Multirotors
Showing 1–48 of 114 results
-
-
-
Drone Frame and Accessories
Z30 Aluminum Folding Arm Tube Joint (Round Head Double screw)
SKU: 1415724- Outer Diameter: 35 mm
- Inner Diameter: 30 ±3 mm(With adjustment screws)
- A 5-Degree up-tilt angle is applied
- This item suit for Auto Edition RC Quadcopter Hexacopter Multicopter
- Easy to use and 100% Brand New
- With Screws for Center plate installing usage.
- Weight: 84 gm
SKU: 1415724 -
Flight Controller & Accessories
Kakute F4 Flight Controller
SKU: 1104558- MCU: STM32F405RGT6Â 32-bit processor
- IMU: ICM20689 (SPI)
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 3 hardware UARTS (UART1,3,6)
- 128 Mbit Dataflash chip for Blackbox logging
- 5v Power Out: 1.5 A max
- 3.3v Power Out: 200 mA max
SKU: 1104558 -
-
Drone Transmitter and Receiver
FS-TH9X 2.4GHz 9CH Transmitter with FS-R9B Receiver
SKU: 661724- Transmitter: FS-TH9X Upgrade with FS-RM002 2.4GHz Module
- Receiver: FS-R9B(8 Channel)
- Communication range(Drone to Remote):700m(in open space)
- Default Mode: Mode-2
- Input Power: 12V DC (1.5V x 8Â AAA Battery)
- Bidirectional System
- Frequencies-Hopping
- Omni-directional High Gain Antenna
- Low Power Consumption
SKU: 661724 -
-
Drone Transmitter and Receiver
FlySky FS-IA10B Radio Receiver
SKU: 127296- No. of Channels: 10
- Model Type: Fixed-Wing/Glider/Helicopter
- RF Range: 2.4055-2.475GHz
- RF Channel: 140
- RF Receiver Sensitivity: -105dBm
- Bandwidth: 500KHz
- 2.4GHz System: AFHDS 2A
- Modulation Type: GFSK
- Oprating Voltage: 4.0-6.5V DC
SKU: 127296 -
Drone Accessories
A set of 4 Motor Cap Guard for DJI Spark Drone Motor
SKU: 127278These DJI Spark skins offer an ultra-slim fit that protects your device against bumps, scratches, small drops, dust, and dirt. Better yet, it won’t take up space in your bag or your purse and ensures your DJI Spark looks truly original.
SKU: 127278 -
Drone Accessories
75cm Diameter Fast-fold Landing Pad/ Helipad for RC Drone
SKU: 127289- Â High-quality Nylon Waterproof Material
- High precision printing
- Waterproof, Sun-protection, Not easy color fading
- Double side double color design
- Highlight the location of the Helipad with an illuminance
- Specialty Carrying bag
SKU: 127289 -
Drone Accessories
DC-DC Converter Step down Module 3A 5V Mini UBEC for RC Plane
SKU: 119345- Suitable for: RC AirPlane Multirotor helicopter
- Input voltage: 2-6S
- Output Current: constant 3A
- Output Voltage: 5V
- The UBEC is ideal to provide FPV cameras and brushless gimbals with a constant 5V voltage.
- Special for FPV image transmission
SKU: 119345 -
FPV Cameras
RunCam Eagle 2 Pro 800 TVL FPV Camera
SKU: 87854- High image quality with 1/1.8 inch CMOS sensor, Global WDR
- 16:9 / 4:3 aspect ratioandNTSC / PALÂ can be switched via OSD menu
- Integrated OSD and MICÂ for immersive FPV racing
- Supports 5 – 36V wide input voltage for both small or big multirotors
- Day/Night Auto/External/Color/B&W
SKU: 87854 -
Drone Transmitter and Receiver
FS-SM600 6CH USB Powered Controller with SuperSimX Simulator (Mode 2)
SKU: 79979- Operating Voltage (VDC):12
- No. of Channels:6
- Antenna Length (mm):26
- Certificate: CE
- Code Type:Digital
- Color:Black
- DSC Port:No
- Default Operating Mode:Mode 2 (Left-Hand Throttle)
- Cable Length:1 Mtr.
SKU: 79979 -
-
Drone Transmitter and Receiver
Flysky FS-GT2 Transmitter with FS-GR3E Receiver for Rc Car/Boat
SKU: 79623- Operating Voltage (VDC):12
- No. of Channels:2
- Antenna Length (mm):26
- Certificate: CE
- Charging Port: Yes
- Code Type: Digital
- DSC Port: Yes(3.5mm)
- Modulation Type:GFSK
- RF Power:Less Than 20 dBm
- Sensitivity (dBm):1024
SKU: 79623 -
-
Drone Frame and Accessories
PDB-XT60 with BEC 5V and 12V
SKU: 57854- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- Regulated 5V and 12V outputs
- Short circuit tolerantInput voltage range: 9 – 18V DC (3S-4S LiPoly operation)
- Output continuous current:Â 25Ax4 or 15Ax6
- Output Peak current (10 seconds/minute):Â 30Ax4 or 20Ax6
- Short-circuit tolerant:Â 5 seconds/minute
SKU: 57854 -
Drone Motor
2312 920KVR Brushless DC Motor for Drone (CW Motor Rotation)
SKU: 57794- Motor KV: 920 (RPM/V)
- No-Load Current (Io/10V): 0.45 Amps
- Li-PO Batteries: 2S-4S
- Motor Resistance (Rm): 0.117 Ohms
- Max Continuous Current: 14 Amps
- Max Power: 220 Watts
- Shaft Diameter: 8mm (Unthreaded) & 6mm (Threaded)
SKU: 57794 -
-
Drone Transmitter and Receiver
FS-RX2A Pro Radio Receiver
SKU: 57666- Item name: FS-RX2A Radio receiver
- Channel: 10
- RF Range: 2.408-2.475GHZ
- Number of bands: 135
- RX Sensitivity: -92dBm
- 2.4GHz protocol: AFHDS 2A
- Signal output: IBUS, PPM
- Compatible Transmitter: All AFHDS 2A Transmitter,
- Ex.: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10.
SKU: 57666 -
Drone Transmitter and Receiver
X6B 2.4G 6CH i-BUS PPM PWM Receiver for AFHDS
SKU: 57636- Channels: 6(PWM), 8(PPM), 18(i-BUS)Model
- DSC port: PPM/PWM/i-BUS
- Dual Antenna
- Range: >300m
- Weight: 12 gm(Whole assembly)
- Compatible Transmitter: All AFHDS 2A Transmitter, for example, FS-i10 FS-i6, FS-i6S, FS-i6X, FS-i4, FS-i4X.
SKU: 57636 -
-
-
Drone Transmitter and Receiver
FS-IA6 6CH AFHDS 2A 2.4G Radio Receiver
SKU: 57462- Channels: 6 Channels
- Model type: Airplane / Glider / Helicopter / Multirotor
- Frequency range: 2.4–2.48GHZ
- Bandwidth number: 160
- Transmitting power: not more than 20dBm
- RF receiver sensitivity: -105dbm
- 2.4G modes: automatic frequency second generation digital systems
- Encoding: GFSK
- Data acquisition interface: None
SKU: 57462 -
FPV Antennas and Trans-Receivers
RC832 Plus 5.8G 48CH Wireless AV Receiver
SKU: 57268- Operating Voltage: 12VDC
- Working current:Â 200mA max.
- Video format:Â NTSC/PAL auto.
- Control Range: Approx 5 KM
- 48 channels: Cover A, B, E, F, HÂ bands and L bands.
- Â Power off memory for last channel and band.
- Â Dual Independent video and audio signal outputs.
SKU: 57268 -
-
-
Drone Transmitter and Receiver
FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
SKU: 47628- Bandwidth (KHz): 500.
- RF Range (GHz): 2.40 ~ 2.48.
- No. of channels: 6.
- Remote controller weight (gm): 400.
- Power: 6V (1.5V AA*4).
- Antenna Length: 26mm * 2 (dual antenna).
- Transmitting Power: ≤ 20dBm.
- RF Receiver Sensitivity: -105dbm.
SKU: 47628 -
-
-
-
-
-