Search results: “e-bike pinion” – Page 148
Showing 7057–7104 of 8384 results
-
USB Interface Module
TTGO T-Internet-POE ESP32-WROOM LAN8720A Chip Ethernet Adapter
SKU: 1031132- Chipset: ESPRESSIF-ESP32-WROOM, LAN8720A Ethernet chip, SI3404 Power management chip
- FLASH:4MB
- SRAM:520kB SRAM
- It has a type-c USB.
- Support cloud server development /SDK for user firmware development.
SKU: 1031132 -
IoT Cameras
TTGO OV2640 1.3 Inch T-Camera Plus Fish-eye Lens Rear Camera Module with MPU6050
SKU: 1031129- Chipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash/SRAM, up to 4 x 16 MB
- SRAM:520 kB SRAM + 8MBytes External SPRAM
- KEY: reset
- display: IPS Panel ST7789/1.3 Inch
- Power indicator lamp: red
- USB to TTL: CP2104
- Camera: OV2640 2Megapixel
- on-board clock:40MHz crystal oscillator
SKU: 1031129 -
IoT Cameras
TTGO T-Camera Plus Camera Module OV2640 1.3 Inch Display Rear Camera Fish-eye Lens Rear Camera
IoT CamerasTTGO T-Camera Plus Camera Module OV2640 1.3 Inch Display Rear Camera Fish-eye Lens Rear Camera
SKU: 1031128- Chipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6
- FLASH: QSPI flash/SRAM, up to 4 x 16 MB
- SRAM:520 kB SRAM + 8MBytes External SPRAM
- KEY: reset
- display: IPS Panel ST7789/1.3 Inch
- Power indicator lamp: red
- USB to TTL: CP2104
- Camera: OV2640 2Megapixel
SKU: 1031128 -
-
Workbench Tools
Screwdriver Set, 52 in 1 Screwdriver Set with 42 Bits, Multi-function Magnetic Repair Computer Tool Kit For Rapair Jewelry, Eyeglass, PC, Laptops, Smartphone, Watches – RED | B084F9Z8S2 ( JM-8100 )
Workbench ToolsScrewdriver Set, 52 in 1 Screwdriver Set with 42 Bits, Multi-function Magnetic Repair Computer Tool Kit For Rapair Jewelry, Eyeglass, PC, Laptops, Smartphone, Watches – RED | B084F9Z8S2 ( JM-8100 )
SKU: 972456- 42 Interchangeable Bits
- Multi-Function Magnetic Handle
- Wide Range of Applications
- Compact and Portable
SKU: 972456 -
TFT LCD Displays
reTerminal – Embedded Linux with Raspberry Pi CM4 and 5-Inch Capacitive Multi-Touch Screen
TFT LCD DisplaysreTerminal – Embedded Linux with Raspberry Pi CM4 and 5-Inch Capacitive Multi-Touch Screen
SKU: 962315- 5-Inch IPS capacitive multi-touch screen.
- Cryptographic co-processor with secure hardware-based key storage.
- High-speed expansion interface with a PCIe 1-lane Host, Gen 2 (5Gbps), USB 2.0 port, 28 GPIOs, and PoE.
- Supports video output at 5K resolution
SKU: 962315 -
Arducam Cameras and Accessories
Arducam 5mm Focal C-Mount Lens for Raspberry Pi High Quality Camera with Manual Focus and Adjustable Aperture
Arducam Cameras and AccessoriesArducam 5mm Focal C-Mount Lens for Raspberry Pi High Quality Camera with Manual Focus and Adjustable Aperture
SKU: 945448- Brand: Arducam
- Product: Arducam 5mm Focal C-Mount Lens for Raspberry Pi
- Optical Format: 1/1.7
- Focal length: 5mm
- Aperture: F1.6
- Focus Type: Manual
SKU: 945448 -
-
Raspberry Pi Accessories
EP-N8508GS Mini USB Wireless Network Card 150Mbps Wifi Dongle
SKU: 699538- Operating distance of up to 300 feet indoor, and up to 900 feet in open space
- Data transfer rate of up to 150Mbps (downlink) and 150Mbps (uplink)
- Supports Ad Hoc and Infrastructure modes
- Supports IEEE 802.11e standard
SKU: 699538 -
Raspberry Pi Accessories
SanDisk Micro SD/SDHC 16GB Class 10 Memory Card with Adapter (Upto 98MB/s Speed)
Raspberry Pi AccessoriesSanDisk Micro SD/SDHC 16GB Class 10 Memory Card with Adapter (Upto 98MB/s Speed)
SKU: 683038- Memory Size: 16 Gigabyte
- Card Type: Micro SDHC UHS-I Card with Adapter
- Speed: up to 98MB/s
- Class: 10
- High-speed Card can be used for both Mobile phone and Raspberry Pi
We have discontinued this memory card, Please consider SKU: 303315 ⇐Click here
SKU: 683038 -
FPV Cameras
RunCam Swift 2 600TVL FPV Camera Integrated OSD 2.3mm Lens
SKU: 674102- The lightest FPV HD camera
- Support WiFi transmission, IOS, and Android APP
- Better Button Structure, New Touch Feeling
- Anti-interference PCB can effectively reduce RF interference.
- The bottom door keeps the micro SD card from popping out in a crash.
SKU: 674102 -
-
Carbon Fiber Tubes and Rods
3K Roll-wrapped Carbon Fibre Tube (Hollow) 14mm(OD) * 12mm(ID) * 1000mm(L)
Carbon Fiber Tubes and Rods3K Roll-wrapped Carbon Fibre Tube (Hollow) 14mm(OD) * 12mm(ID) * 1000mm(L)
SKU: 653499- Made of Carbon Fiber material
- High Strength
- Stable dimension and UV resistant
- High Corrosion Resistance
- High Thermal Conductivity in some forms
- Low coefficient of thermal expansion
- Non-poisonous
SKU: 653499 -
Relay Modules
5V 2 Channel Relay Module
SKU: 618458- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red).
- Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.
SKU: 618458 -
Official Raspberry Pi Kits
Raspberry Pi 3 Model B+ Starter Kit
SKU: 268128- Pack contains quality products
- All products are tested and ready to perform
- All essentials to start with Raspberry Pi are Included in this Starter Combo
- Read the description below for more information
Due to Limited Stock availability, we have restricted this product to 1 Quantity per order..!
SKU: 268128 -
-
GPS Modules
GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
SKU: 139684This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.
SKU: 139684 -
IoT Development Boards
GAPUINO GAP8 Developer Kit with RISC-V Processor
SKU: 921007- Fabric controller core: 16 kB data and 1 KB instruction cache.
- Cluster: 64 kB shared data and 4 kB shared instruction cache.
- All cores support the same extended RISC-V ISA. Extended instructions include SIMD vector, DSP, bit manipulation, etc.
- Multi-channel 1D/2D DMA.
- Specialized multi-channel micro DMA for autonomous peripheral support.
- Programmable Voltage Regulator.
- Real-Time Clock.
SKU: 921007 -
-
Carbon Fiber Tubes and Rods
Pultruded Square Inner round Carbon Fiber Hollow Tube 4*4mm(OD) * 3mm(ID) * 200mm(L)
Carbon Fiber Tubes and RodsPultruded Square Inner round Carbon Fiber Hollow Tube 4*4mm(OD) * 3mm(ID) * 200mm(L)
SKU: 894426- Made of Carbon Fiber material
- High Strength
- Stable dimension and UV resistant
- High Corrosion Resistance
- High Thermal Conductivity in some forms
- Low coefficient of thermal expansion
- Non-poisonous
SKU: 894426 -
-
Sensor Kits
SeeedStudio Grove Creator Kit – Alpha (20 in 1 Sensor Kit)
SKU: 605383- Carefully selected Grove sensors (input) and actuators (output)
- 20 different Grove modules in a kit
- All modules are packed in protective plastic bags
- Grove connector cables
- Compatible with:
i) Arduino, requires Grove Base Shield
ii) Raspberry Pi, requires GrovePi HAT
iii) micro:bit, requires BitMaker or BitMaker Lite
SKU: 605383 -
-
-
Buck Converter
LM2596 HV DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
SKU: 520422- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
SKU: 520422 -
-
-
-
PIC Development board
40 pins PIC Start-Up Kit Combo 1 – SK40C PIC16F877A (SK40C1)
SKU: 10097-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
SKU: 10097 -
-
-
Stepper Motor Drivers
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
Stepper Motor DriversMACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
SKU: 18988- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
SKU: 18988 -
Digital Multimeters and Clampmeter
Extech EX310 9 Function Mini MultiMeter + Non-Contact Voltage Detector
Digital Multimeters and ClampmeterExtech EX310 9 Function Mini MultiMeter + Non-Contact Voltage Detector
SKU: 830289- Brand: Extech
- Model Number: EX310
- Built-in non-contact AC voltage detector (NCV)
- 2000 count manually ranging multimeter measures AC/DC voltage and current and resistance
- Cat III – 600V UL listed
- Batter test function (1.5V and 9V)
- Rubber holster protects meter
SKU: 830289 -
Audio Amplifier Module
XH-M422 TPA3116D2 Bluetooth Amplifier Board U disk TF Player Amp Boards Dual Channels 2*50W DC12V-24V
Audio Amplifier ModuleXH-M422 TPA3116D2 Bluetooth Amplifier Board U disk TF Player Amp Boards Dual Channels 2*50W DC12V-24V
SKU: 815896- Original TPA3116D2 core technology
- Easy Plug and Play Operation
- Onboard Bluetooth
- Dynamic operating Voltage Range: 12 to 24V
- High fidelity Dual 100W output.
SKU: 815896