motor
Showing all 15 results
-
Drone Motor
DYS D3536-9 910 KV BLDC Motor
SKU: 1115429- Battery:Â 2~4 Cell /7.4~14.8V
- RPM: 910kv
- Max current: 25.5A
- No load current: 1.5A
- Max power: 370W
- Internal resistance: 0.063 ohm
- Weight: 102g (including connectors)
- Diameter of shaft: 5mm
- Dimensions: 35x36m
- Prop size: 7.4V/12×5 14.8V/10×7
- Max thrust:Â 1050g
SKU: 1115429 -
-
-
-
-
-
Orange Square Gear Box Motor
Orange MG555 12V 100RPM Square Gearbox DC motor For DIY Project Encoder Compatible
Orange Square Gear Box MotorOrange MG555 12V 100RPM Square Gearbox DC motor For DIY Project Encoder Compatible
SKU: 542617- Rated current (mA): ≤3600.
- Rated power (W): 7.836.
- Rated Torque (N-cm): 77.4
- Rated speed: 90 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 6000.
- Back shaft for Encoder Available
- Gear Ratio: 55K.
SKU: 542617 -
Orange Square Gear Box Motor
Orange MG555 12V 150RPM Square Gearbox DC motor For DIY Project Encoder Compatible
Orange Square Gear Box MotorOrange MG555 12V 150RPM Square Gearbox DC motor For DIY Project Encoder Compatible
SKU: 542618- Rated current (mA): ≤1500.
- Rated power (W): 10.810.
- Rated Torque (N-cm): 73.4
- Rated speed: 140 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 6000.
- Back shaft for Encoder Available
SKU: 542618 -
-
Metal Gear Box Motor
100RPM 12V LOW NOISE DC MOTOR WITH METAL GEARS – GRADE A
SKU: 1137796- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2.9
- Stall Torque(kg-cm): 11.4
SKU: 1137796 -
BO motors
60 RPM BO Motor – Straight
SKU: 25339- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 60 RPM
- Rated Torque: 1 Kgcm
SKU: 25339
