WIZnet W5100S-EVB-Pico

Availability:

In stock


SKU: 1490026
  1. RP2040 microcontroller with 2MByte Flash
  2. Dual-core cortex M0+ at up to 133MHz
  3. 264kByte multi-bank high-performance SRAM
  4. 30 multi-function General Purpose IO (4 can be used for ADC)
  5. 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
  6. 12-bit 500ksps Analogue to Digital Converter (ADC)

 1,099.00

(Including GST)

In stock

Purchase this product now and earn 11 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: WIZnet
Category: Raspberry Pi Hats
Tags: hat for raspberry pi

W5100S-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and entirely hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.

WIZnet W5100S-EVB-Pico Evaluation Board is a compact development platform based on the Raspberry Pi RP2040 Microcontroller. The 133MHz RP2040 MCU has a dual Arm® Cortex®-M0+ core delivering high performance, with various low-power modes to support extended-duration operation on battery power. The RP2040 also features a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and a rich peripheral set augmented with the RPi Programmable I/O (PIO) subsystem.

Wiznet W5100S-Evb-Pico

Note: Product Images are shown for illustrative purposes only and may differ from the actual product.


Features:

  1. RP2040 microcontroller with 2MByte Flash
  2. Dual-core cortex M0+ at up to 133MHz
  3. 264kByte multi-bank high-performance SRAM
  4. External Quad-SPI Flash with eXecute In Place (XIP)
  5. High-performance full-crossbar bus fabric
  6. 30 multi-function General Purpose IO (4 can be used for ADC)
  7. 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
  8. 12-bit 500ksps Analogue to Digital Converter (ADC)
  9. Various digital peripherals
  10. 2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels
  11. 1 × Timer with 4 alarms, 1 × Real Time Counter
  12. 2 × Programmable IO (PIO) blocks, 8 state machines total
  13. Flexible, user-programmable high-speed IO
  14. Can emulate interfaces such as SD Card and VGA
  15. Includes W5100S
  16. Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
  17. Supports 4 Independent Hardware SOCKETs simultaneously
  18. Internal 16 Kbytes Memory for TX/ RX Buffers
  19. SPI Interface
  20. Micro-USB B port for power and data (and for reprogramming the Flash)
  21. 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
  22. 3-pin ARM Serial Wire Debug (SWD) port
  23. 10 / 100 Ethernet PHY embedded
  24. Supports Auto-Negotiation
  25. Full / Half Duplex
  26. 10 / 100 Based
  27. Built-in RJ45(RB1-125BAG1A)
  28. Built-in LDO (LM8805SF5-33V)

Package Includes:

1 x WIZnet W5100S-EVB-Pico

SKU: 1490026 Category: Tag:
Supply voltage(VDC)

5

Operating Voltage (VDC)

3.3

GPIO

26 Pins

Flash Memory

2MB.

SRAM

264 KB

Shipping Weight 0.018 kg
Shipping Dimensions 9 × 3 × 3 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “WIZnet W5100S-EVB-Pico”

There are no reviews yet.

Getting Started

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…