ED-GW1303S module is a new generation of LoRaWAN gateway module in mini-PCIe form-factor with SPI interfaces based on Semtech® SX1303 and SX1250. It features extremely low power consumption, outstanding performance with CE, FCC certified.
ED-GW1303S LoRaWAN gateway module support both US915 and EU868 frequency bands, enable you to have a wide-range of LoRaWAN frequency plans options to choose. This is Lora Module with part no. code as ED-GW1303S-915M.
EDATEC’s ED-GW1303S is a LoRaWAN gateway module in a mini PCIe® form-factor with SPI interfaces and is based on the Semtech® SX1303 and SX1250. The module features extremely low power consumption and outstanding performance with CE and FCC certifications.
ED-GW1303S is designed for M2M and IoT applications and can be widely applied in LPWAN gateway supported scenarios. It would be a perfect choice for you to significantly reduce the technical difficulties and time-consumption when developing the LoRa gateway devices, including LoRaWAN gateway, miner hotspots, etc.
Pinout Interfaces:
- Power Supply – This module must be supplied through the VCC_3V3 pins by a DC power
- SPI Interfaces – It’s SPI slave side and gives access to the configuration registers of SX1303
- GPS-PPS – This module includes the GPS_PPS input for received packets time-stamped and Fine timestamp
- RESET – It includes the RESET active-high input signal to reset the radio operations as specifiedby the SX1303 Specification
- Antenna RF Interface – The module has one RF interface over a standard UFL connector, The RF port supports both Tx and Rx, providing the antenna interface.’
Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.
Features:
- Mini PCIe form-factor with SPI interfaces
- Powered by the Semtech SX1303 baseband processor
- Ultra-low operating temperature without additional heat dissipation needed
- Certified with CE and FCC
- High sensitivity with the Semtech SX1250 TX/RX front-end: TX power: up to 27 dBm at 3.3 V
- Power – Output: 25dBm
- Sensitivity: -141dBi
- Serial Interfaces: SPI
- Utilized IC / Part: SX1303
- Current – Receiving: 54mA
- Current – Transmitting: 306mA
Package Includes:
1 x EDATEC 915M Lora Module for US Base on SX1303 FCC
There are no reviews yet.