Generic
Showing 1201–1248 of 6080 results
-
-
Raspberry Pi Case
10 Layer Acrylic Case for Raspberry PI 4
SKU: 803590- 10 Layer Acrylic stylish case with access to all Ports on pi 4
- Compatible for All variant of the Raspberry pi 4 Model B
- Slot for Cooling Fan
- Easy to assemble with Nut-Bolts included
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
SKU: 803590 -
-
Load / Pressure / Force / Flex Sensor
GY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module
Load / Pressure / Force / Flex SensorGY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module
SKU: 488983- The built-in 24bit AD converter.
- Immersion gold PCB, high quality, machine welding process to ensure quality.
- Power supply: 3 – 5V ( internal low dropout regulator ).
- Communication modes: Standard the IIC / SPI communication protocol.
SKU: 488983 -
IR and RF Transmitters and Receivers
RFM69HCW Wireless Receiving Module-434 MHz
SKU: 223521RFM69 series wireless communication module is designed to work at 434Mhz ISM band global free application. It is designed for low-power, high-bandwidth wireless digital communications module. The modules have a low cost, small, stable, product consistency and other characteristics
SKU: 223521 -
Raspberry Pi Hats
Raspberry Pi GPIO Multi-function Expansion Board for PI 4B/3B/3B+
SKU: 51867- Perfect snap-in terminal for simple Raspberry PI connectivity.
- Multifunction GPIO expansion board.
- Easily connect Raspberry connectors and pins using jumpers.
- Compatible with Raspberry Pi 4B/3B/3B+.
SKU: 51867 -
-
E-Bike Controllers, E-Wheelchair Controllers
12V 250W MY6812 EBIKE Brush Controller
SKU: 665655- High-quality product
- Rated Voltage: 12V
- Rated Power: 250W
- SENSITIVE CONTROL: This brushed motor controller can provide steady speed and sensitive control of braking and direction changes.
- PREMIUM MATERIAL: Made of aluminum alloy, this brushed controller is sturdy and durable, widely suitable for most E-bike and scooters.
SKU: 665655 -
-
-
-
-
-
-
-
Raspberry Pi Accessories
Thickened Thermal Conductive Silica Gel Pad Size: 10x10x6MM
SKU: 1150785- Product: Thermal Conductive Silica Gel Pad
- Product type: Thermal Insulator Gel pad
- Operating Temperature: -40 ℃ – 200 ℃ will not melt
- Color: Color of Actual Product Can vary from given Image
- Â Size: 10x10x6MM
SKU: 1150785 -
-
-
Stepper Motors
42HS40-1504 NEMA17 4.2 Kg-cm Stepper Motor – D Type Shaft
SKU: 1645126- Model: 42HS40-1504 NEMA17 / 17HS4401
- Stable structure, no jamming
- Stable speed and low noise
- Step Angle(degrees): 1.8°±0.09°
- Phase Inductance: 3.7*(1±20%)mH/Phase
- Positioning Torque: 15 mN.m REF.
- Maximum starting rate:≥1500 PPS
- Insulation resistance:≥100 MΩ (DC 500V)
- Cable length: 1meter
SKU: 1645126 -
Cable Splices
1.5mm Electrical Waterproof Seal Heat Shrink Splice Wire Sleeve White 4pcs
SKU: 471362- Shrinkage ratio: 2:1.
- Tubing: Polyolefin.
- Operating temperature : -55℃ ~ 125℃.
- Minimum shrink temperature: 80℃.
- Starting temperature of solder melt: 138℃.
- Minimum full recovery temperature: 160℃.
SKU: 471362 -
Battery Pack Accessories & Holders
4 X 6 18650 Battery, Holder with 18.5MM, Bore Diameter
SKU: 1187613- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187613 -
Current and Voltage Sensor
SCT-013-015 Non-invasive AC Current Sensor Clamp Sensor 15A
SKU: 618491- Input current (RMS): 15A.
- Max current: 40A.
- Work temperature:-25℃～+70℃.
- Storage temperature:-30℃～+90℃.
- Work voltage:660V.
- Frequency range:50Hz-1KHz.
- Dielectric strength:3.5KV 50Hz 1min
SKU: 618491 -
-
-
Mini Pumps and Accessories, Generic Mini Pumps
5V Noiseless Mini Submersible Pump with USB input Plug
Mini Pumps and Accessories, Generic Mini Pumps5V Noiseless Mini Submersible Pump with USB input Plug
SKU: 815811- Simple Plug and Play operation.
- USB input Plug
- It Can operate on any 5V DC power supply like Power bank
- 1 Meter cable with DC jack provides the convenience to connect and disconnect project easily
- Can pump 16 litres per minute
SKU: 815811 -
