Flight Controller & Accessories
-
APM 2.8 Flight Controller with Built-in Compass
SKU: 28963₹ 2,425.00(inc GST)
₹ 2055.08 (+18% GST extra)
- Straight Needle
- Arduino Compatible!
- Onboard 4 MegaByte Dataflash chip for automatic data logging.
- Optional off-board GPS, a uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
-
Pixhawk PPM Encoder Module
SKU: 29328₹ 550.00(inc GST)
₹ 466.1 (+18% GST extra)
- Support the input channels: 8.
- Output: PPM SUM × 1 / MUX × 1.
- Dimensions: 28 x 19 x 5 mm.
- Weight: 12 gm. (containing all the input and output wires).
Read moreThe product is already in the wishlist! Browse Wishlist -
DF13 6 Pin Flight Controller Cable
SKU: 58194₹ 89.00(inc GST)
₹ 75.42 (+18% GST extra)
- Item Name: DF13 6 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 6 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
-
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller-Good Quality
SKU: 29453₹ 5,950.00(inc GST)
₹ 5042.37 (+18% GST extra)
- The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.
- 14 PWM / servo output.
- Bus interface (UART, I2C, SPI, CAN).
- The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.
- Provide automatic and manual modes.
- Provide redundant power input and failover.
- Multicolor LED lights.
- Provide multi-tone buzzer Interface.
- Micro SD recording flight data.
-
DF13 4 Pin Flight Controller Cable
SKU: 58221₹ 49.00(inc GST)
₹ 41.53 (+18% GST extra)
- Item Name: DF13 4 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 4 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
-
DJI Naza-M Lite Multi-Rotor Flight Controller without GPS
SKU: 29615₹ 4,490.00(inc GST)
₹ 3805.08 (+18% GST extra)
- All-in-One Design
- Low Voltage Protection
- 6 Supported Multi-rotor Types
- Advanced Attitude Stabilize Algorithm
- Intelligent Orientation Control (IOC)
- Motor Arm and Motor Dis-arm
- Built-in Gimbal Stabilization Function, Failsafe Mode
- Support Futaba S-Bus and PPM Receiver
- Supported ESC output: 400Hz refresh frequency
-
SP Racing F3 Flight Controller ACRO Version with CP2104 USB to TTL convertor
SKU: 45626₹ 1,190.00(inc GST)
₹ 1008.47 (+18% GST extra)
- The STM32F3 CPU, MPU 6050 sensor, 16M high-capacity flash memory, OSD function.
- The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
- Tiny and lightweight, the Racing F3 has a standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 6 grams.
- Flight Logging, on-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without guesswork.
- OneShot ESC, full support for OneShot ESCs for easy PID tuning and a sharper response.
- Broad RC receiver supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers, no external inverters required (built-in).
-
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
SKU: 3106₹ 1,649.00(inc GST)
₹ 1397.46 (+18% GST extra)
- MODEL: KK2.1.5
- IC: Atmega644 PA
- GYRO/ACC.: 6050MPU InvenSense Inc.
- AUTO LEVEL: Yes
- INPUT VOLTAGE: 4.8V-6.0V
- AVR INTERFACE: Standard 6 Pin
- SIGNAL FROM RECEIVER: 1520us(5 channels)
- SIGNAL TO ESC: 1520us
-
Pixhawk I2C Port Expand Board with Cable
SKU: 29000₹ 199.00(inc GST)
₹ 168.64 (+18% GST extra)
- Package Weight: 5 gmÂ
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 3g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
-
OpenPilot CC3D EVO Flight Controller with Side Pins
SKU: 29588₹ 1,090.00(inc GST)
₹ 923.73 (+18% GST extra)
- Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
-
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
SKU: 45650₹ 1,090.00(inc GST)
₹ 923.73 (+18% GST extra)
- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Run on SP RACING F3 EVO firmware 32 brush flight control
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
-
DJI NAZA-M Lite V1.1 with GPS Kit
SKU: 56686₹ 7,799.00(inc GST)
₹ 6609.32 (+18% GST extra)
- Supported Multi-Rotor: Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6.
- Supported ESC Output: 400Hz refresh frequency.
- Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels.
- Power Consumption: MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V).
- Weight: MC:25g; VU:20g; GPS:21.3g.
- All-in-One Design.
- Advanced attitude stabilized Algorithm.
- Multiple flight control mode/intelligent switching.
- GPS Module Available/Accurate Position hold.
- Intelligent Orientation Control (IOC).
- Failsafe mode.
-
Naze32 6DOF Flight Control board
SKU: 29592₹ 1,090.00(inc GST)
₹ 923.73 (+18% GST extra)
- Battery voltage monitoring.
- Built-in FrSky telemetry converter.
- Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
- Onboard USB for setup and configuration.
- Modern GUI for all operating systems, Baseflight Configurator.
-
OMNIBUS F4 V2 PRO Flight Controller with SD Card Slot & BEC
SKU: 57107₹ 2,690.00(inc GST)
₹ 2279.66 (+18% GST extra)
- Dimensions: 37 x 37 x 10 mm(L x H x W)
- Weight: 12 gm.
- SPI Gyro MPU6000
- MicroSD Blackbox
- F4 Processor (F405)
- 5v3a SBEC
- Built-in Current Sensor
- On-Board OSD (controlled by Beta flight, FC over SPI bus)
- On-Board Video Filter (only can supply 5V to VTX and Camera)
- On-Board Voltage Regulator and Power supply (BEC)
-
Naze32 10DOF Flight Control Board
SKU: 29597₹ 1,615.00(inc GST)
₹ 1368.64 (+18% GST extra)
- Axis: 2000 degrees/second 3-axis MEMS gyro.
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Built-in FrSky telemetry inverter (shared w/main port).
- A modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
- Onboard MicroUSB for setup and configuration.
- Multi WiFi-based configuration software for easy setup.
-
Naze 32 Full REV6 Flight Controller with Compass & Barometer
SKU: 57248₹ 1,749.00(inc GST)
₹ 1482.2 (+18% GST extra)
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500).
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Fully pinout compatible with rev5 accessories (OSDoge etc).
- SBUS Inverter.
- Sonar pads w/resistors added for direct connection to 5V sonar.
- MS5611Â barometer.
- 128mbit flash.
-
DJI NAZA-M V2 Multirotor Autopilot Controller set with GPS
SKU: 45468₹ 14,999.00(inc GST)
₹ 12711.02 (+18% GST extra)
- All-In-One Compact Multi-Rotor Autopilot System
- New Assistant Software for Smartphones
- Multiple Flight Control Modes and Intelligent Switching
- GPS Module Available for Accurate Position Stabilization
- 2-Axis Gimbal Stabilization
- Two Levels of Low Voltage Warnings and Protection
- Single Motor Failure Protection
- Supports Remote Gain Adjustment from the Transmitter
- Enhanced Failsafe Features, Including Auto Return-to-Home
- Supported ESC Output 400 Hz refresh frequency
- Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
- Power Consumption MAX: 1.5 W (0.3 A at 5 V)
- Operating Temperature: -10 to 50°C
- Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems
-
Mini USB (90° Connector) to FPV AV Output Cable for GoPro Hero 3
SKU: 29366₹ 199.00(inc GST)
₹ 168.64 (+18% GST extra)
- USB connector is used to connect to the USB port on your GoPro Hero3 Camera.
- The 3 pin female connector is for AV video output
Typical application:
Video output from your GoPro Hero 3 USB port to your video wireless transmitter. (Connect your GoPro Hero 3 directly to FPV transmitter)
-
SP Racing F3 Flight Controller Deluxe
SKU: 45528₹ 2,590.00(inc GST)
₹ 2194.92 (+18% GST extra)
- Â Stackable design – perfect for integrating with OSDs and power distribution boards.
- 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
- Full support for OneShot ESCs for easy PID tuning and a sharper response.
- Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers.
- No external inverters required (built-in).
- Dedicated output for programmable LEDs – great for orientation, racing and night flying.
- Dedicated I2C port for connection of OLED display without needing flight battery.
- Battery monitoring ports for voltage and current.
- Sonar support for precision low-altitude hold.
- Buzzer port for audible warnings and notifications.
- Symmetrical design for a super tidy wiring.
- Barometer mounted on the bottom of the board for easy wind isolation.
- Â Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
-
SP RACING F3 FC Replacement Accessories Set
SKU: 58032₹ 190.00(inc GST)
₹ 161.02 (+18% GST extra)
Accessories compatible with SP RACING F3 Flight Controller Module
High-quality cable and connectors.
1 x 3*8 Burg connector(Straight)
1 x 3*8 Burg connector(Right-angle)
1 x 1*10 Burg Connector(Straight)
2 x 2pt cable
2 x 4pt cable
2 x 8pt cable -
Mini OSD for Pixhawk Flight Controller
SKU: 57684₹ 990.00(inc GST)
₹ 838.98 (+18% GST extra)
- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6 pin ISP header
- 2 independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections
Compatible flight controller:
APM2.5/2.6/2.8
Pixhawk PX4 -
Micro Minim OSD For Racing F3 Naze32 Flight Controller RC Drone
SKU: 29457₹ 649.00(inc GST)
₹ 550 (+18% GST extra)
- ATmega328P with Arduino bootloader.
- MAX7456 monochrome on-screen display.
- +5V 500mA regulator for up to +12V supply input.
- FTDI cable compatible pinout.
- The standard 6-pin ISP header.
- Standalone, or with APM/ Flip / Flip32+ flight controllers.
-
Pixhawk PX4 2.4.7 32Bits Flight Controller for Quadcopter Multicopter
SKU: 28968₹ 8,099.00(inc GST)
₹ 6863.56 (+18% GST extra)
- 168 MHz / 252 MIPS Cortex-M4F.
- Abundant connectivity options for additional peripherals (UART, I2C, CAN).
- Integrated backup system for in-flight recovery.
- Redundant power supply inputs and automatic failover.
- External safety switch.
- Multicolor LED main visual indicator.
-
OMNIBUS F4 Pro V3 Flight Controller
SKU: 127282₹ 2,990.00(inc GST)
₹ 2533.9 (+18% GST extra)
- STM32 F403 MCU (Spi connected to Gyro)
- Built-in Current/Voltage sensor!
- Firmware hex =Â OMNIBUSF4SD hex from the drop-down.
- MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
- Smart audio capable VTX PID Programming
- D- Shot Supported (no Modification)
- OSD (configured over Betaflight UI)
- SD CARD Slot for BlackBox
- SBUS/PPM + DSMX Ports
- SmartAudio V2 via J10
- current + voltage + rssi + buzzer as pins
-
OpenPilot CC3D EVO Flight Controller Straight Pin
SKU: 50818₹ 1,249.00(inc GST)
₹ 1058.47 (+18% GST extra)
- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
-
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller-Normal Quality
SKU: 189785₹ 5,499.00(inc GST)
₹ 4660.17 (+18% GST extra)
- The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.
- 14 PWM / servo output.
- Bus interface (UART, I2C, SPI, CAN).
- The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.
- Provide automatic and manual modes.
- Provide redundant power input and failover.
- Multicolor LED lights.
- Provide multi-tone buzzer Interface.
- Micro SD recording flight data.
-
Omnibus F4 V2 PRO Flight Controller with Built-in OSD
SKU: 61182₹ 1,990.00(inc GST)
₹ 1686.44 (+18% GST extra)
- STM32 F405 MCU
- Runs Beta flight (3.0.1 and up)
- Race light and D-ronin firmware
- SBUS/PPM input (Pinheaders)
- 6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
- Only 36x36mm, mount holes 30.5×30.5mm
- SPI Sensor MPU6000
- 128Mbit Flash
-
Flip32 OMNIBUS F4 Flight Controller
SKU: 127316₹ 1,499.00(inc GST)
₹ 1270.34 (+18% GST extra)
- 128Mb Flash(16M Byte)
- SBUS/PPM input (Pinheaders)
- DSM/DSM2/DSMX input(Plug)
- 6PWM output (Pinheaders)
- Only 36x36mm, mount holes 30.5×30.5mm
- All through hole pin header Design  -no Sh connectors
- STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
- Works Perfect with Raceflight or BetaFlight 3.0
-
F4 Flight Controller
SKU: 57329₹ 1,790.00(inc GST)
₹ 1516.95 (+18% GST extra)
- Dshot support
- Drag and Drop OSD configured via Beta flight Configurator
- MPU6000 6 axis SPI Gyro & Accelerometer
- SBUS/PPM AND Spektrum DSMX Ports
- MicroSD card black box
- Onboard Video Filter(only can supply 5V to VTX and Camera)
- SmartAudio V2 via tx6 on J10
-
 Anti-Vibration Fixed Screws 4pcs
SKU: 674153₹ 112.00(inc GST)
- Length: 7mm rubber/ 4.5mm screw length
- Installation groove diameter: diameter of 2.9 mm
- Anti-vibration screws are the best way to soft mount your flight controller.
- Flight controller anti-vibration screws are easy to install, perfect fit, and significant vibration elimination.
-
SP Racing F3 Flight Controller Integrate OSD ACRO Version
SKU: 61253₹ 2,590.00(inc GST)
₹ 2194.92 (+18% GST extra)
- STM32F303 CPU, 72Mhz inc FPU
- CPU: STM32F303, 72Mhz inc FPU
- Acro: High-Capacity Flash
- Accelerometer/gyro: MPU6050
- Board size: 36 x 36 x 5mm (without shell)
- Board weight: 5.9g
- Weight: 22 gm(with all accessories)
-
Mini APM3.1 Flight Controller with Power Module for Multicopter FPV
SKU: 45511₹ 3,499.00(inc GST)
₹ 2965.25 (+18% GST extra)
- 8 Channel PWM input
- Â 8 motor outputs
- Â 12-way Auxiliary input and output
- Â Supports GPS, compass, telemetry and power module
- Â Onboard connections JST-SH with 1.0mm pitch
- Â Compatible with official Firmware and Groundstation.
-
Holybro Original Pixhawk PX4 Flight Controller (without GPS)
SKU: 311064₹ 17,369.00(inc GST)
₹ 14719.49 (+18% GST extra)
- Main FMU Processor: STM32F76
- 32 bit ARM® Cortex® M7, 216 MHz Processor running NuttX RTOS,
- More computing power and 2X the RAM than previous versions)
- Abundant connectivity options for additional peripherals (UART, I2C, CAN)
- Redundant power supply inputs and automatic failover
- External safety button for easy motor activation
- New sensors with higher temperature stability
- Multicolor LED indicator
- Integrated vibrations isolation
- High-power, multi-tone piezo audio indicator
- microSD card for long-time high-rate logging
-
F3 EVO V2.0 Flight Control
SKU: 674161₹ 1,686.00(inc GST)
- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
