DF Robot
Showing 145–192 of 235 results
-
Gas and Dust Sensor
DFRobot Gravity CO Sensor (Calibrated) – I2C & UART
SKU: 1209994- ejection Gas: Carbon Monoxide (CO).
- Detection range: 0-1000ppm.
- Working Voltage: 3.3~5.5V DC.
- Working Current: <5mA.
- Output Signal: I2C, UART (0~3V), analog voltage.
- Working Temperature: -20~50℃.
- Working Humidity: 15~90%RH (non-condensing).
- Compatibility: Arduino, ESP32, Raspberry pi.
- Petrochemical carbon monoxide detection.
SKU: 1209994 -
Development Boards
DFRobot Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device (Supports BLE, Battery Charging)
Development BoardsDFRobot Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device (Supports BLE, Battery Charging)
SKU: R110738- Processor: RISC-V single-core processor
- Main Frequency: 160 MHz
- Operating Voltage: 3.3V
- Type-C Input Voltage: 5V DC
- Operating Temperature: -10~60℃
- ROM: 320KB
- Flash: 4MB
SKU: R110738 -
Gas and Dust Sensor
DFRobot Fermion MEMS Ethanol EtOH Gas Detection Sensor (Breakout, 1-500ppm)
SKU: 1680987- Compact size, measuring only 13*13*2.5mm
- Low power consumption, operating current <20mA
- High sensitivity and rapid response recovery
- Advanced MEMS technology
- Gas detected: Ethanol (EtOH)
- Sensitivity: R0(in air)/Rs(in 150ppm EtOH) ≥ 3
- Lifespan: ≥5 years (in air)
SKU: 1680987 -
-
Gas and Dust Sensor
DFRobot Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)
Gas and Dust SensorDFRobot Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)
SKU: 1447263- Product: DFRobot Air Quality Monitor (PM 2.5 Formaldehyde Temperature & Humidity Sensor)
- DC Supply Voltage: Typ: 5V Min: 4.5V Max: 5.5V
- Working Current: ≤100mA
- Single Response Time: <1s
- Particle Counting Efficiency: 50%@0.3μm, 98%@>=0.5μm
SKU: 1447263 -
-
-
-
-
-
Gas and Dust Sensor
DFRobot Gravity Analog Propane Gas Sensor (MQ6) For Arduino
SKU: 1356236- Model: DFRobot Gravity Analog Propane Gas Sensor
- Circuit voltage: 5V±0.1 AC OR DC
- Heating voltage: 5V±0.1 ACOR DC
- Load resistance: 20KΩ
- Heater resistance: 33Ω±5% Room Tem
- Heating consumption of less than 750mw
SKU: 1356236 -
-
-
LiDAR Sensor
CS20 Dual-Resolution 3D TOF Solid-state LiDAR (5V, 5m)
SKU: 1605109- Model: CS20
- Depth Resolution: 640×480/320×240
- Range Ability: 0.1-5m, indoor
- VCSEL Wavelength: 940nm
- Data Transmission: USB 2.0, Type C Interface
- Power Supply: 5V, 0.5A
- Power Dissipation: 1.2W
- Operating System: Linux/Windows/ROS/Android
- Operating Temperature: -10 to 50°C
- Security: Class 1
- Size: 48mm × 34mm × 12mm/1.89×1.34×0.47″
SKU: 1605109 -
-
-
Water TDS, pH, Flow, Level and Pressure Sensor
DFRobot Non-contact Capacitive Liquid Level Sensor for Container ODgreater than 11mm
Water TDS, pH, Flow, Level and Pressure SensorDFRobot Non-contact Capacitive Liquid Level Sensor for Container ODgreater than 11mm
SKU: 1495703- Pure electronic circuit structure, non-mechanical structure, stable performance, and long working life
- High sensitivity and strong anti-interference ability, not affected by external electromagnetic interference
- Special treatment for power frequency interference, and common mode interference.
- Strong compatibility, penetrate all kinds of non-metallic container pipes, such as plastic, glass, ceramic, and other containers.
- Suitable for all types of detection of curved or flat surfaces, arcs, cylindrical containers or piping fluids
- Suitable for various circuits or applications
SKU: 1495703 -
-
-
-
-
-
Temperature & Humidity Sensor
DFRobot Gravity I2C High Temperature Sensor (K-Type, 800℃)
SKU: 1210000- 14 bit, 0.25°C digital high-resolution temperature measurement.
- Extremely wide temperature range.
- Wide input voltage, compatible with 3.3V and 5V controllers.
- Input Voltage (VCC): 3.3V~5.5V.
- Probe: K Type Thermocouple.
- Temperature Range: -270°C~1372°C.
SKU: 1210000 -
PIR / IR and Optical Sensor
DFRobot Gravity: mmWave C4001 24GHz Human Presence Detection Sensor (12 Meters, I2C & UART)
PIR / IR and Optical SensorDFRobot Gravity: mmWave C4001 24GHz Human Presence Detection Sensor (12 Meters, I2C & UART)
SKU: R110735- Operating Voltage: 3.3V
- Maximum Detection Range: 12m
- Beam Angle: 100*80°
- Modulation Mode: FMCW
- Operating Frequency: 24GHz
- Operating Temperature: -40~85℃
- Baud Rate: 9600
- I2C Address: 0x2A
SKU: R110735 -
-
Gas and Dust Sensor
DFRobot Fermion MEMS Hydrogen H2 Gas Detection Sensor (Breakout, 0.1-1000ppm)
SKU: 1680990- Compact size, measuring only 13*13*2.5mm
- Low power consumption, operating current <20mA
- High sensitivity and rapid response recovery
- Advanced MEMS technology
- Gas detected: Hydrogen (H2)
- Sensitivity: R0(in air)/Rs(in 200ppm H2) ≥ 5
- Lifespan: ≥5 years (in air)
SKU: 1680990 -
-
-
Gas and Dust Sensor
DFRobot Gravity Industrial Grade Analog ORP Sensor Meter PRO
SKU: 1356247- Brand: DFRobot
- Product: Gravity Industrial Grade Analog ORP Sensor Meter PRO
- Input Voltage: 5V
- Input Signal: 0.5V – 4.5V
- Input Interface: 5.08mm/0.20″ Pluggable Connector
- Measuring Range: -2000mV ~ +2000mV
SKU: 1356247 -
-
-
LATTEPANDA Boards
LattePanda 3 Delta 864 – The Most Powerful Windows/Linux Single Board Computer 8GB/64GB eMMC with Windows 10 IoT Enterprise License
LATTEPANDA BoardsLattePanda 3 Delta 864 – The Most Powerful Windows/Linux Single Board Computer 8GB/64GB eMMC with Windows 10 IoT Enterprise License
SKU: 1358869- CPU: Intel Celeron N5105 @2.0~2.9GHz, 4 Core and 4M Cache
- 8GB LPDDR4 @2933MHz RAM
- 64GB eMMC
- M.2 M key (support NVMe SSD), M.2 B key (support SATA SSD,4G & 5G Module)
- WiFi 6 @2.4Gb/s – Bluetooth 5.2
- Co-Processor: Arduino Leonardo
- USB Type C – USB 2.0 (Pin header)
- HDMI 2.0b, Display port 1.4 via USB-C, eDP
- Dimension: 125mm x 78mm x 16mm
- Operating System: Windows 10, Windows 11, and Linux
SKU: 1358869 -
Boards Compatible with Arduino
DFRobot Bluno Nano – Arduino Nano Compatible – Bluetooth 4.0
SKU: 1680984- On-board BLE chip: TI CC2540
- Wireless Programming Via BLE
- Support Bluetooth HID
- Support AT command to config the BLE
- Transparent communication through Serial
- Upgrade BLE firmware easily
- Bootloader: Arduino Uno
- Compatible with the Arduino Uno pin mapping
SKU: 1680984 -
Boards Compatible with Arduino
DFRobot Bluno Bee – Turn Arduino to a Bluetooth 4.0 (BLE) Ready Board
SKU: 1680983- AT command to debug the BLE
- Supports the master-salve machine switch
- Transparent transmission
- Wireless programming for Arduino processor (Compatible with Arduino UNO,Fio and Mega)
- Supports usb update BLE chip program
- Supports bluetooth HID
- Convenient to upgrade firmware of BLE
- Supports Android and IOS applications,open source code,suitable for secondary development by the user
SKU: 1680983 -
LATTEPANDA Boards
LattePanda Sigma – The Small Hackable x86 Windows/Linux Single Board Computer Server (16GB RAM/500GB SSD and WiFi 6E Module)
LATTEPANDA BoardsLattePanda Sigma – The Small Hackable x86 Windows/Linux Single Board Computer Server (16GB RAM/500GB SSD and WiFi 6E Module)
SKU: 1604135- LattePanda Sigma supports multiple display outputs.
- The Intel Core i5-1340P processor has 12 cores and 16 threads.
- Turbo frequency of 4.60 GHz and 3.4 GHz.
SKU: 1604135 -
-
-