611hyQZ-6TL._SL1010_ RC-font-b-Quadcopter-b-font-Parts-font-b-Carbon-b-font-font-b-Fiber-b 51e2M-+QO-L._SL1010_ 41Yur0mQEhL._SL1010_ 51lViWND9rL._SL1010_

Q250 Quadcopter Strong Carbon Fiber FPV Racing Frame(250mm) Kit

2 Review(s)
Availability: Out stock
SKU: 32643


  1. Wheelbase: 250mm
  2. Material: Full Carbon Fiber
  3. Weight: 160 gm
  4. The arm equips dampers for the safe landing.
  5. The arm has multiple motor mounting holes.
  6. Equips vibration-free mounting bracket for FPV camera.


(inc GST)

₹ 1008.47 (+18% GST extra)

Out of stock - Join the waitlist to be emailed when this product becomes available

The Q250 is a mini-size quadcopter frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. This frame is known for its toughness and durability.

This Q250 carbon fibre frame is available in 2 different choices at as follow

>> Q250 Super Stong Carbon Fiber Quadcopter Frame for FPV Racing
>> Q250 Carbon Fiber Quadcopter Frame for FPV Racing

The difference between them is the quality of material used in manufacturing, hence the Q250 with Super Stong Carbon Fiber dominates the Q250 with Conventional Carbon FIber. So the Q250 Super Stong Carbon Fiber Quadcopter Frame for FPV Racing costs more.

This Q250 Quadcopter Frame is made from Carbon Fiber which makes it tough and durable. The carbon fiber arms of thickness 3mm which ensure no more arm breakage at the motor mounts on a hard landing. The arms have dampers at the end, which protects motors during the crash.

The carbon fiber is mostly accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance.

The frame is lightweight and possesses thick arms, so as to give them good mechanical strength. The mini-size design of this quadcopter frame makes it aerodynamically efficient which will require lower throttle to hover. The design allows the whole take-off weight to be controlled at about 500-600 grams!!!! Great!!!!!

The frame has the wheelbase of 250mm and weighs around 160gm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 37mm board cams as well as cams in cases with mounting bracket.

It’s longer top and bottom plate allow easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

The Q250 Carbon Fiber Quadcopter Frame equips anodized alloy spacers. The arms of this carbon fiber frame feature multiple motor mounting holes so as to fit a variety of motors. It equips vibration-free mounting bracket for housing the camera on the frame.

We are offering a full line of multi-rotor accessories,
Multirotor Motors
ESC’s (Electronic Speed Controller)
Orange Li-PO Batteries
Flight Controllers
FPV Cameras

Or explore more variety of multirotor accessories by clicking below

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Note: The dimensions and weight may have  ±2% error.

Features :

  1. Lightweight and Durable.
  2. Made by super strong and advanced engineering material.
  3. The frame has excellent strength.
  4. The arm equips dampers for the safe landing.
  5. The arm has multiple motor mounting holes.
  6. Equips vibration-free mounting bracket for FPV camera.

Package Includes : 

3 x Quadcopter Frame Plates(top, bottom, and centre).
4 x Strong carbon fibre arm.
8 x Aluminum column.
4 x Rubber Shock absorbing Ring.
1 x Camera lens holder.
1 x Carbon fibre spacer mountings.
Set of Screws and Nuts


Note: Landing Gear Shown in the pictures is discontinued by the manufacturer as they were not serving the purpose properly. you simply can install the 3 Inch Spacers to use as Landing gear.


Recommendation (NOT Included ) :

  1. Propeller: 5″ or 6″ Orange Propeller (CW & CCW)
  2. Battery: 3S Orange LiPo (1800 – 2200mAh)
  3. ESC: 15A -25A.
  4. Motor: 800-100 KV (brushless dc motor)
  5. Power Distribution Board(PDB)



Carbon Fiber

Wheelbase (mm)


Height (mm)


Weight (gm)


Arm Size (mm)

114×25 (LxW)

Shipment Weight

0.2 kg

Shipment Dimensions

21 x 9 x 4 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

2 reviews for Q250 Quadcopter Strong Carbon Fiber FPV Racing Frame(250mm) Kit

  1. Rated 4 out of 5

    Krishna (verified owner)

    Good and light weight. And priced rightly.

  2. Rated 5 out of 5

    Ishan (verified owner)

    Thik h

Add a review

Your email address will not be published. Required fields are marked *


Assembly Guide