Raspberry Pi Hats
Showing 97–111 of 111 results
-
Raspberry Pi Hats
Raspberry Pi GPIO UART HAT / Shield V1.0
SKU: 815864- Onboard Power Indicator Lamp
- Onboard Infrared Receiving Function
- GPIO Expansion Function:
- 16 independent GPIO with power and ground (3.3V level)
- 2 Independent SPI expansion interface and 1 I2C expansion interface
- 1 standard RS232 serial port: can directly connect with PC etc.
SKU: 815864 -
-
Raspberry Pi Hats
Raspberry PI IQ Audio DGAmp+
SKU: 910638- HAT compliant accessory; EEPROM, mounting holes
- Full-HD audio – up to 24-bit/192kHz playback
- Up to 2x35w of crystal clear amplification
- No soldering required to your Raspberry Pi
- ound card – access to gpio yes
- Sound card – type amp
SKU: 910638 -
Raspberry Pi and Accessories on Sale, Raspberry Pi Hats
Raspberry Pi X400 Multifunctional Expansion Board
-27%Raspberry Pi and Accessories on Sale, Raspberry Pi HatsRaspberry Pi X400 Multifunctional Expansion Board
SKU: 815866- Built in High quality Class-D stereo audio amplifier (TI TPA3118D2)
- AMP can be enabled / disabled via jumper
- 3.5mm stereo audio jack
- Built in High quality audio headphone amplifier (TI TPA6133A)
SKU: 815866 -
Raspberry Pi and Accessories on Sale, Raspberry Pi Hats
Raspberry PIIQ Audio Codec Zero
SKU: 910637- Green (GPIO23) and red (GPIO24) LEDs as status indicators.
- It supports a range of input and output devices from built-in MEMS microphones.
- The Codec Zero makes a great starting point for a walkie-talkie.
SKU: 910637 -
Raspberry Pi Hats
SmartElex 10D DC Motor Driver HAT for Raspberry Pi
SKU: 128421- Wide 6V to 28V motor Operating Voltage.
- Continuous 10A maximum current without Heatsink and 30A peak current for 10 Seconds.
- Two brushed DC motor Bidirectional control.
- Current limiting at 35A.
- PWM frequency up to 32KHz
- Support TTL PWM from the microcontroller
- Internal thermal shutdown
- Under-voltage lockout
- PWM and direction controlled driving of four externally powered NMOS transistors
- 3V and 5V logic level input.
SKU: 128421 -
Raspberry Pi Hats
SmartElex GPS HAT for Raspberry Pi
SKU: 124975- High Tracking and Acquisition sensitivity
- The multi-GNSS engine for GPS, GLONASS, Galileo, and QZSS
- 99 acquisition channels, 33 tracking channels.
- Balloon mode, for high altitude up to 80km.
- PPS VS. NMEA can be used for time service.
- Support SDK command developed by Quectel.
- Automatic antenna switching function.
- Built-in Real Time Clock (RTC)
- PPS output on a fix.
- Internal patch antenna
- Fix status LED blinks to let you know when the GPS has determined the current coordinates.
- Great anti-jamming performance
SKU: 124975 -
GSM / GPRS Modules, Raspberry Pi Hats
SmartElex GSM HAT for Raspberry Pi
SKU: 132520- Based on the Quectel M66 Module
- Send/Receive SMS
- Make/Receive voice call with 3.5mm audio jack.
- Quad-band module (850/ 900/ 1800/ 1900MHz).
- Include Onboard Bluetooth BT 3.0 with an antenna.
- Controlled via AT commands.
- Compatible with all Raspberry Pi Version
- Autobauding 4800bps to 115200bps.
SKU: 132520 -
Raspberry Pi Hats
Stepper Motor HAT V2.0 Shield for Raspberry Pi Zero/3B+/4B
SKU: 815872- Wide 5V to 12V Operating Voltage.
- Four Brushed DC Motor Bidirectional Control.
- Two Stepper Motor Control.
- Maximum Peak Current 3A
- PWM frequency up to 32KHz
- Support TTL PWM from the microcontroller
- Thermal Shutdown Protection
SKU: 815872 -
-
Raspberry Pi Hats
Waveshare USB to Serial Port Expansion Board HUB
SKU: 890246- 4 USB Ports, Compatible with USB2.0/1.1
- Onboard USB to UART, with enable/disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict
- Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
SKU: 890246