Latest Brands
Latest Products
-
Brushed / Brushless DC motor Driver
SURPASS HOBBY C5065 14pole Outrunner Brushless Moror for Fixed Wing AircraftΦ6.0*23mm 4.0mm Connector (335 KV)
Brushed / Brushless DC motor DriverSURPASS HOBBY C5065 14pole Outrunner Brushless Moror for Fixed Wing AircraftΦ6.0*23mm 4.0mm Connector (335 KV)
SKU: R100908- Model: Surpass Hobby C5055
- Pole Count: 14
- Type: Outrunner Brushless Motor
- Diameter: 6.0mm
- Length: 23mm
- Connector: 4.0mm
- KV Rating: 535KV
SKU: R100908 -
Brushed / Brushless DC motor Driver
SURPASS HOBBY C5065 14pole Outrunner Brushless Moror for Fixed Wing AircraftΦ6.0*23mm 4.0mm Connector (435 KV)
Brushed / Brushless DC motor DriverSURPASS HOBBY C5065 14pole Outrunner Brushless Moror for Fixed Wing AircraftΦ6.0*23mm 4.0mm Connector (435 KV)
SKU: R100907- Model: Surpass Hobby C5055
- Pole Count: 14
- Type: Outrunner Brushless Motor
- Diameter: 6.0mm
- Length: 23mm
- Connector: 4.0mm
- KV Rating: 535KV
SKU: R100907 -
IoT Development Boards
Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT
SKU: R111303- Processor: ESP32-S3 Dual Core 240MHz Tensilica processor
- Memory: 4MB Flash, 512KB SRAM, 2MB PSRAM
- Connectivity: WiFi, Bluetooth Low Energy (BLE)
- USB: Native USB support
- GPIO Pins: 13 GPIO pins (11 on breakout pads, 2 on QT connector)
SKU: R111303 -
-
-
-
Sensor ICs, Temperature & Humidity Sensor
Adafruit SHT41 Trinkey – USB Temperature and Humidity Sensor
Sensor ICs, Temperature & Humidity SensorAdafruit SHT41 Trinkey – USB Temperature and Humidity Sensor
SKU: R111309- ATSAMD21E18 Microcontroller.
- 32-bit Cortex M0+ processor.
- 256KB Flash and 32 KB RAM.
- Relative humidity accuracy: up to ±1.8 %RH.
- Temperature accuracy: up to ±0.2 °C.
- Operating range: 0…100 %RH, -40…125 °C.
SKU: R111309 -
Breakout Board
Adafruit BNO055 + BMP280 BFF Add-On for QT Py
SKU: R111304- Sensor Data Output (BMP280):
- Barometric Pressure: ±1 hPa absolute accuracy
- Temperature: ±1.0°C accuracy
- Communication Interface: I2C
- Optional Pins (BNO055):
Interrupt/Reset Pins: Available for advanced control - Address Configuration:
Address-changing jumpers: Available for both sensors
BMP280 Default Address: 0x77
BNO055 Default Address: 0x28
SKU: R111304 -
PIR / IR and Optical Sensor
Adafruit Infrared IR Remote Receiver – STEMMA JST PH 2mm
SKU: R111305- Communication Interface: Pulse-input reading capabilities required on the microcontroller
- Power Supply: 3~5VDC
- Receiver Frequency: 38KHz
- LED Indicators: Green ‘power good’ LED and red ‘signal’ LED
SKU: R111305 -
-
IoT Development Boards
WeAct Studio STM32F103C8T6 Bluepill Plus ARM STM32 Minimum System Development Board Module
IoT Development BoardsWeAct Studio STM32F103C8T6 Bluepill Plus ARM STM32 Minimum System Development Board Module
SKU: R110778- Maximum Frequency: 72 MHz
- Performance: 1.25 DMIPS/MHz (Dhrystone 2.1) at 0 wait state memory access.
- Flash Memory: 128 Kbytes
- SRAM: 20 Kbytes
- System Crystal: 8 MHz
- RTC Crystal: 32.768 KHz
SKU: R110778 -
-
IoT Development Boards
WeAct Studio ESP32-S3-DevKitC-1 ESP32-S3 WiFi Bluetooth-compatible BLE 5.0 Mesh Development Board ESP32 Wireless Module Micropython
IoT Development BoardsWeAct Studio ESP32-S3-DevKitC-1 ESP32-S3 WiFi Bluetooth-compatible BLE 5.0 Mesh Development Board ESP32 Wireless Module Micropython
SKU: R110796- 802.11b/g/n, 1T1R mode, data rate up to 150Mbps.
- Bluetooth 5.0, Bluetooth-compatible mesh, supported data rates: 125Kbps, 500Kbps, 1Mbps, 2Mbps.
- Processor: Xtensa-R 32-bit LX7 dual-core processor, clock frequency support up to 240MHz.
- Memory: 512KB SRAM, 384KB ROM, 16KB RTC SRAM
SKU: R110796 -
IoT Development Boards
WeAct Studio STM32C011F6P6 Core Demo Board
SKU: R110773- Arm® Cortex®-M0+ CPU up to 48 MHz
- Up to 32 Kbytes flash memory with protection
- 6 Kbytes SRAM with hardware parity check
- 12-bit ADC with up to 15 channels, 2.5 MSps
- Wide communication support: I2C, SPI/I2S, USARTs
- Low-power operation: -40°C to 125°C, 2.0 V to 3.6 V, low-power modes
SKU: R110773 -
IoT and Wireless, IoT Development Boards
WeAct Studio Learning Board Demo Board Ardiuno AT32F403ACGU7 BlackPill Core
IoT and Wireless, IoT Development BoardsWeAct Studio Learning Board Demo Board Ardiuno AT32F403ACGU7 BlackPill Core
SKU: R110783- CPU: AT32F403ACGU7
- Operating Frequency: 240MHz
- Memory: 256KB Flash, 768KB ROM, 96KB SRAM, 128KB RAM
- Clock: 8MHz high-speed crystal oscillator, 32.768KHz low-speed crystal oscillator
- Power Supply: 3.3V-5V
SKU: R110783