Search results: “e-bike pinion” – Page 195
Showing 9313–9360 of 9771 results
-
-
Coin Cell Battery
Maxell CR1216 3V Lithium Coin Battery (5 Pieces)
SKU: 1303721- High and Stable voltage (3V)
- A full line up for use in a wide variety of applications
- No mercury added
- Useful in a wide range of temperatures (-30°C to +60°C)
- Very high weight-to-power ratio
- Â Long Lasting life.
SKU: 1303721 -
L-Type DC BO Motors
100 RPM BO Motor – L Shape
SKU: 103841- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 1 Kgcm
SKU: 103841 -
Relay Modules
8 Road/Channel Relay Module (with light coupling) 24V
SKU: 31236- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: 31236 -
-
-
-
ARM Microcontroller
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ARM MicrocontrollerWaveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
SKU: 1858031- Model: Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor.
- Equipped with Xtensa 32-bit LX7 dual-core processor.
- Built-in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash.
Onboard 4.3-inch capacitive touch display, 800×480 resolution, 65K color. - Supports The Expansion Of Multiple Peripherals Via Sensor, CAN, RS485, And I2C Interfaces.
SKU: 1858031 -
Thermoelectric Peltier Elements
SP1848-27145 40x40mm Thermoelectric Power Generator TEG 150?C Peltier Module
Thermoelectric Peltier ElementsSP1848-27145 40x40mm Thermoelectric Power Generator TEG 150?C Peltier Module
SKU: 26317- Small and lightweight, convenient for use.
- Designed specifically for power generation.
- Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation.
- High-temperature 120°C, with NM static protection.
- Operating Temperature: 0-150°C
- Maximum Temperature: 150°C
- Open Circuit Voltage: 4.8V
SKU: 26317 -
Sensor ICs
ADXL345 LGA-14 3-axis Accelerometer
SKU: 162122- Power consumption scales automatically with bandwidth
- User-selectable resolution
- Patent pending, embedded memory management system with FIFO technology minimises host processor load
- Single tap/double tap detection
- Activity/inactivity monitoring
- Free-fall detection
- SPI (3- and 4-wire) and I2C digital interfaces
- Flexible interrupt modes map able to either interrupt pin
- Measurement ranges selectable via serial command
SKU: 162122 -
Battery Chargers, Battery Charging Boards
4 Port DC5V 1S RC Lithium Battery Compact Balance Charger for RC Quadcopter
Battery Chargers, Battery Charging Boards4 Port DC5V 1S RC Lithium Battery Compact Balance Charger for RC Quadcopter
SKU: 45831- Input voltage: DC 5V.
- As output voltage: 4.2V ± 5%.
- Output Current (mA): 350 ~ 490.
- Overcharge protection.
- Reverse polarity protection.
- Over-temperature automatic current regulation.
SKU: 45831 -
Battery Chargers, Battery Charging Boards
2S-6S Lipo Battery USB Converter T Plug Cellphone Charger Adapter
Battery Chargers, Battery Charging Boards2S-6S Lipo Battery USB Converter T Plug Cellphone Charger Adapter
SKU: 127285- Input: 6 to 26VDC (2S-6S LiPo Batteries)
- Output: 5V-2A DC
- Input Connector Type: T plug Male
- Output Interface: USB
- 7 Segment LED Display to monitor battery Voltage
- Anti-slip plug, good contact performance
- Precision display by TW programmed MCU
SKU: 127285 -
Parallel Charging Board
Battery Charger Board XT90 XT60 XT30 JST T Plug
SKU: 1395365- XT30 XT60 XT90 JST T Connector Lipo Parallel Charging Board.
- Supports 2-6S lithium battery charging and 2-6s extension parallel charging board
- Charge cable：14awg silicon cable which can stand with heavy current
- Multi-function charging board with XT30, XT60, XT90,T and JST plug in one board to meet almost kinds of batteries
- 4.0mm banana plug and XT60 plug,Compatible for Imax B6/B6AC ISDT HOTA etc chargers
SKU: 1395365 -
FFC, FPC, Berg connectors
1.5AW-1.5mm-4 pin Wafer Male Connector Through Hole Right Angle
SKU: R101346- MPN: 1.5AW
- BRAND: BOYU
- Supports 1A AC/DC and 50V AC/DC voltage ratings.
- Wide temperature range of -40°C to +85°C for versatile usage.
- Compatible with wire sizes ranging from AWG #32 to #28.
- Low contact resistance (20M max) and high insulation resistance (500M min).
- Withstands voltage up to 500V AC/minute for reliable performance.
SKU: R101346 -
ARM Microcontroller
STMICROELECTRONICS Discovery Kit, STM32F769NI MCU, On-Board ST-LINK/V2-1, 4″ Capacitive Touch LCD Display
ARM MicrocontrollerSTMICROELECTRONICS Discovery Kit, STM32F769NI MCU, On-Board ST-LINK/V2-1, 4″ Capacitive Touch LCD Display
SKU: 1470156- Product: STMICROELECTRONICS Discovery Kit, STM32F769NI MCU On-Board ST-LINK/V2-1, 4” Capacitive Touch LCD Display
- : STMicroelectronics
- : 32bit
- : STM32F7
- :Â ARM
SKU: 1470156 -
Sound Sensor
6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
Sound Sensor6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
SKU: 45833- Supply Voltage: 6-12VDC
- Frequency Range: 100-5500 Hz
- Output: 2.5Vpp/-25db
- Low noise
- High fidelity
- Wide working voltage range
- Low power consumption
- Long transmission distance
SKU: 45833 -
-
Carbon Fiber Tubes and Rods
3K Roll-wrapped Carbon Fiber Tube (Hollow)20mm(OD)*16mm(ID)*500mm(L)
SKU: 894413- Made of Carbon Fiber material
- High Strength
- Stable dimension and UV resistant
- High Corrosion Resistance
- High Thermal Conductivity in some forms
- Low coefficient of thermal expansion
- Non-poisonous
SKU: 894413 -
Flight Controller & Accessories
DJI NAZA M V2 Multirotor Autopilot Controller set with GPS
SKU: 45468- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
- Supported ESC Output 400 Hz refresh frequency
- Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
- Power Consumption MAX: 1.5 W (0.3 A at 5 V)
- Operating Temperature: -10 to 50°C
SKU: 45468 -
GPS Modules
CUAV NEO 3 GPS Module | GNSS U-blox M9N Drone Hardware
SKU: 1504853- Version V5+ / X7 / Nora
- Buzzer prompt
- safety switch
- UART+IO+I2C
- MS5611 Barometer
- RGB Status Light
- CROCOMM custom four-star high gain antenna
- Simultaneous reception by the four satellite systems: Supports simultaneous reception of Beidou, Galileo, Glonas, and GPS four satellite systems
SKU: 1504853 -
-
-
Drone Frame and Accessories
EFT Camera Fixtures EP/Compatible with All Drone Frames (1Pcs)
SKU: 1728603- Easy to use
- Good quality product
- Fixture Type: EP camera fixture, one piece included.
- Compatibility: Designed to be compatible with all drone frames.
- Purpose: Intended as a mounting or fixing point for attaching cameras or related equipment to various drone models, ensuring stability and secure placement during flight or operation
SKU: 1728603 -
-
-
-
Drone Frame and Accessories
EFT G20Â 22L 8 Axis Agriculture Drone Frame
SKU: 1713731- Model: EFT G20 22L 8 Axis Agriculture Drone Frame.
- One-Piece Body.
- Symmetrical Eight-Axis Layout.
- Quick-Release Double Battery + Double Tanks.
- Achieves accurate height-fixing ground imitation and obstacle avoidance with optional lower-mounted radar.
- Optional Y-Shaped Extension Nozzles.
SKU: 1713731 -
Drone Frame and Accessories
EFT G410Â 10L 4 Axis Agriculture Drone Frame
SKU: 1713732- 10L tank capacity with plug-in battery system
- Durable integral frame design
- Cross-folding structure for easy transport
- Equipped with obstacle avoidance and altitude radar
- IP65 dustproof and waterproof rating
- Dual-functionality: spraying and spreading
SKU: 1713732
