APM 2.8 Flight Controller with Built-in Compass

(16 customer reviews)
Availability:

In stock


SKU: 28963
  1. Model: APM 2.8
  2. Input Voltage (V): 12-16 V.
  3. Processor: ATMEGA2560 and ATMEGA32U-2
  4. Dimensions (mm) LxWxH: 70 x 45 x 15

 4,353.00

(Including GST)

In stock

Select below products to add together

APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A ₹ 433
Male To Female Jumper Wires 40 Pcs 10cm ₹ 38

New Price: ₹ 4353


Purchase this product now and earn 44 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Generic
Category: Flight Controller & Accessories

Are you want to be an Electronic Geek in the future and want to build your own drone then this Flight controller is best for you. The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to the Electronic Speed Controllers (ESC’s), which translates this desired speed into a signal that the motors can understand. This flight controller

APM 2.8 Multicopter Flight Controller is an upgraded version of 2.5 and 2.6 with a Built-in Compass for FPV RC Drone. The sensors are exactly the same as the APM 2.6 flight controller. However, the module has the option to use the built-in compass an external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.

The APM 2.8 Multicopter Flight Controller is a complete open source autopilot system. This is the best-selling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary-wing. In addition, it turns multirotor vehicles (even cars and boats) into a fully autonomous vehicle. meanwhile, it is capable of performing programmed GPS missions with waypoints.

To Explore more Flight Controllers, Click here

To Calibrate APM 2.8 flight controller Using Mission planner, Click here

 

Generic Microsoftteams Image 55 1

 


APM Flight controller Using the built-in compass:

To use the built-in compass simply connect the jumper as shown below. The APM board will use the external compass, during the compass jumper is removed.

Apm-Internal-Compass-Robu.in

Powerful ground control software features:

The downloadable mission planner software is used to configure and control your APM board:

  1. Point-and-click waypoint entry, using Google Maps.
  2. Select mission commands from drop-down menus.
  3. Download mission logs files and analyzes them.
  4. Configure APM settings for your airframe.
  5. Interface with a PC flight simulator to create a full hardware-in-the-loop UAV simulator.
  6. See the output from APM’s serial terminal.

Features :

  1. Straight Needle
  2. Arduino Compatible
  3. Onboard 4 MegaByte Dataflash chip for automatic data logging.
  4. Optional off-board GPS, a uBlox LEA-6H module with Compass.
  5. One of the first open-source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
  6. Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
  7. Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.

Package Includes :

1 x APM 2.8 Multicopter Flight Controller.

2 x Connecting Wires.

SKU: 28963 Category:
Power supply

LP2985-3.3.

Port

MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).

Input Voltage (V)

12~16 VDC

Sensors

3-Axis Gyrometer, Accelerometer, High-performance Barometer

Processor

ATMEGA2560 and ATMEGA32U-2

Micro-SD Card Slot

No

Dimensions in mm (LxWxH)

70 x 45 x 15

Weight (g):

82

Shipping Weight 0.085 kg
Shipping Dimensions 9 × 3 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 16 reviews

4.6 overall
10
5
1
0
0

Add a review

  1. Sunil Yadav (verified owner)

    good flight controller

    Sunil Yadav

  2. Sunil Yadav (verified owner)

    flight controller good price 4940

    Sunil Yadav

  3. Thavamani Thavamani

    nice but heigh value

    Thavamani Thavamani

  4. sp37610 (verified owner)

    good product in low price
    stable flight

    sp37610

  5. Ravi kumar (verified owner)

    Excellent product and fast shipping
    Very good don’t hesitate to buy

    Ravi kumar

  6. Parveen Kumar (verified owner)

    Good flight controller for amateur aerial photography. So far i have tested position hold, altitude hold and RTL flight modes. Performed very well. Good value for money.

    Parveen Kumar

  7. DHIRENDRA MALLIK (verified owner)

    Good quality work very fine

    DHIRENDRA MALLIK

  8. [email protected]

    better stability performance

    [email protected]

  9. [email protected]

    this item is god quality and small I really like it

    [email protected]

  10. SUJEET KUMAR YADAV

    I have purchased this from ebay.in & after using it from 1 year I will say that it is trustworthy & very stable flight controller.

    SUJEET KUMAR YADAV

  11. [email protected] (verified owner)

    Open source flight controller. Easy to use & set up.

    [email protected]

  12. Sunjay Singh (verified owner)

    If you are making a quad or hexa, this is the controller for you, dont forget if your ESC have 5 volts on red wires, remove the JP1 it joins the power module and BEC circuits, if JP1 is in place and esc also powering 5v, you will fry the controller instantly, it comes with inbuilt compass as well! Happy flying

    Sunjay Singh

  13. Prashant Salian (verified owner)

    Although I have yet to check the APM using actual motors and ESCs, the initial calibration results returned positive. I am pretty sure it will remain the same in practice too.

    Prashant Salian

  14. Prashant (verified owner)

    Although I have yet to check the APM using actual motors and ESCs, the initial calibration results returned positive. I am pretty sure it will remain the same in practice too. Overall a very good product!

    Prashant

  15. [email protected] (verified owner)

    I am not sure this APM is original or copy. But it is reasonable.

    [email protected]

  16. Vishal Mehra (verified owner)

    Great product!

    Vishal Mehra

Calibrating APM 2.8 using Mission Planner

A step by step guide to calibrating APM 2.8...

Questions and answers of the customers

  1. 0 votes
    Q This controler operating voltage answer now
    Asked by mdjaeem720 on December 27, 2023 4:38 pm
    A

    Operating voltage is 12-16VDC

  2. 0 votes
    Q Do you know where did i found datasheet of APM 2.8 ??? "any website" answer now
    Asked by nrgkiller444 on September 28, 2023 7:19 pm
    A

    Hello, for your query related to the datasheet ... Read more

  3. 0 votes
    Q Is it still supported by Ardupilot? answer now
    Asked by regamsoy2096 on September 8, 2023 5:07 pm
    A

    Yes

  4. 0 votes
    A

    You can refer to this video https://www.youtube... Read more

  5. 1 vote
    A you have to calibrate compass
  6. 1 vote
    Q do is prearm : need 3d fix
    Asked by moin02304 on January 9, 2020 6:02 pm
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…