SmartElex
Showing 49–93 of 93 results
-
Robot Kits and Parts
SmartElex Wireless Remote Control L293D Motor Driver
SKU: 593215- Remote (Transmitter) side(Input Voltage) :Â 9V battery
- Receiver(Motor driver) side(Input Voltage) : 12Vdc
- On-Board 9v battery socket on the remote sideboard
- Maximum Current:Â 1 Amp Per Channel
- Number of Channel:Â 4
- Antenna Gain (peak): 2Dbi
SKU: 593215 -
AVR Microcontroller Board
SmartElex ATmega2560 Development Board
SKU: 245283- Microcontroller: ATMEGA2560 with 16 MHz crystal with On-Board USBASP Programmer.
- Power: 7 to 15 VDC with Reverse Polarity Protection.
- 2.4GHz ZigBee (XBee) wireless module adaptor
- 2×16 Character Alphanumeric LCD.
- SD card Holder.
- CH340G USB to Serial converter.
- ESP8255 Adaptor interface with USB to Serial Converter.
SKU: 245283 -
-
Movement Sensors
SmartElex 6 Degrees of Freedom Breakout – LSM6DSO
SKU: R101054- Accelerometer measurement range: ±2/±4/±8/±16 g full scale
- Gyro measurement range: ±125/±250/±500/±1000/±2000 dps full scale
- Embedded temperature sensor: 16-bit resolution
- Operating voltage range: 1.71V to 3.6V / Typically 3.3V
SKU: R101054 -
-
Battery Chargers, Battery Charging Boards
SmartElex 2s 18650 Li-Ion Battery Charger
SKU: 611924- Input Voltage: 5V.
- Max Input Voltage: – 6V
- Input Interface: Micro USB port/ DC jack.
- Charge Current: up to 1A / 2A.
- A full charge voltage: 4.2V.
- Over-Voltage Detection Feature: Yes.
- Under-Voltage Detection Feature: Yes.
- Charging indicator LED: Charging / Full charge/ Battery detects.
- Charging through Micro-USB: YES
- On- Board 18650 cell socket: – Yes.
SKU: 611924 -
IR Sensors
SmartElex Proximity Sensor Breakout – 20cm, VCNL4040
SKU: R101041- Model: VCNL4040
- Qualitative Detection Range: 20cm
- Integrated Modules: Infrared Emitter (IRED), Ambient Light Sensor (ALS), Proximity Sensor (PS)
- Operates ALS and PS in Parallel Structure
- Operating Voltage: 3.3V
- I2C Address: 0x60
SKU: R101041 -
-
-
Current Sensors
SmartElex Current Sensor Breakout – ACS723 (Low Current)
SKU: R101038- DC and AC currents : 10mA up to 5A
- Full electrical isolation of measured and sensed circuits
- The version without the op-amp has a base sensitivity of 400mV/A
- Adjustable sensitivity with on-board amplifier, gain from 2.2 to 22 V/V
SKU: R101038 -
IR and RF Transmitters and Receivers
SmartElex Wireless Remote Control with NRF Transceiver and Motor Driver
IR and RF Transmitters and ReceiversSmartElex Wireless Remote Control with NRF Transceiver and Motor Driver
SKU: R1231941. Transmitter & Receiver comes Pre-Bind.
2. It uses 2.4GHz global open ISM band, with license-free.
3. Operating Range: 1Km.
4. Antenna Gain (peak): 2Dbi.
5. Transmit power is greater than +20 dBm.
Receiver:
1. Output current: 1.2 A continuous (2 A peak) per motor.
2. Under-voltage lockout and protection against over-current and over-temperature.SKU: R123194 -
-
Brushed / Brushless DC motor Driver
SmartElex – Industrial Grade 15D Motor Driver
SKU: R100171- Support motor voltage from 7V to 28V.Â
- Independent direction and speed control Â
- Onboard Low, Internal resistance MOSFETs are switched at 16 KHz frequency.Â
- Overcurrent and Thermal protection.Â
SKU: R100171 -
Movement Sensors
SmartElex Triple Axis Accelerometer Breakout – BMA400
SKU: R101057- Supply voltage range: 1.72 – 3.6V
- Ultra-Low current consumption: < 14.5µA at highest
- performance settings: I2C interface, SPI interface (disabled by default)
- I2C addresses: 0x14 (Default), 0x15
- Selectable acceleration ranges: o ±2/±4/±8/±16g
SKU: R101057