Sensors Modules
Showing 145–192 of 1626 results
-
Water TDS, pH, Flow, Level and Pressure Sensor
YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate – White
Water TDS, pH, Flow, Level and Pressure SensorYF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate – White
SKU: 12219- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
- Max current draw: 15mA @ 5V.
- Working Flow Rate: 1 to 30 Liters/Minute.
- Maximum water pressure: 2.0 MPa.
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
SKU: 12219 -
Gas and Dust Sensor
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
SKU: 44007- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
SKU: 44007 -
Environmental Sensors
Three-Way Soil Meter For Moisture, Light Intensity and pH Testing Meter
SKU: 130288- Three different soil test meters in one device; Measures moisture, pH/Acidity, and light.
- Â 100% Accuracy; Easy to read moisture, pH and light levels; Perfect monitor for growing healthy plants.
- Â Takes the guesswork out of gardening; Know exactly when to water, amend your soil or adjust lighting.
- Compact, portable & easy to use, just plug and use; Compact soil meter works indoor/outdoors.
- Save water, energy and keep your plants, lawn, flower in top condition.
- Measures moisture at root level.
- No battery required, simple and convenient to use.
SKU: 130288 -
Temperature & Humidity Sensor
K-type Thermocouple
SKU: 1320794- Product: K-type Thermocouple
- Tolerance: ± 1.5
- Operating temperature: up to 2000°C
- Thermocouple length: 110cm
- Operating Voltage(VDC): 3 to 5.5
- Internal integrated cold junction compensation circuit
- With a simple three-serial SPI interface
SKU: 1320794 -
-
Best Prices, Temperature & Humidity Sensor
MAX31865 PT100-PT1000 RTD Platinum Resistance Temperature Detector Module
-54%
Best Prices, Temperature & Humidity SensorMAX31865 PT100-PT1000 RTD Platinum Resistance Temperature Detector Module
SKU: 890201- Integration Lowers System Cost, Simplifies Design
- Efforts, and Reduces Design Cycle Time
- High Accuracy Facilitates Meeting Error Budgets
- 15-Bit ADC Resolution; Nominal Temperature
- Resolution 0.03125NC (Varies Due to RTD Nonlinearity)
- Total Accuracy Over All Operating Conditions:
SKU: 890201 -
RFID card, Tags & Reader
JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader
SKU: 43434- Frequency:Â 125Khz.
- Support μEM4001, 4100, or its compatible RFID, ID card.
- Read first 10 digits of the RFID/Proximity card.
- Support Windows95/98/2000/XP/7/8.
- Plug and Play
- Reliable working condition
- Powered directly from USB, no need external power supply
SKU: 43434 -
-
Rotary Encoder
OE-28 Hall Effect Two Channel Magnetic Encoder
SKU: 300738This encoder is featured and developed for the series of Orange planetary DC gear motors. The encoder are tested for its precise output and robustness in all electronic as well as environmental parameters listed. So If you wish to add feedback to older or new gear motors this encoder will do the trick as long as your Motor has a long back shaft.
SKU: 300738 -
Light/color Sensor
TCS3200 Color Recognition Sensor Module for MCU Arduino
SKU: 12229- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
SKU: 12229 -
-
-
Biometric/ECG/EMG Sensor
ECG GEL ELECTRODE (3M) Pack of 5
SKU: 6326- Good electrical characteristics
- Different base materials, sizes, and connections
- Monitoring electrode with foam tape and radiolucent stud.
- ECG Electrode with convenient abrader.
- ECG Electrode for monitoring applications requiring high adhesion.
- Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact.
- Remains fresh for 30 days out of the bag.
SKU: 6326 -
Other Ultrasonic Sensors
EasyMech Snap-fit ABS Cartoon Bracket with HC-SR04 Ultrasonic sensor
SKU: 720739- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 4500 cm
- Frequency: 40 kHz
- Thickness: 2.8-3.1 mm
- The diameter of mounting hole: 3.0mm
- Mounting Bracket Material: Plastic
SKU: 720739 -
-
-
Light/color Sensor
CJMCU-34725 TCS34725 Color Sensor RGB Module
SKU: 62228- Operating Voltage: 3.3V
- Supply Voltage: 3.3V-5V
- The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing
- Color management is more accurate.
- The high sensitivity.
- Wide dynamic range.
- IR shading filters make the TCS3472 ideal.
SKU: 62228 -
-
-
-
Gas and Dust Sensor
MQ-3 Alcohol Detector Gas Sensor Module
SKU: 29770- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output:Â 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
SKU: 29770 -
Gas and Dust Sensor
PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor
SKU: 28624- Power supply voltage: DC5 ± 2V
- Sensitivity: 0.5V / (0.1mg / m3)
- The minimum detection level of particles: 0.8 m
- Clean air voltage: 0.9V typ.
- Low consumption current (Icc: MAX. 20 mA)
- The presence of dust can be detected by the photometry of only one pulse
- Enable to distinguish smoke from house dust
SKU: 28624 -
-
Light Dependent Resistors (LDR), Light/color Sensor
12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
Light Dependent Resistors (LDR), Light/color Sensor12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
SKU: 611822- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70ËšC (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
SKU: 611822 -
-
LiDAR Sensor
TFMini-S Micro LiDAR Distance Sensor for Drones UAV UAS Robots (12m) UART
SKU: 715935- Operating Range is 0.1 ~ 12m
- Supply Voltage – 5V
- Frame Rate is 10 – 1000Hz
- Operating Temperature is 0℃~60℃
- Communication Interface –UART/I2C
- Accuracy – ±6cm@（0.1-6m), ±1%@（6m-12m）
- FOV – 2°
SKU: 715935 -
Rotary Encoder
Correlation Photoelectric Infrared Count Slot Sensor Module 10 mm
SKU: 835790- The width of the optical coupling slot: 10mm
- Single signal output.
- The circuit board output switch!
- The output valid signal is low.
- Can be used for workpiece counts.
- It can also be used for industry counting, motor speed testing.
SKU: 835790 -
Thermoelectric Peltier Elements
SP1848-27145 Thermoelectric Power Generator/Thermocooler Peltier Module
Thermoelectric Peltier ElementsSP1848-27145 Thermoelectric Power Generator/Thermocooler Peltier Module
SKU: 26609- Small and lightweight, convenient for use.
- Designed specifically for power generation.
- Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation.
- High-temperature 120°C, with NM static protection.
- Operating Temperature: 0-120°C
- Maximum Temperature: 120°C
- Open Circuit Voltage: 4.8V
SKU: 26609 -
-
Load / Pressure / Force / Flex Sensor
Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Load / Pressure / Force / Flex SensorWeighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
SKU: 28643This straight bar load cells (sometimes called a strain gauge) can translate up to 5 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.
SKU: 28643 -
LiDAR Sensor
SLAMTEC RPLiDAR A1M8 360 Degree Laser Range Finder – 6m (Radius Range)
SKU: 134289- Distance Range (Radius): 0.15m to 6m, white objects (Diameter Range – 12m)
- Angular Range: 0 ~ 360º
- Distance Resolution: < 0.5mm
- Angular Resolution: <= 1 º
- Sample Duration: 0.5 ms
- Sample Frequency: >=8000 Hz
- Scan Rate: 1 ~ 10Hz, Typical 5.5Hz
SKU: 134289 -
Water TDS, pH, Flow, Level and Pressure Sensor
Analog TDS Sensor Module Normal Quality
SKU: 890181- Wide voltage operation: 3.3~5.5V
- 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
- The excitation source is an AC signal, effectively preventing probe polarization
- Waterproof probe for long-term immersion in water
SKU: 890181 -
Current and Voltage Sensor
SCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor
Current and Voltage SensorSCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor
SKU: 43399- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Meet UL94-V0 flame retardant properties
SKU: 43399 -
-
Sensor Kits
37 in 1 Sensors Kit compatible with Arduino
SKU: 31812- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
SKU: 31812 -
-
-
-
-
![SHARP IR Distance Measuring Sensor Unit 4 ~ 30 cm With Cable-[GP2Y0A41SK0F]](https://robu.in/wp-content/uploads/2017/09/ir-distance-sensor-sharp-gp2y0a41sk0f-7467-314x252.jpg)
