Generic
Showing 1297–1344 of 6087 results
-
Battery Protection Board
XH-M609 DC 12V-36V Charger Module Voltage Over Discharge Lithium Battery Protection Board
Battery Protection BoardXH-M609 DC 12V-36V Charger Module Voltage Over Discharge Lithium Battery Protection Board
SKU: 1269424- Model: XH – M609
- Power supply voltage:Â 12 V- 36 V battery
- Output voltage: Equal to power supply voltage
- Control precision: 0.1 V
- Power consumption: Less than 1.5 W
SKU: 1269424 -
Raspberry Pi Accessories
Ultra-thin Raspberry PI Routing Chip Radiator with 3M Adhesive Back Size: 30x40x5MM
Raspberry Pi AccessoriesUltra-thin Raspberry PI Routing Chip Radiator with 3M Adhesive Back Size: 30x40x5MM
SKU: 1150787- Product: Routing Chip Radiator
- Material: aluminum
- Color: Black
- Teeth Number: 7 rows and 14 columns
- Compatible with most Raspberry Pi cases
- Suitable for Auxiliary heat for Raspberry pi 2 model B/Raspberry Pi B+.
SKU: 1150787 -
-
Carbon Fiber Tubes and Rods
3K Roll-wrapped Carbon Fibre Tube (Hollow) 10mm(OD) * 8mm(ID) * 1000mm(L)
Carbon Fiber Tubes and Rods3K Roll-wrapped Carbon Fibre Tube (Hollow) 10mm(OD) * 8mm(ID) * 1000mm(L)
SKU: 653501- Made of Carbon Fiber material
- High Strength
- Stable dimension and UV resistant
- High Corrosion Resistance
- High Thermal Conductivity in some forms
- Low coefficient of thermal expansion
- Non-poisonous
SKU: 653501 -
Raspberry Pi Accessories
RTL8188 Mini USB wireless Network Card 300Mbps Wifi Dongle
SKU: 220437- Mini portable USB 2.0 design.
- Wireless N speed up to 300Mbps, ideal for internet surfing and online gaming.
- Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards.
- MIMO technology makes wireless transmission rates up to 600Mbps wifi antenna.
- 600Mbps Wireless Wifi USB Dongle/Wireless USB Adapter/Wireless Network Card
SKU: 220437 -
-
-
-
Linear Actuators
Linear Actuator Stroke Length 200MM,7mm/S,1500N,12V
SKU: 618168- Permanent magnet DC motor drive: Voltage 12VDC
- Self Locking Force: 1500N
- The current required to push 150KG is 1.5~2A
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: A service life of more than 50000 times.
SKU: 618168 -
-
Signal Generator Module & Oscilloscopes
SG-002 Analog 0-12V 0-24mA Signal Generator for PLC and Panel Debugging & Device Testing
Signal Generator Module & OscilloscopesSG-002 Analog 0-12V 0-24mA Signal Generator for PLC and Panel Debugging & Device Testing
SKU: 1187642- Power Supply: external micro USB-5V.
- Voltage Output: 0-12V.
- Current Output: 0-22mA.
- Multiple Display: Just push the small button to switch the display mode
- Product Dimension: 100mm x 70mm x 38mm
SKU: 1187642 -
-
Cable Splices
3mm Electrical Waterproof Seal Heat Shrink Splice Wire Sleeve White-Red 4pcs
SKU: 470836- Shrinkage ratio: 2:1.
- Tubing: Polyolefin.
- Operating temperature : -55℃ ~ 125℃.
- Minimum shrink temperature: 80℃.
- Starting temperature of solder melt: 138℃.
- Minimum full recovery temperature: 160℃.
SKU: 470836 -
-
-
Electronic Modules
DS1302 Real Time Clock Module (No Battery)
SKU: 766345The DS1302 trickle-charge timekeeping chip module with battery backup contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds,minutes, hours, day, date, month, and year information.
SKU: 766345 -
Breadboard and Zero PCBs
SYB-170 Mini Solderless Breadboard -170 Tie Points (Green, Yellow, Black) 3Pcs
Breadboard and Zero PCBsSYB-170 Mini Solderless Breadboard -170 Tie Points (Green, Yellow, Black) 3Pcs
SKU: 52916- Tie-points: 170 (10×17)
- Size: 48 x 35 x 10 mm(LxWxH).
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Phosphor bronze nickel plated spring clips
- Accepts a variety of wire sizes (29-20 the AWG)
SKU: 52916 -
Vibration/Tilt Sensor and Modules
801S Vibration Shock Sensor Module
SKU: 43743- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
SKU: 43743 -
Battery Pack Accessories & Holders
2 X 6 18650 Battery, Holder with 18.5MM, Bore Diameter
SKU: 1121237- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1121237 -
-
Drone Frame and Accessories
Z25 CNC Aluminum Folding Arm Tube Joint
SKU: 45572- Outer Diameter: 28 mm
- Inner Diameter: 25 ±3 mm(With adjustment screws)
- A 5-Degree up-tilt angle is applied
- This item suit for Auto Edition RC Quadcopter Hexacopter Multicopter
- Easy to use and 100% Brand New
- With Screws for Center plate installing usage.
- Weight: 84 gm
SKU: 45572 -
-
-
-
IoT WIFI Smart Switches
1 Channel RF Wireless ON/OFF Smart Switch with RF Remote Control
SKU: 1031166- Input: AC 220V-240V 50Hz/60Hz
- Launch battery: 12V 23A
- Incandescence lamp: ≤1000W
- Energy-saving lamp: ≤200W
- Number of energy-saving lamps: ≤6
- Compact fluoresce twin-tube: ≤280W
- Number of twin-tube: 6
- Remote control distance: 10M-50M
SKU: 1031166 -
-
-
-
6S Li-ion BMS
6S 40A 18650 Lithium Battery Protection Board
SKU: 618355- Maximum discharge current: 40A
- Instantaneous discharge current: 70A
- Charging voltage: 25.5V
- Maximum charging current: 40A
- Overcharge detection voltage: 4.25±0.025V
- Overcharge protection delay: 1.0±0.5S
- Overcharge release voltage: 4.15±0.05V
- Battery balance detection voltage: 4.125±0.025V
- Battery balance release voltage: 4.125±0.05V
- Battery balance current: 41±5mA
- Working current: ≤40uA
SKU: 618355 -