Motors | Drivers | Pumps | Actuators
Showing 241–288 of 1624 results
-
-
Futaba servo cable
SafeConnect Twisted 30CM 22AWG Servo Lead Extension (Futaba) Cable
SKU: 248839- High-Quality cable
- One male and one female connector.
- Twisted 30cm Servo Lead Extention (Futaba) with hook
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
SKU: 248839 -
Brushed / Brushless DC motor Driver
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
SKU: 699566- Motor Power Range: 4.5V ~ 36V
- Control supply range: 4.5V ~ 9V
- Logical operating current Iss: ≤60mA
- Driving part of the work current Io: ≤1.2A
- Maximum power dissipation: 4W (T = 90 ℃)
- Operating temperature : -25 ℃ ~ + 125 ℃
- Drive Type: Dual high-power H-bridge driver
SKU: 699566 -
Brushed / Brushless DC motor Driver
Dual Monster Moto Shield VNH3ASP30 DC Motor Driver 2x14A (Peak 30A)
Brushed / Brushless DC motor DriverDual Monster Moto Shield VNH3ASP30 DC Motor Driver 2x14A (Peak 30A)
SKU: 28535- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
SKU: 28535 -
-
-
Plastic Gear Box Motor
DC Motor 3RPM 12Volts
SKU: 2143- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 3 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 16
- Stall Torque(kg-cm): 60
SKU: 2143 -
N20 Metal Gear Motors
N20-3V-15 RPM Micro Metal Gear-box DC Motor
SKU: 475044- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475044 -
Plastic Gear Box Motor
DC Motor – 10RPM – 12Volts
SKU: 5643- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 7
- Stall Torque(kg-cm): 28
SKU: 5643 -
Cooling Fans
Small 5V 0.14A Turbo Air Intake Fan (Size: 40x40x20mm)
SKU: 1226458- Operating Voltage: 5V DC
- Operating Current: 140mA
- Normal Operating Temperature: 25°C-45°C.
- Weight: 26 gm.
- Life Expectancy: Dual Ball Bearing: 50000 hours.
- Sleeve Bearing: 20000-25000 hours.
- Reliable quality as well as Competitive price.
- Large volume flow and long life expectancy.
- High speed and large air flow.
- Low noise and high efficiency.
SKU: 1226458 -
Solenoids and Electromagnets
DC 12V KK-P40/25 35KG Lifting Solenoid Electromagnet
SKU: 130282- Operating Voltage: 12V DC
- Lifting Capacity: 35KG
- Size (D x L): 40 x 25 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 130282 -
-
N20 Metal Gear Motors
N20-6V-200 RPM Micro Metal Gear-box DC Motor
SKU: 75011- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 75011 -
-
Solenoids and Electromagnets
DC 24V P40/20 30KG Lifting Solenoid Electromagnet
SKU: 890210- Operating Voltage: 24V DC
- Lifting Capacity: 30KG
- Size (D x L): 40 x 20mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 890210 -
Solenoids and Electromagnets
DC 12V Solenoid Valve 1/4″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
Solenoids and ElectromagnetsDC 12V Solenoid Valve 1/4″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
SKU: 975725- Valve Type: 2 Way Normally Open
- Port Size: 1/4″ BSP Female Port
- Coil Voltage: DC12V
- Flow Model: Uni-Directional
- Flow Rate: 0.23Cv (Fluid Flow)
- Response Time: Less than 50 ms
- Operating Pressure: 1.2Mpa
SKU: 975725 -
Brushed / Brushless DC motor Driver
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
Brushed / Brushless DC motor DriverMini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
SKU: 130220- New L293D motor shield, the input voltage DC4.5-25V
- 600mA output current capability per channel
- 1.2A peak output current(non-repetitive) per channel
- Enable facility
- Overtemperature protection
- Logical “0” input voltage up to 1.5V(High noise immunity)
SKU: 130220 -
-
-
Plastic Gear Box Motor
DC Motor – 60RPM – 12Volts
SKU: 5663- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 60 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 3.6
- Stall Torque(kg-cm): 15
SKU: 5663 -
-
-
N20 Metal Gear Motors
N20-6V-100 RPM Micro Metal Gear-box DC Motor
SKU: 74986- Voltage range:3-6V
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 74986 -
-
Cytron Motor Drivers
Cytron Smart Drive Mdds30 Dual 30A (80A Peak)
SKU: 29672- Battery low voltage indicator.
- Battery over voltage indicator.
- Thermal protection.
- Current limit protection.
- Bi-directional control for dual brushed DC motor.
- Support motor voltage from 7V to 35VDC.
- Dimension: 103 x 97 x 40 (LxWxH) mm.
SKU: 29672 -
Cytron Motor Drivers
Cytron 20Amp 6V-30V DC Motor Driver MD20A
SKU: 381393- Bidirectional control for one brushed DC motor.
- Operating Voltage: DC 6V to 30V
- Maximum Motor Current: 20A continuous, 60A peak
- Buttons for quick testing.
- LEDs for motor output state.
- Overcurrent protection with active current limiting.
- Temperature protection.
- Undervoltage shutdown.
SKU: 381393 -
-
-
-