MiNi ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC

Availability:

Out of stock - Join the waitlist to be emailed when this product becomes available


SKU: 43775
  1. Fully Compatible with 10/100/1000Base-T Networks
  2. Integrated MAC and 10Base-T PHY
  3. Supports One 10Base-T Port with Automatic Polarity Detection and Correction
  4. Supports Full and Half-Duplex modes
  5. Programmable Automatic Retransmit on Collision
  6. Programmable Automatic Rejection of Erroneous Packets
  7. SPI Interface with Clock Speeds Up to 20 MHz
  8. For Arduino, SPI, AVR, PIC, LPC, STM32.

 699.00

(inc GST)

₹ 592.37 (+18% GST extra)

Out of stock - Join the waitlist to be emailed when this product becomes available

Category: Interface Module
Tags: Arduino, SPI, HanRun, Ethernet, ENC28J60, PIC, AVR

The MiNi ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI.

ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 a popular Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. This Ethernet LAN module connects directly to most microcontrollers.

The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32.

The ENC28J60 consists of seven major functional blocks

1. An SPI interface that serves as a communication channel between the host controller and the ENC28J60.
2. Control registers which are used to control and monitor the ENC28J60.
3. A dual port RAM buffer for received and transmitted data packets.
4. An arbiter to control the access to the RAM buffer when requests are made from DMA, transmit and receive blocks.
5. The bus interface that interprets data and commands received via the SPI interface.
6. The MAC (Medium Access Control) module that implements the IEEE 802.3 compliant MAC logic.
7. The PHY (Physical Layer) module that encodes and decodes the analog data that is present on the twisted-pair interface.


Features :

  1. Fully Compatible with 10/100/1000Base-T Networks
  2. Integrated MAC and 10Base-T PHY
  3. Supports One 10Base-T Port with Automatic Polarity Detection and Correction
  4. Supports Full and Half-Duplex modes
  5. Programmable Automatic Retransmit on Collision
  6. Programmable Automatic Rejection of Erroneous Packets
  7. SPI Interface with Clock Speeds Up to 20 MHz
  8. The board 25MHZ crystal.
  9. Programmable Padding and CRC Generation
  10. The network interface board HR911105A.
  11. 3.3 V power supply pin.
  12. Stable performance.
  13. For Arduino, SPI, AVR, PIC, LPC, STM32.

Package includes :

1 x Mini ENC28J60 Ethernet LAN Network Module

Brand

HanRun

IC Chip

ENC28J60/SS

Length (mm)

52

Width (mm)

20

Height (mm)

16

Weight (gm)

20

Shipment Weight

0.022 kg

Shipment Dimensions

6 × 3 × 2.5 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MiNi ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC”

There are no reviews yet.

ENC28j60 Datasheet

ENC28J60 Driver

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions

You may also like…