Generic
Showing 1153–1200 of 6106 results
-
Plastic Push Button Switch
12x12x7.3 mm Round Cap for Square tactile Switch – Black (10 Pcs.)
SKU: 890231- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
SKU: 890231 -
Other 3D Printer Accessories
Reprap StepStick heat sink, 9*9*12MM cooler Aluminum, heat dissipation suitable for, drv8825/A4988/A4983/MKS, TMC2100 Mendel
Other 3D Printer AccessoriesReprap StepStick heat sink, 9*9*12MM cooler Aluminum, heat dissipation suitable for, drv8825/A4988/A4983/MKS, TMC2100 Mendel
SKU: 1121398- Quantity of blade:
- Material: Aluminum
- Color: Black
- Blade thickness:
- Base plate thickness:
- Compatible with:drv8825/A4988/A4983/MKS TMC2100 Mendel
- Dimensions: 9x9x12 mm
SKU: 1121398 -
-
-
IMU, Accelerometer, Magnetometer & Gyroscope
GY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor -(China Chip)
IMU, Accelerometer, Magnetometer & GyroscopeGY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor -(China Chip)
SKU: 419760- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage:Â 3 -5 V DC.
- Driver Chip: QMC5883L.
- Communication:Â I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
SKU: 419760 -
Battery Chargers, Battery Charging Boards
XH-M604 6V-60V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
Battery Chargers, Battery Charging BoardsXH-M604 6V-60V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
SKU: 1121440- Â Input Voltage: DC 6-60V
- Display Accuracy: 0.1V
- Control Accuracy: 0.1V
- Output Type: direct output
- Voltage Tolerance: ±0.1V
- Apply For:6-60V Lithium Lead-acid battery
SKU: 1121440 -
-
-
-
Buck Converter
48V36V24V to 19V12V9V5V3V Adjustable Synchronous Stepdown Module / Car Charging Power Supply
Buck Converter48V36V24V to 19V12V9V5V3V Adjustable Synchronous Stepdown Module / Car Charging Power Supply
SKU: 975695- Input Voltage: 6.5V-60V
- Output Voltage: 1.25-30V
- Adjustable Efficiency: 97% (MAX)
- Load capacity: large 10A
- Wiring method: the terminal is free of soldering, IN is input, OUT is output.
SKU: 975695 -
Slide Switches
Slide Switch SK-02
SKU: 1883638- MPN: SK-02
- Items: Standard
- Rated current: 50mA
- Rated voltage: 12V DC
- Insulation resistance: 100 MΩ min
- Insulation voltage: 100V DC
- Compressive strength: 110V AC for 50Hz/1 min
- Contact resistance: 50MΩ max
- Operating temperature range: -30°c to 85℃
- Lifetime: 10,000 Cycles min
- Operating force: 200 + 50gf or 200 – 50gf
- Travel: 1.5 + 0.1mm or 1.5 – 0.1mm
SKU: 1883638 -
Lead Screw and Nut
500mm Trapezoidal 4 Start Lead Screw 10mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw and Nut500mm Trapezoidal 4 Start Lead Screw 10mm Thread 2mm Pitch Lead Screw with Copper Nut
SKU: 501497- Lead Screw Material: 304 Stainless Steel.
- Length: 500mm.
- Diameter: 10mm.
- 4 Start Lead Screw
- Brass Nut Size: 32 (Body Diameter) x 19 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
SKU: 501497 -
Plastic Push Button Switch
12x12x7.3 mm Round Cap for Square tactile Switch – White (10 Pcs.)
SKU: 890235- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
SKU: 890235 -
Electronic Switches/Keypads Modules
Black Electronic Building Blocks Big Key Button Module High Level Output
Electronic Switches/Keypads ModulesBlack Electronic Building Blocks Big Key Button Module High Level Output
SKU: 1165420- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
SKU: 1165420 -
Current and Voltage Sensor
SCT-013-060 Non-invasive AC Current Sensor Clamp Sensor 60A
SKU: 618494- Input current (RMS): 60A.
- Max current: 75A.
- Work temperature: -25℃～+70℃.
- Storage temperature: -30℃～+90℃.
- Work voltage: 660V.
- Frequency range: 50Hz-1KHz.
- Dielectric strength: 3.5KV 50Hz 1min
SKU: 618494 -
-
Raspberry Pi Case
10 Layer Acrylic Case for Raspberry PI 4
SKU: 803590- 10 Layer Acrylic stylish case with access to all Ports on pi 4
- Compatible for All variant of the Raspberry pi 4 Model B
- Slot for Cooling Fan
- Easy to assemble with Nut-Bolts included
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
SKU: 803590 -
-
-
IR and RF Transmitters and Receivers
RFM69HCW Wireless Receiving Module-434 MHz
SKU: 223521RFM69 series wireless communication module is designed to work at 434Mhz ISM band global free application. It is designed for low-power, high-bandwidth wireless digital communications module. The modules have a low cost, small, stable, product consistency and other characteristics
SKU: 223521 -
Boost Converter
XL6019 DC-DC 5A Adjustable Boost Power Supply Module
SKU: 1150801- Model: XL6019
- Product: Adjustable Boost Power Supply Module
- Input Current: 5A (MAX)
- Input Voltage: DC 3-35 V Switching
- Working Temperature: Industrial (-40 ° C to + 85 ° C)
- Negative Output Voltage: DC 5-40V (Adjustable)
- Frequency: 220 kHZ
SKU: 1150801 -
Relay Modules
5V 6 Channel Low Level Relay Module with Light Coupling
SKU: 618463- 6-way relay output module contact capacity is 10A 250V.
- input IN1, IN2, IN3, IN4, IN5, IN6 signal, a low level is effective.
- Using single-chip design, reliable performance, strong anti-interference, no false triggering, superior performance.
- The trigger terminal has optocoupler isolation, the independent external power supply can trigger completely isolated.
- Each relay has an activity indicator light. With 4 fixed bolt holes, easy installation.
- Support all SCM control. It is applicable to the industrial sector, PLC control and home intelligent control.
SKU: 618463 -
-
Interfacing Cables, Boost Converter
USB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
Interfacing Cables, Boost ConverterUSB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
SKU: 1165405- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Cable Length: 1 meter / 2 meter
- Color: BLACK
- Input / Output Current: Maximum input 1
SKU: 1165405 -
-
-
-
-
E-Bike Controllers, E-Wheelchair Controllers
12V 250W MY6812 EBIKE Brush Controller
SKU: 665655- High-quality product
- Rated Voltage: 12V
- Rated Power: 250W
- SENSITIVE CONTROL: This brushed motor controller can provide steady speed and sensitive control of braking and direction changes.
- PREMIUM MATERIAL: Made of aluminum alloy, this brushed controller is sturdy and durable, widely suitable for most E-bike and scooters.
SKU: 665655
