IoT Development Boards
Showing 97–144 of 245 results
-
-
-
-
IoT Development Boards
Espressif ESP32-PICO-KIT Development board
SKU: 1696732- On- Board Chip: ESP32
- Microcontroller Unit (MCU): Xtensa LX6 CPU architecture
- LDO: 5V-to-3.3V Low dropout voltage regulator (LDO)
- USB-to-UART bridge: CP2102N, single-chip USB-to-UART bridge that offers up to 3 Mbps transfers rates
SKU: 1696732 -
-
-
IoT Development Boards
Matrix Voice IoT Development Platform with ESP32 Wireless Module
SKU: 712428- Xilinx Spartan 6 XC6SLX9 FPGA
- 7 x MEMSMP34DB02 audio sensor digital microphone array
- 18 x RGBW LEDs
- 64MByte 132MHZ SDRAM
- 64Mbit Flash Memory
- Wifi 2.4Ghz 802.11bgn – BT 4.0 LE
- Tensilica Xtensa dual-core 32-bit LX6 microcontroller
SKU: 712428 -
-
IoT Development Boards
M5Stack AtomU ESP32 Development Kit with USB-A
SKU: 1223440- product: Development Kit with USB-A
- Model: ESP32
- ESP32-PICO-D4:Â 240MHz dual core, 600 DMIPS, 520KB SRAM, 2.4G Wi-Fi
- Support PDM clock frequency 1.0 ~ 3.25MHz
- Standby working current 40.4mA
- Product size:Â 52 x 20 x 10mm
SKU: 1223440 -
-
IoT Development Boards
5V Wireless DMX512 2.4G Receiver Transmitter PCB Module Board for Stage Lighting
IoT Development Boards5V Wireless DMX512 2.4G Receiver Transmitter PCB Module Board for Stage Lighting
SKU: 1794196- Model Number: Wireless DMX512 PCB Module
- Input voltage: 5VDC
- Work frequency section: 2.4GHz ISM band, 126 channels frequency section
- Max transmitting power rate: 20dBm
- Receiver sensitive: -94dBm
SKU: 1794196 -
IoT Development Boards
NANO32 ESP32 IoT Development Board
SKU: 24473-
ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: 24473 -
-
-
-
-
IoT Development Boards
Sipeed MAIX-I module w/o WiFi ( 1st RISC-V 64 AI Module, K210 inside )
SKU: 755023- Up to 8 channels of audio input data, ie 4 stereo channels
- Simultaneous scanning pre-processing and beamforming for sound sources in up to 16 directions
- 16-bit wide internal audio signal processing
- Dual-core RISC-V 64bit IMAFDC, on-chip huge 8MB high-speed SRAM (not for XMR :D), 400MHz frequency
- Up to 192kHz sample rate
SKU: 755023 -
-
-
-
IoT Development Boards
Espressif ESP32-S3-Korvo-2 Development board
SKU: 1696741- On Board Chip: The ESP32-S3-WROOM-1 is a powerful, generic Wi-Fi + Bluetooth LE MCU module that is built around the ESP32-S3 series of SoCs
- Left Microphone: Onboard microphone connected to ADC.
- Audio ADC Chip: ES7210 is a high-performance, low-power 4-channel audio analog-to-digital converter for microphone
- Audio Codec Chip: The audio codec chip, ES8311, is a low-power mono audio codec
- Audio PA Chip: NS4150 is an EMI, 3 W mono Class D audio power amplifier
SKU: 1696741 -
IoT Development Boards
Sipeed BL808 M1s RISC-V Module with WIFI / BT for IoT Smart Home
SKU: 1488398- CPU RV64GCV 480MHz, RV32GCP 320MHz, RV32EMC 160MHz
- NPU BLAI-100
- Capacity 768KB SRAM + 64MB UHS PSRAM, MJPEG and H264(Baseline/Main)
- Encode and Decode ae 1920×1080@30fps + 640×480@30fps
- The camera interface is DVP and MIPI-CSI
SKU: 1488398 -
IoT Development Boards
TEXAS INSTRUMENTS LAUNCHXL-RM42 Development Board, RM42x, Hercules Launchpad, USB powered, on board XDS100v2 J-TAG emulator
IoT Development BoardsTEXAS INSTRUMENTS LAUNCHXL-RM42 Development Board, RM42x, Hercules Launchpad, USB powered, on board XDS100v2 J-TAG emulator
SKU: 1382846- Product: RM42 Development Board, RM42x, Hercules Launchpad
- USB powered
- On board USB XDS100v2 JTAG debug
- Onboard SCI to PC serial communication
SKU: 1382846 -
-
IoT Development Boards
Microsoft’s Azure Sphere MT3620 Starter Kit
SKU: 712414- On-board environmental sensors for light, temperature, and barometric pressure
- Interface for optional OLED 128×64 display
- USB Interface for power and data with a host computer
- User pushbutton switches and LEDs
- 5V to 3.3V power regulation
- Terminal footprints for external 5V DC and VBAT supplies
SKU: 712414 -
IoT Development Boards
Waveshare ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32
IoT Development BoardsWaveshare ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32
SKU: R107350- Model: ESP32-S3-NANO
- Microcontroller: ESP32-S3R8 (Dual-core 32-bit Xtensa LX7)
- Wireless Communication: 2.4GHz WiFi + Bluetooth LE
- Clock Frequency: ESP32-S3R8: 240MHz
- Operating Voltage: 3.3V
- Analog pins: 8
- Digital Pins: 14
- UART: 2
SKU: R107350 -
-
IoT Development Boards
NanoPi R5C No wif/Blt 4 GB RAM + 32GB eMMC Combo with Metal Case
SKU: 1873852- Model: NanoPi R5C No wif/Blt 4 GB RAM + 32GB eMMC Combo with Metal Case
- Rockchip RK3568B2 Quad-core A55
- 1GB/2GB/4GB LPDDR4X RAM
- Dual 2.5G Ethernet Ports
- HDMI 2.0
- FriendlyWrt 22.03 w/ Kernel 5.10
- UbuntuCore/Desktop W/ GPU&VPU accelerated
SKU: 1873852 -
IoT Development Boards
Espressif ESP32-PICO-DevKitM-2 Development board
SKU: 1696731- On Board chip: ESP32 system on a chip (ESP32 SoC)
- LDO: V-to-3.3V Low dropout voltage regulator (LDO).
- USB-to-UART bridge: CP2102N, single-chip USB-UART bridge that offers up to 3 Mbps transfers rates
- Connectivity Technology: Bluetooth ,Wifi
SKU: 1696731 -
IoT Development Boards
NanoPi R4S
SKU: 1470332- CPU: big.LITTLE,Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
- GPU: Mali-T864 GPU,supports OpenGL ES1.1/2.0/3.0/3.1, OpenCL, DX11, and AFBC
- NPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
- DDR3 RAM: 1GB DDR3/4GB LPDDR4
- Storage: No Onboard eMMC
SKU: 1470332 -
-
-
IoT Development Boards
LinkIt Connect 7681 – Wi-Fi HDK for IoT
SKU: 336555- Chipset Core: MT7681 ANDES N9
- Clock Speed: 80MHz
- Flash: 1MB, RAM: 64KB
- Power: on-board 1A 3.3V voltage regulator (can be powered from USB connector)
- Connectors: UART/GPIO/SPI pins are available on connectors (100mil/2.54mm pitch), micro USB connector.
- GPIO Voltage: 3.3V
- PWM Output pin Count: 5
- PWM levels: 0~20
- UART Voltage: 3.3V
- Wi-Fi Spec: 802.11 b/g/n for Station mode; 802.11 b/g for AP mod
SKU: 336555