The Flight Controller (FC) serves as the brain of the aircraft, equipped with sensors to detect drone movements and user commands. It processes this data to precisely control the motor speed, enabling the drone to maneuver as directed.
Discover a diverse range of Quadcopter Flight Controllers at Robu. Our affordable and high-quality flight controllers are essential for drone enthusiasts. The extensive selection of FCs for FPV drones can be overwhelming, especially for beginners. Leave the task of choosing the right FC to us and enjoy your flight without worries. We are dedicated to providing FCs that continually evolve, becoming more compact, integrating advanced features, and utilizing superior processors and hardware. Trust us for your flight control needs.
Flight Controller & Accessories
Showing 1–48 of 166 results
-
Flight Controller & Accessories, Interfacing Cables
DF13 4 Pin Flight Controller Cable
SKU: 58221- Item Name: DF13 4 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 4 pin
- Length: 200mm(28AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: 58221 -
-
Flight Controller & Accessories, Interfacing Cables
DF13 6 Pin Flight Controller Cable
SKU: 58194- Item Name: DF13 6 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 6 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: 58194 -
-
-
Drone Accessories, Flight Controller & Accessories
SP RACING F3 FC Replacement Accessories Set
SKU: 58032Accessories compatible with SP RACING F3 Flight Controller Module
High-quality cable and connectors.
1 x 3*8 Burg connector(Straight)
1 x 3*8 Burg connector(Right-angle)
1 x 1*10 Burg Connector(Straight)
2 x 2pt cable
2 x 4pt cable
2 x 8pt cableSKU: 58032 -
Drone Accessories, Flight Controller & Accessories
Pixhawk I2C Port Expand Board with Cable
SKU: 29000- Package Weight: 5 gmÂ
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 3g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
SKU: 29000 -
Flight Controller & Accessories
Mini USB (90° Connector) to FPV AV Output Cable for GoPro Hero 3
SKU: 29366- USB connector is used to connect to the USB port on your GoPro Hero3 Camera.
- The 3 pin female connector is for AV video output
Typical application:
Video output from your GoPro Hero 3 USB port to your video wireless transmitter. (Connect your GoPro Hero 3 directly to FPV transmitter)
SKU: 29366 -
Flight Controller & Accessories
Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC (2.54 mm Dupont)
SKU: 1735921- Product: Pixhawk PWM Cable for Tekko32 4in1 ESC
- For Use With: Durandal, Pixhawk 32 v6 & V5, Pixhawk 4 Mini, Pixhawk 6C Mini, Pixhawk 6X/5X Standard
Baseboard or RPI CM4 Baseboard - Cable Length (cm): 20
- Connector: 2.54mm Dupont to JST SHR 8Pin
- Cable Size (AWG): 28
SKU: 1735921 -
Flight Controller & Accessories
Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC (GHR 10 Pin)
SKU: 1735923- Product: Pixhawk PWM Cable for Tekko32 4in1 ESC
- For Use With: Pixhawk 4, Pixhawk 6C, Pixhawk 6X/5X with Mini Baseboard
- Cable Length (cm): 20
- Connector: JST GHR 10Pin to JST SHR 8Pin
- Cable Size (AWG): 28
SKU: 1735923 -
-
Flight Controller & Accessories
Micro Minim OSD For Racing F3 Naze32 Flight Controller RC Drone
SKU: 29457- ATmega328P with Arduino bootloader.
- MAX7456 monochrome on-screen display.
- +5V 500mA regulator for up to +12V supply input.
- FTDI cable compatible pinout.
- The standard 6-pin ISP header.
- Standalone, or with APM/ Flip / Flip32+ flight controllers.
SKU: 29457 -
Flight Controller & Accessories
Whoop Lite F3 Mini Brushed Flight Controller
SKU: 974877- CPU: STM32F030
- Six-Axis: MPU6050
- Firmware version: Silverware firmware
- Power Cable: 55mm, with JST-PH 2.0 connector
- ESC: All FETs are rated at 6A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
- Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
SKU: 974877 -
Flight Controller & Accessories
Naze32 6DOF Flight Control board
SKU: 29592- Battery voltage monitoring.
- Built-in FrSky telemetry converter.
- Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
- Onboard USB for setup and configuration.
- Modern GUI for all operating systems, Baseflight Configurator.
SKU: 29592 -
Flight Controller & Accessories
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
Flight Controller & AccessoriesF3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
SKU: 45650- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Run on SP RACING F3 EVO firmware 32 brush flight control
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: 45650 -
-
Flight Controller & Accessories
Mini OSD for Pixhawk Flight Controller
SKU: 57684- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6 pin ISP header
- 2 independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections
Compatible flight controller:
APM2.5/2.6/2.8
Pixhawk PX4SKU: 57684 -
Flight Controller & Accessories
Naze32 10DOF Flight Control Board
SKU: 29597- Axis: 2000 degrees/second 3-axis MEMS gyro.
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Built-in FrSky telemetry inverter (shared w/main port).
- A modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
- Onboard MicroUSB for setup and configuration.
- Multi WiFi-based configuration software for easy setup.
SKU: 29597 -
Flight Controller & Accessories
F3 EVO V2.0 Flight Control
SKU: 674161- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: 674161 -
Flight Controller & Accessories
OpenPilot CC3D EVO Flight Controller Straight Pin
SKU: 50818- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
SKU: 50818 -
Flight Controller & Accessories
Naze 32 Full REV6 Flight Controller with Compass & Barometer
SKU: 57248- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500).
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Fully pinout compatible with rev5 accessories (OSDoge etc).
- SBUS Inverter.
- Sonar pads w/resistors added for direct connection to 5V sonar.
- MS5611Â barometer.
- 128mbit flash.
SKU: 57248 -
Flight Controller & Accessories
FMS RC Airplane Gyro Reflex Flight Control System
SKU: 1119191- Suitable For FMS 1.2M Ranger Plane.
- Utilizes a high-speed 32-bit ARM processor onboard.
- 3 axis gyro and 3 axes accelerometer.
- Size: 26.0mm x 34.5mm x 14.5mm
- Weight: 14.5g ( Whole Unit with wire )
SKU: 1119191 -
-
Flight Controller & Accessories
Omnibus F4 V2 PRO Flight Controller with Built-in OSD
SKU: 61182- STM32 F405 MCU
- Runs Beta flight (3.0.1 and up)
- Race light and D-ronin firmware
- SBUS/PPM input (Pinheaders)
- 6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
- Only 36x36mm, mount holes 30.5×30.5mm
- SPI Sensor MPU6000
- 128Mbit Flash
SKU: 61182 -
Flight Controller & Accessories
Kakute F4 Flight Controller
SKU: 1104558- MCU: STM32F405RGT6Â 32-bit processor
- IMU: ICM20689 (SPI)
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 3 hardware UARTS (UART1,3,6)
- 128 Mbit Dataflash chip for Blackbox logging
- 5v Power Out: 1.5 A max
- 3.3v Power Out: 200 mA max
SKU: 1104558 -
Flight Controller & Accessories
SP Racing F3 Flight Controller ACRO Version
SKU: 45626- The STM32F3 CPU, MPU 6050 sensor, 16M high-capacity flash memory, OSD function.
- The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
- Tiny and lightweight, the Racing F3 has a standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 6 grams.
- Flight Logging, on-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without guesswork.
- OneShot ESC, full support for OneShot ESCs for easy PID tuning and a sharper response.
- Broad RC receiver supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers, no external inverters required (built-in).
SKU: 45626