Generic
Showing 1393–1440 of 6080 results
-
3D Printer Extruder Parts and Fans
PC6-M10 Pneumatic Push in Bowden Extruder for 6mm tube J-Head fitting
3D Printer Extruder Parts and FansPC6-M10 Pneumatic Push in Bowden Extruder for 6mm tube J-Head fitting
SKU: 288374- Inside Diameter: 6mm
- Thread Size: M10
- PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament)
- Materials:Â Nickel Plated Brass
- Release Method:Â Elliptical John Guest Fitting
SKU: 288374 -
-
-
-
Signal Generator Module & Oscilloscopes
ICL8038 12V to 15V, Signal Generator, Medium/Low Signal, Frequency 10Hz-450KHz, Triangular/Rectangular/S, ine Wave Generator, Module
Signal Generator Module & OscilloscopesICL8038 12V to 15V, Signal Generator, Medium/Low Signal, Frequency 10Hz-450KHz, Triangular/Rectangular/S, ine Wave Generator, Module
SKU: 1121315- Working voltage: 12V ~ 15V
- Output: Triangular wave, Square wave and sine wave.
- Frequency range: 10HZ ~ 450kHz
- Low distortion sine wave: 1%
- Duty cycle range: 2% to 98%
- Low temperature drift: 50ppm / ℃
- Triangular wave output linearity: 0.1%
- Working temperature: 0 ~ 70 ℃
- Board size: 54.5*37.8mm
SKU: 1121315 -
-
-
Battery Pack Accessories & Holders
3 x 26650 Battery Holder with 26.3MM Bore Diameter
SKU: 1187464- Model: 26650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 26.3MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187464 -
-
Boost Converter
DC12-80V 600W High Power Adjustable Voltage Constant Current Module
SKU: 975721- Module Type: Step-Up (Boost)
- Input voltage: 12V-60V
- Input Current: Maximum input current 15A
- Output voltage: 12V-80V adjustable
- Output Current: Maximum output current 10A
- Output Power: 600W
- Short circuit protection: Fuse (Input 20A Fuse)
- Overcurrent protection: Yes
SKU: 975721 -
-
-
-
12V Li-Ion Battery (11.1V~12.6V)
Orange INR 18650 11.1V 2000mAh 3C 3S1P Li-Ion Battery Pack
SKU: 514618- Maximum Output Voltage: 12.6 VDC.
- High energy density.
- Charge connector: JST-XH connector
- Discharge connector: Nylon Female T Connector
- Good consistency and low self-discharge.
- Long life with full capacity for up to 500 charge cycles.
- Inbuilt (BMS) battery protection circuit.
SKU: 514618 -
Raspberry Pi Case
Raspberry 4B Black Injection Molding Premium Case Supporting 3007 Fans
SKU: 1226956- Easy three-piece installation design.
- Easy fitment of Pi board.
- Case color: Black.
- Rubber pad grip at the bottom.
- Precise access to all port and cable strips.
- Injection Molded Construction.
SKU: 1226956 -
Case for Arduino
Transparent Blue ABS Plastic Case for UNO R3
SKU: 766385- Made of high-quality ABS plastic, provide good protective
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: 766385 -
Battery Pack Accessories & Holders
1 x 18650 Battery Holder with, 18.4MM Bore Diameter – pack of 4
SKU: 1121229- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1121229 -
RGB LED Strips and Drivers
5M Light Dance Party Decor Light Neon LED Lamp Flexible Rope Tube Waterproof LED Strip – Only EL Wire -WHITE
RGB LED Strips and Drivers5M Light Dance Party Decor Light Neon LED Lamp Flexible Rope Tube Waterproof LED Strip – Only EL Wire -WHITE
SKU: 1031032- Input Voltage:12 V
- Can offer 360 degrees of illumination
- Energy-saving, long lifetime
- Wire diameter:Â 2mm
- EL light length: 5M
- Lifetime: >12,000 hours
- Color: White
SKU: 1031032 -
Bluetooth and NRF Modules
HC-05 4pin Bluetooth Module(Master/Slave) with Button
SKU: 617819- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: 617819 -
Smart Vision Cameras
7mm 3 in 1 HD Android Mobile Phone Endoscope Camera with 1M Length Waterproof IP67 6 LEDs USB Inspection
Smart Vision Cameras7mm 3 in 1 HD Android Mobile Phone Endoscope Camera with 1M Length Waterproof IP67 6 LEDs USB Inspection
SKU: 1165415- Cable Length:1m
- Lens Diameter:7mm
- Resolution:7mm:640 * 480
- Camera Light Source:6 Adjustable LEDs
- Frames Per Second:30fps
- Viewing Angle:70°
- Waterproof Level: IP67
SKU: 1165415 -
Electronic Switches/Keypads Modules
TTP226 8-way Capacitive Touch Switch Module
SKU: 617807- Onboard 8 key TTP226 capacitive touch induction IC.
- Onboard 8-way level indicator.
- Working voltage: 2.4 to 5.5 V.
- Modules, you can set the output mode, key output mode, the longest time and fast/low power output
SKU: 617807 -
Voltage Regulator ICs
IC-LM2576S-12/NOPB
SKU: 1532813- 3.3-V, 5-V, 12-V, 15-V, and adjustable output versions
- Adjustable version output voltage range,1.23 V to
- 37 V (57 V for HV version) ±4% maximum over line and load conditions
- Specified 3-A output current
- Wide input voltage range: 40 V Up to 60 V for HV version
SKU: 1532813 -
-
Cooling Fans
DC24V 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50 x 50 x 15 mm
Cooling FansDC24V 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50 x 50 x 15 mm
SKU: 1187540- Model: R20XC
- USB Plug and Play.
- RFID reader 0-8cm Reading Distance.
- Win8/7/XP/Android Supported.
- S50/S70 Card Supported.
- OTG Phone Connection.
- Built-in buzzer and LED for identification.
SKU: 1187540 -
-
Cooling Fans
DC5V 0.25A 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187555- 45mm Radial Cooling fan.
- 5V 2-point Pin DC 0.25A.
- Type: Hydraulic
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187555 -
FPV Antennas and Trans-Receivers
915Mhz 100mW Mini Telemetry Kit
SKU: 674173- Very small size & Lightweight
- MAVLink protocol framing and status reporting
- Interchangeable air and ground modules
- Micro-USB port
- UART interface
- Error correction corrects up to 25% of bit errors
- Configurable through Mission Planner and APM Planner
- The demonstrated range of several kilometers with a small Omni antenna
SKU: 674173
