![WAVESHARE](https://robu.in/wp-content/uploads/2022/07/waveshare.jpg)
WAVESHARE
Showing 385–432 of 547 results
-
Raspberry Pi Camera
Waveshare OV9281-120 Mono Camera for Raspberry Pi, Global Shutter, 1MP
SKU: 1254990- Sensor: OV9281
- CMOS size: 1/4 inch
- Camera type: mono
- Pixels: 1MP (1280 × 800)
- Optical Size: 1/4 inch
- Focusing Range: 65mm ~ infinite
- IR Sensitive: Visible light only, build-in 650nm IR cut filter
SKU: 1254990 -
-
-
-
USB Interface Module
Waveshare PCIe To M.2 Adapter Board (C) for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing
USB Interface ModuleWaveshare PCIe To M.2 Adapter Board (C) for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing
SKU: R112128- Compatible With 2230 / 2242 / 2260 / 2280 Size M.2 Solid State Drive
- Supports Gen2 and Gen3 Modes,
- Supports Booting PI5 From Solid State Drive
SKU: R112128 -
Raspberry Pi Hats
Waveshare PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard
Raspberry Pi HatsWaveshare PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard
SKU: R101208- Enables NVMe SSD compatibility for Raspberry Pi 5 with PCIe to M.2 M key adapter board.
- Supports M.2 drives in 2230/2242 sizes and PCIe×1 Gen2/Gen3 modes.
- Exclusive compatibility with Raspberry Pi 5B model.
Features onboard indicator lights for clear operational status. - HAT+ design with EEPROM chip ensures seamless integration.
- Equipped with a power monitoring chip and airflow vent for optimized SSD performance.
SKU: R101208 -
USB Interface Module
Waveshare PCIe TO M.2 Adapter, Supports Raspberry Pi Compute Module 4
SKU: 1051941- Adapter For NVMe Protocol M.2 SSD, Faster Reading/Writing, Improving Efficiency
- Supports Base Boards With PCI-E×1 / ×4 / ×8 / ×16 Socket
- Supports Raspberry Pi Compute Module 4
- Compatible With Different Sizes Of M.2 SSD
- Slot Support-M Key(notch on the top right)
SKU: 1051941 -
USB Interface Module
Waveshare PCIe TO USB 3.2 Gen1 Adapter, for Raspberry Pi Compute Module 4 IO Board, 4x HS USB
USB Interface ModuleWaveshare PCIe TO USB 3.2 Gen1 Adapter, for Raspberry Pi Compute Module 4 IO Board, 4x HS USB
SKU: 1051942- 4x USB 3.2 Gen1 ports, USB 3.0 / 2.0 / 1.1 compatible
- Flexible power supply options: powered from either PCIe 12V, OR from 12V DC header
- Onboard VL805 chip, driver-free, plug and play
SKU: 1051942 -
-
Raspberry Pi Hats
Waveshare Pico-RTC-DS3231 IC Test Board
SKU: 979552- Operating voltage: 3.3V
- Backup battery voltage: 2.3V~5.5V
- Operating temperature: -40°C ~ 86°C
- Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year
- Optional format: 24-hour OR 12-hour with an AM/PM indicator
- 2x programable alarm clock
SKU: 979552 -
Raspberry Pi Hats
Waveshare Pioneer600 Raspberry Pi Expansion Board
SKU: 968484- Onboard CP2102: USB TO UART converter
- 0.96-Inch OLED Display
- PCF8591 : 8-bit AD/DA converter, I2C interface
- BMP180: pressure sensor, I2C interface
- PCF8574: I/O expansion chip, I2C interface
- DS3231: high precision RTC chip, I2C interface
- LFN0038K IR receiver
SKU: 968484 -
Raspberry Pi Hats
Waveshare Pioneer600, Raspberry Pi Expansion Board
SKU: 975819- AD/DA IO interface : screw terminal
- 1-WIRE interface : for connecting 1-WIRE devices like DS18B20
- Sensor interface : for connecting various sensors
- 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface
- Buzzer
- CP2102 : USB TO UART converter
- PCF8591 : 8-bit AD/DA converter, I2C interface
SKU: 975819 -
-
-
-
Raspberry Pi Hats
Waveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
Raspberry Pi HatsWaveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
SKU: 1300107- POWER INPUT: 7-36V
- STORAGE: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
- FAN: allows speed adjustment and measurement, 5V / 12V
- INDICATOR: M.2 status LED
- CM4: status LED
SKU: 1300107 -
-
Raspberry Pi Hats
Waveshare Power over Ethernet HAT (E) for Raspberry Pi
SKU: 1486412- Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
- PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
- Fully isolated switched-mode power supply (SMPS)
- Smaller and more flexible with a more compact component layout
SKU: 1486412 -
RTC Module
Waveshare Precision RTC Module for Raspberry Pi Pico, Onboard DS3231 Chip
SKU: 968485- Operating voltage: 3.3V
- Backup battery voltage: 2.3V~5.5V
- Power consumption: 100nA(sustains data and clock information)
- DS3231 high precision RTC chip, I2C bus
- RTC backup battery supports CR1220 button cell
SKU: 968485 -
IoT Development Boards
Waveshare R7FA4 PLUS A Development Board, Based on R7FA4M1AB3CFM, Compatible with Arduino UNO R4 Minima
IoT Development BoardsWaveshare R7FA4 PLUS A Development Board, Based on R7FA4M1AB3CFM, Compatible with Arduino UNO R4 Minima
SKU: R101199- Based on R7FA4M1AB3CFM, and is compatible with Arduino UNO R4 Minima.
- Utilizes Renesas Electronics’ RA4M1 (Arm® Cortex®-M4) microcontroller, with a main frequency of 48MHz.
- Equipped with 256 kB Flash and 32 kB RAM, the expanded memory can easily handle complex projects.
SKU: R101199 -
IoT Development Boards
Waveshare R7FA4 PLUS B Development Board, Compatible with Arduino UNO R4 WiFi
SKU: R101198- Renesas RA4M1 MCU + Espressif ESP32-S3.
- 12×8 LED matrix, Qwiic connectors, VRTC.
- Works with Arduino UNO R4 Minima.
- 256 kB Flash, 32 kB RAM, 12-bit DAC, CAN bus.
- USB-C or VIN (6V<=VIN<=21V) input options.
SKU: R101198 -
Raspberry Pi Hats
Waveshare R800C GSM/GPRS HAT For Raspberry Pi
SKU: 1486413- Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
- UART interface, for connecting controller boards like Arduino/STM32
- Onboard voltage translator, 3.3V by default, switch to 5V via jumper
- 2x LED indicators, easy to monitor the working status
- SIM card slot, supports 1.8V/3V SIM card
SKU: 1486413 -
USB Interface Module
Waveshare Rail-Mount Serial Server RS232/485/422 to RJ45 Ethernet Module TCP/IP to serial With POE Function
USB Interface ModuleWaveshare Rail-Mount Serial Server RS232/485/422 to RJ45 Ethernet Module TCP/IP to serial With POE Function
SKU: 1486415- Model RS232/485/422 TO POE ETH (B)
- Product type Serial server, Modbus gateway, MQTT gateway
- Primary function RS232/485/422 to Ethernet
- Communication interface RS232/485/422 × 1, Ethernet port × 1
- Power supply Screw terminal DC 6~36V or PoE network port
- Isolation protection Power isolation, signal isolation protection
SKU: 1486415 -
USB Interface Module
Waveshare Rail-Mount Serial Server, RS485 to WIFI/Ethernet Module, Modbus MQTT Gateway
USB Interface ModuleWaveshare Rail-Mount Serial Server, RS485 to WIFI/Ethernet Module, Modbus MQTT Gateway
SKU: 1323455- Brand: Waveshare
- Run voltage: DC 5-36V
- Wireless standard: 802.11 b/g/n
- Frequency range: 2.412 GHz-2 .484 GHz
- Support RS485 to Wifi/ Ethernet communication.
- Rich indicator LED: Power, link, RXD, TXD.
SKU: 1323455 -
USB Interface Module
Waveshare Rail-mount TTL To RS422 Galvanic isolated Converter, Anti-surge, Multiple Isolation Protection
USB Interface ModuleWaveshare Rail-mount TTL To RS422 Galvanic isolated Converter, Anti-surge, Multiple Isolation Protection
SKU: 1486417- Product Type: Galvanic isolated TTL to RS422 converter
- Power supply: 3.3V ~ 5V
- Protection: over-voltage, reverse-proof
- Device Port: TTL/RS422 standard compatible
SKU: 1486417 -
Raspberry Pi Displays
Waveshare Raspberry Pi 2.8inch LCD expansion module, 240 × 320 resistive touch screen for Raspberry Pi Zero / Zero 2 W Series boards, Works with other POD modules
Raspberry Pi DisplaysWaveshare Raspberry Pi 2.8inch LCD expansion module, 240 × 320 resistive touch screen for Raspberry Pi Zero / Zero 2 W Series boards, Works with other POD modules
SKU: 1552785- 2.8inch Resistive Touch Display, 240×320 Resolution
- 4x User Buttons And 40PIN Header
- Easily combined with other POD series modules to expand more functions
-
Easy to use & install
-
Good quality product
SKU: 1552785 -
Electronic Modules
Waveshare Raspberry Pi Zero HDMI USB Module + Zero POD Case
SKU: 1552786- HDMI-USB HUB Module: Expands 2x USB2.0 port, converts Mini HDMI port to standard HDMI port
- Zero POD case: Three-part structure design (aluminum alloy case + ABS top and bottom covers)
- Suitable for other Zero series boards.
SKU: 1552786