modules
NEO-6M GPS Module with EPROM – Normal Quality
SKU: 1270231- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: 1270231 -
Potentiometer Module
DC 3-5V X9C103S Digital Potentiometer Board Module for Arduino
SKU: 43886- Supply voltage: 3V-5V
- Chip: X9C103S
- Dimensions : 28 x 14 x 4 (LxWxH) mm.
- 10K span potentiometer.
- Potentiometer center tap between the 0-10k slide in total 100 (potentiometer wiper typical impedance 40 ohms)
SKU: 43886 -
USB Interface Module
SD Card Reading Writing Module for Arduino
SKU: 44160- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7Â x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
SKU: 44160 -
Other Metal Geared Motors
100RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU: 1137796- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2.9
- Stall Torque(kg-cm): 11.4
SKU: 1137796 -
Breakout Board
PAM 8610 Digital Stereo Class-D Amplifier Board 2x15W Output
SKU: 43918- Dual-Channel Stereo Output
- Run-on 7V to 15V power Supply
- 32 Steps DC volume control has a +32dB to -75dB range.
- 40 pin QFN 6 x 6 mm package.
- Much higher efficiency in terms of cost and performance than competitors’ ICs
SKU: 43918 -
-
-
LASER Module
SYD1230 12mm 5mw cross-line Laser Module – Red
SKU: 30650- Laser Output Type: Red Cross-Line Laser
- Dimensions: Diameter: 12mm, Lenght: 35mm.
- Weight: 15 gm.
- Wavelength: 650nm.
- Voltage: 3~6V.
- Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW.
- Working current: Min 10mA, Typical 20mA, Max 25mA.
- Focus point Intensity can be adjusted with help of lens ring head.
SKU: 30650 -
Lead Screw and Nut
500mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw and Nut500mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
SKU: 12041- Lead Screw Material: 304 Stainless Steel.
- Length: 500mm.
- Diameter: 8mm.
- 4 Start Lead Screw
- Brass Nut Size:Â 22(Body Diameter) x 15 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
SKU: 12041 -
-
-
Raspberry Pi Accessories
1/4 Cmos 640X480 USB Camera with Collapsible Cable for Raspberry Pi
SKU: 216740- Supports 300k pixels, a maximum resolution of 640×480, and VGA/ YUY2 packed formats
- Dimension: 40mm × 15mm × 30mm; designed for Raspberry Pi and PC
- With a retractable USB cable, convenient to store
- Applies USB 2.0 High-speed Sensor, plug-and-play, no driver installation
- High definition and true colour images.
SKU: 216740
